• 비파괴검사학회지
• /
• 제27권4호
• /
• pp.339-344
• /
• 2007

대형 구조물을 지탱하고 있는 케이블은 항상 높은 장력으로 당겨지고 있기 때문에 교량에 과도한 하중이 가해지면 안전에 큰 영향을 미칠 수 있다. 설계 시 하중을 고려하지만 안전관리 측면서 지속적인 감시의 필요성은 매우 크다. 교량 지지용 케이블이 강자성 재료로 구성되어 있고, 강자성 재료는 자구의 운동이 외부 장력에 매우 민감하기 때문이 케이블의 비투자율을 모니터링하면 현재 장력의 크기를 예측할 수 있다. 본 논문에서는 현장에서의 장력측정용 센서의 정확한 성능 평가를 위한 표준 장력 교정 시스템 개발을 목표로 기반 연구를 수행하고 있다. 즉 교정된 로드셀을 기준으로 시험 케이블에 정화한 힘을 가할 수 있는 시스템을 제작하였으며, 자체 제작한 장력 측정용 자기적 센서를 시험 케이블에 설치하고 케이블에 가한 장력에 따라 센서 출력을 정량적으로 분석하였으며, 주위의 환경이 미치는 영향도 함께 분석하였다.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.399-407
• /
• 2019

This research is carried out to analyze the effects of Styrene and PVP on the properties of silicone hydrogel lenses. Styrene group and PVP(Polyvinylpyrrolidone) are used as additives for a basic combination containing silicone monomer, TSMA(trimethylsilyl methacrylate) and DMA(n,n-dimethylacrylamide) added to the mix at ratios of 1~10 %. Silicone hydrogel lens is produced by cast-mold method. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before its optical and physical characteristics are measured. Measurement of the physical characteristics of the produced material shows that the refractive index is 1.3682~1.4321, water content 77.11~45.73 %, visible light transmittance 95.14~88.20 %, and tensile strength 0.0652~0.3113 kgf. The results show a decrease of refractive index as the ratio of additives and water content decreases. The result of the stabilization test of polymerization show an increase of extractables along with increase of the ratio of additives, but the difference is not significant for all samples, so it can be judged that the stabilization of the polymer is maintained. Therefore, the additions of styrene and PVP should be taken into consideration for their effects on the physical properties of silicone hydrogel lens.

• Membrane and Water Treatment
• /
• 제7권2호
• /
• pp.155-173
• /
• 2016

The present work has been focused on the development of polysulfone (PSf) ultrafiltration membrane via blending by sulfonated polyethersulfone (SPES) in order to permeability enhancement for ultrafiltration of cheese whey. In this regards, sulfonation of polyethersulfone was carried out and the degree of sulfonation was estimated. The effect of blend ratio on morphology, porosity, permeation and fouling of PSf / SPES membranes was investigated. Filtration experiments of whey were conducted for separation of macromolecules and proteins from the lactose enrichment phase. The morphology and performance of membranes were evaluated using different techniques such SEM, AFM, and contact angle measurements. The contact angle measurement showed that the hydrophilicity of membrane was increased by adding SPES. According to AFM images, PSf / SPES membranes exhibited lower roughness compared to neat PSf membrane. The water and whey flux of these membranes were higher than neat membrane. However, flux was decreased when the PSf / SPES blend ratio was 0/100. It can be attributed to pore size and morphology changes. Further, fouling parameters of PSf membrane were improved after blending. The blend membranes show a great potential to be used practically in proteins separation from cheese whey.

• 한국레이저가공학회지
• /
• 제9권3호
• /
• pp.15-21
• /
• 2006

A Polypropylene (PP) film was ablated using a femtosecond laser with a center wavelength of 785 nm, a pulse width of 184 fs and a repetition rate of 1 kHz. Increments of both pulse energy and the shot number of pulses lead to co-occurrence of photochemical and thermal effect, demonstrated by the spatial expansion of rim on the surface of PP. The shapes of the laser-ablated PP films were imaged by a scanning electron microscope (SEM) and measured a 3D optical measurement system (NanoFocus). And, the oxygen transmission rate (ORT) of periodically laser-ablated PP film were characterized by oxygen permeability tester for modified atmosphere packaging (MAP) of fresh fruit and vegetable. Our results demonstrate that femtosecond pulsed laser is efficient tools for breathable packaging films in modifying the flow of air and gas into and out of a fresh produce container, where the micropatterns are specifically tailored in size, location and number which are easily controlled by laser pulse energy and pulse patterning system.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.251-262
• /
• 2015

In this work the preparation and characterization of a membrane containing a uniform mesoporous Titanium oxide top layer on a porous stainless steel substrate has been studied. The 316 L stainless steel substrate was prepared by powder metallurgy technique and modified by soaking-rolling and fast drying method. The mesoporous titania membrane was fabricated via the sol-gel method. Morphological studies were performed on both supported and unsupported membranes using scanning electron microscope (SEM) and field emission scanning microscope (FESEM). The membranes were also characterized using X-ray diffraction (XRD) and $N_2$-adsorption / desorption measurement (BET analyses). It was revealed that a defect-free anatase membrane with a thickness of $1.6{\mu}m$ and 4.3 nm average pore size can be produced. In order to evaluate the performance of the supported membrane, single-gas permeation experiments were carried out at room temperature with nitrogen gas. The permeability coefficient of the fabricated membrane was $4{\times}10^{-8}\;lit\;s^{-1}\;Pa^{-1}\;cm^{-1}$.

