• Journal of Acupuncture Research
• /
• v.33 no.3
• /
• pp.207-218
• /
• 2016

Objectives : The purpose of this study is to report the clinical effect of Korean Medical Treatment and acupuncture based on M-test theory & herbal medicine for treating systemic sclerosis. Methods : We treated a patient diagnosed with systemic sclerosis. We used general acupuncture & acupuncture based on M-test theory, herbal medicine, moxibustion, and physical therapy. The outcomes were evaluated by using peripheral body temperature measurement, numeric rating scale(NRS), visual analog scale(VAS), and an activities of daily living(ADL) questionnaire for systemic sclerosis. Results : The average peripheral body temperature increased from $36.16^{\circ}C$ to $36.38^{\circ}C$. The NRS showed no difference, but VAS decreased from 7.43 to 5.43. The ADL questionnaire score decreased from 17 to 12. Conclusion : This case study suggests that Korean Medical Treatment and acupuncture based on M-test theory & herbal medicine could be effective for treating systemic sclerosis. However, further studies are needed to confirm this result.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.20.1-20.7
• /
• 2015

Background: The objectives of the present study were to investigate the reliability and outcomes of computer-assisted techniques in mandibular reconstruction with a fibula flap and verify whether the surgical navigation system was feasible in mandible reconstructive surgery. Methods: Eight cases were enrolled in the computer assisted surgery (CAS) group and 14 cases in the traditional group. The shaping and fixation of the fibula grafts were guided by computer assisted techniques, which could be monitored with the BrainLAB surgical navigation system. The variation of mandible configuration was evaluated by CT measurement in the Mimics software, including the variation of length, width, height and gonial angle of the mandible. The 3D facial soft tissue alteration was also analyzed in 3D chromatogram by Geomagic software. Results: All 22 fibula flaps survived. The mandibular configurations and facial contours had a better clinic result in the CAS group. The length, width, height and gonial angle of the reconstructive mandible were more similar to the original one. The Wilcoxon rank sum test analysis suggested significant differences in the measurements. The chromatographic analysis also visually showed superiority over the traditional group. Conclusions: The computer assisted surgical navigation method used in mandibular reconstruction is feasible and precise for clinical application. The contour of the reconstructed mandible and facial symmetry are improved with computer techniques.

• The Mathematical Education
• /
• v.29 no.1
• /
• pp.21-34
• /
• 1990

This is a study on an instruction of estimation for error correction in the calculation with a computer or a calculator. The aim of this study is to survey a new aspect of calaulation teaching and the teaching strategy of estimation and finally to frame a new curriculum model of estimation instruction. This research required a year and the outcomes of the research can be listed as follows: 1. Social utilities of estimation were made clear, and a new trend of calculation teaching related to estimation instruction was shown. 2. The definition of estimation was given and actual examples of conducting an estimation among pupils in lower grades were given for them to have abundant experiences. 3. The ways of finding estimating values in fraction and decimal fraction were presented for the pupils to be able to conduct an estimation. 4. The following contents were given as a basic strategy for estimation. 1) Front-end strategy 2) Clustering strategy 3) Rounding strategy 4) Compatible numbers strategy 5) Special numbers strategy 5. In an instuction of estimation the meaning, method. and process of calculation and calculating algorithm were reviewed for the cultivation of children's creativity through promoting their basic skill, mathematical thinking and problem-solving ability. 6. The following contents were also covered as an estimation strategy for measurement 1) Calculating the sense of quantity on the size of unit. 2) Estimating the total quantity by frequent repetition of unit quantity. 3) Estimating the length and the volume by weighing. 4) Estimating unknown quantity based on the quatity already known. 5) Estimating the area by means of equivalent area transformation. 7. The ways of instructing mental computation were presented. 8. Reviews were made on the curricular and the textbook contents concerning estimation instructions both in Korea and Japan. and a new model of curriculum was devised with reference to estimation instruction data of the United States.

• Archives of Plastic Surgery
• /
• v.39 no.3
• /
• pp.227-231
• /
• 2012

Background : The ankle brachial pressure index (ABI) is a simple, useful method for diagnosing peripheral artery disease (PAD). Although the ABI is an objective diagnostic method, it has limited reliability in certain scenarios. The aim of the present study was to determine the accuracy and reliability of the toe brachial index (TBI) as a diagnostic tool for detecting stenosis in PAD, associated with normal or low ABI values. Methods : ABI and TBI values were measured in 15 patients with diabetic gangrene who were suspected of having lower extremity arterial insufficiency. The ABI and TBI values were measured using a device that allowed the simultaneous measurement of systolic blood pressure in the upper and lower extremities. In addition, the ABI and TBI values were compared pre- and post-angiography. Results : Patients with an ABI of 0.9-1.3 showed almost no difference between the 2 measurements. The patients with TBI >0.6 had no arterial insufficiency. The patients with TBI <0.6 required vascular intervention with ballooning. After the angiography, the gangrenous wounds decreased in size more rapidly than they did prior to the intervention. Conclusions : Our findings suggest that TBI is the method of choice for evaluating lower limb perfusion disorders. This result requires further studies of TBI in a larger number of patients. Future long-term studies should therefore evaluate the utility of TBI as a means of screening for PAD and the present findings should be regarded as preliminary outcomes.

• Journal of the Korean Regional Science Association
• /
• v.32 no.4
• /
• pp.3-18
• /
• 2016

National research and development(R&D) project plays an important role in the economic growth of a country as well as a company. This article aim to examine the development of the performance evaluation framework for assessing the contribution of national research and development(R&D) program to productivity growth. The main idea of this paper begins with the employment of between-group analysis for evaluating the returns to R&D. The method of this study is based on the comparison of productivity growth between different groups with time series data, not cross-sectional approach with one period. In these regards, backward effect and forward effect are operationally defined as a measurement for contributions of R&D in this study. The results of analysis gives that the outcomes of between-group analysis shows the lower performance of R&D compared to the within-group analysis. while the difference was not especially evident with the case of operating profit variable, but sales variable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.2
• /
• pp.441-453
• /
• 2015

This paper review nursing performance in Korea to suggest the direction of future research. A literature review of research nursing performance journal articles was performed. Thirty-three articles were analyzed research design, measurement tools, definition, and variables which with nursing performance. Most of the on nursing performance in Korea descriptive correlation study. There considerable confusion about Korean term and definitions nursing performance. used the instrument developed by Park (1989) to measure nursing performance. The variables with nursing performance leadership and empowerment. No agreement on definitions or concepts of nursing performance evident in Korea. Research on nursing performance that addresses all domains of nursing is needed to analyze the impact of nursing performance on patient and healthcare outcomes.

• STI Policy Review
• /
• v.1 no.1
• /
• pp.1-21
• /
• 2010

To achieve the "low carbon green growth" vision, the first step is securing core technologies. Therefore, S&T policy direction for green technology development is urgently needed. As of 2008, investment in green technology (GT) development hovered around 10% of the government's total R&D budget. Thus, the Korean government developed a plan to increase that percentage to 15%, by 2013. To develop reasonable investment strategies for green technology development, targeted strategies that reflect technology and market changes by green technology area are needed. However, the overall planning and coordination of national GT development is currently split among, approximately, 10 government ministries. To establish an efficient green technology development system, the so-called "Green Technology R&D Council" should be launched in collaboration with the Presidential Committee on Green Growth and the National Science and Technology Council. Furthermore, to build a solid foundation for commercializing the outcomes of GT development projects and promote GT transfer, the government should undertake two initiatives. First, the government should reinforce GT R&D performance management, by establishing a GT R&D performance management and evaluation system. Second, the government should implement the "customized packaged support for promoting green technology business rights and commercialization" and present "e-marketplace for market-oriented green technologies". Creating a pan-ministerial policy for GT development policy would necessitate restructuring the HR(Human Resources) development system, which is currently separated by technology area. Based upon mid/long-term HR supply and demand forecasts, the government should design differentiated HR development projects, continuously evaluate those projects, and reflect the evaluation results in future policy development. Finally, to create new GT-related industries, the "Green TCS (Testing, Certification, and Standards) System" needs to be implemented. For objective evaluation and diffusion of R&D results by green technology area, a common standardization plan for testing, analysis, and measurement, like the "Green TCS", should be developed and integrated.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.141-152
• /
• 2015

Most of agricultural structures are consisted of complex components and exposed to various boundary conditions. There have been no ways to express those structures exactly for model experiment. As an alternative, 3D printer can produce any type of solid model. However, there are limited informations related to structural experiments using 3D printer. The object of this study gives the basic informations to structural engineers who try to use 3D printer for model experiment. When PLA was used as a supplier for 3D printer, the outcomes showed less heat deformation to compare with ABS. To test the material properties, two kinds of experiments (three-point flexibility test and compression test) were executed using universal testing machine. In three-point flexibility test, plastic hinge and its deformation were developed as observed in material such as steel. The behavior was in a linear elastic state, and elastic bending modulus and yield force were evaluated. In the compression test using unbraced columns with hinge-hinge boundary condition, the constant yield forces were observed regardless of different lengths in all columns with same section size, whereas the compressive elastic modulus was increased as the length of column was increased. The suggested results can be used for model experiments of various agricultural structures consisted of single material.

• Culinary science and hospitality research
• /
• v.23 no.7
• /
• pp.194-203
• /
• 2017

The data collection and questionnaire survey were conducted from July 1, 2016, to August 30, 2016, and the final analysis was conducted with 273 copies. The collected data were analyzed using SPSS (V 23.0) and AMOS (V 21.0) programs. In order to identify the characteristics of the respondents, the frequency analysis was performed, and the reliability analysis and confirmatory factor analysis were performed for each measurement item. The conceptual reliability (CR) and standard variance extraction (AVE) values were calculated to verify the validity. Correlation analysis was conducted to measure the associations among the derived factors. For the hypothesis test, a structural equation modeling was used to test the jointness and organic causality of the whole model. In addition, an alternative model with a nested relationship with the basic model was set up to test the adjustment effect of the learner's educational environment on the educational satisfaction and behavioral intention. The purpose of the study was to examine the effect of educational environment on the educational satisfaction and behavioral intention of students at a cooking education institute in Busan. The implication of this study is that the operators of educational institutions should recognize the human factors as important means of marketing for the activation of cooking education and select instructors by applying more systematic and objective criteria when hiring instructors. Also, consideration should be given to support programs such as training programs and incentives to develop instructor's abilities. In addition, the positive educational outcomes of students may have a positive impact on financial performance, such as livelihood of other students and sales of educational institutions.