• 터널과지하공간
• /
• 제19권3호
• /
• pp.248-260
• /
• 2009

직접 개발 형식의 해외자원개발과 관련하여 단순 자본 투자에서 직접 개발로 변화하고 있다. 대규모 노천 석탄광산에서의 사면 안정성과 관련하여 지하수 유동 체계 분석과 사면 보강공으로서의 수평 배수공 타당성을 인도네시아 Pasir 탄광을 대상으로 검토하였다. 본 연구에서는 지하수 체계를 특징짓기 위해 지하수 수위 분석, 현장 투수 시험, 추적자 실험 등 다양한 현장 실험 및 계측을 수행하였다. 특히, 중부 지역의 상부에 위치한 SM강과의 연계성을 분석에 중점을 두었다. Guelph 투수계수를 활용하여 투수계수를 측정하였으며, 사암이 이암이나 탄층보다 투수성이 매우 높은 것으로 나타났다. 지하수 수위 분석 결과 사암층과 협재되어 많은 균열을 포함한 얇은 탄층이 주된 지하수 유동 경로 역할을 히는 것으로 나타났다. 추적자 시험 결과 SM강이 인근 지하수계에 미치는 영향은 강 바닥의 지층구조에 따라 다른 것으로 파악되었다. 수평 배수공의 효과를 파악하기 위한 2차원 지하수 유동 해석 결과는 폭이 좁은 탄층이 협재되어 있는 지층과 사암층이 주된 지하수 유동 경로이며, 충분한 심도로 수평 배수공 시공시 사면 안정화에 효과가 있는 것으로 파악되었다. 따라서 수평 배수공의 시공 위치와 시공 심도의 결정을 위해서는 지층 구조의 파악이 선행되어야 한다.

• 대한토목학회논문집
• /
• 제29권2A호
• /
• pp.171-179
• /
• 2009

콘크리트의 공극률은 유해인자의 주된 이동통로가 될 뿐 아니라, 수분을 보유할 수 있는 역할을 하게 되므로, 열화물질 이동 저항성을 평가할 수 있는 주된 지표가 되고 있다. 내구성에 대한 연구가 중요해짐에 따라, 공극구조를 기본으로 하는 열화모델이 최근 들어 개발되고 있으며, 공극구조와 내구특성간의 관계는 매우 중요하게 평가되고 있다. 본 연구는 5가지의 다른 물-시멘트비(40%, 45%, 50%, 55%, 60%)를 가진 시멘트 모르타르를 제조하여, 공극률을 포함한 다양한 내구성 실험을 수행하였다. 내구특성 실험은 기본적인 압축강도 실험을 포함하여, 투기성 실험, 염화물 확산계수 실험, 흡수율 및 수분 확산계수 실험 등이 수행되었다. 평가된 내구성 실험결과는 물-시멘트비와 공극률에 따라 분석되었다. 공극률이 1.45 배 높아질수록, 강도는 0.6배 수준으로 감소하였으며, 투기성, 염화물 확산계수, 흡수율, 수분확산계수는 각각 2.3배, 2.1배, 5.5배, 그리고 3.7배 수준으로 증가하였다. 이러한 내구특성 변화율은 높은 상관성을 보이며, 공극률에 따라 선형적으로 변화함을 알 수 있었다. 한편, 실험결과와 문헌분석을 통하여, 목표내구성능을 설정하였으며, 이에 따라서 고내구성 콘크리트를 위한 공극를을 제안하였다.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.786-789
• /
• 2011

본 연구에서는 고체산화물연료전지에서 사용되고 있는 전해질의 직접탄소연료전지로의 적용가능성을 평가하기 위해 YSZ 전해질의 특성을 평가하였다. 전해질 층은 진공 슬러리 코팅 법을 사용하여 연료극 지지체위에 형성하였으며, 코팅 후 $1,400^{\circ}C$에서 5시간 동안 열처리하여 미세조직, 가스투과도 및 이온 전도도 측정을 통해 직접탄소연료전지로의 적용가능성을 확인하였다. YSZ 전해질은 얇고 치밀한 층을 형성하였으며 낮은 가스 투과도 값을 나타내었다. 이와같은 결과를 바탕으로 직접탄소 연료전지에 YSZ 전해질을 적용하였으며, 단위전지를 제작하여 $800^{\circ}C$에서 성능평가를 수행하였다.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.145-154
• /
• 2013

Recently, damage occurrence by wind erosion has been increasing in society. In times past, such problems only took place in desert area ; however, in recent years, the wind erosion problem is spreading out to agricultural land. Wind erosion in agricultural land can cause loss of loam soils, the disturbance of the photosynthesis of the crop fields and serious economic losses. To overcome the mentioned problems, installation of windbreak fence can be recommended which function as disturbing strong wind and wind erosion. However, there is still no proper guideline to install the windbreak fence and the installation used to rely on the intuition of the workers due to the lack of related studies. Therefore, this study measured the aerodynamic resistance of screens of the windbreak fence using the apparatus for testing screens. The apparatus for testing screens was designed to measure pressure loss around the screen. Measured pressure loss by wall friction compensated for pressure loss to calculate the aerodynamic resistance of screens. The result of pressure loss by regression analysis derived the aerodynamic coefficient of Darcy-Forchheimer equation and power law equation. The aerodynamic resistance was constant regardless of the overlapped shape when the screen was overlapped into several layers. Increasing the number of layers of the screen, internal resistance increased significantly more, and pressure loss caused by the screen also increased linearly when the wind speed was certain conditions, but permeability had no tendency. In the future, the results of this study will be applied to the computational fluid dynamics simulation. The simulation models will be also validated in advance by wind tunnel experiments. It will provide standard of a design for constructing windbreak fence.

• 패션비즈니스
• /
• 제19권4호
• /
• pp.120-134
• /
• 2015

This study aimed to determine the physical properties of silk and nylon fabrics that are treated with persimmon juice in accordance with irradiation time of ultraviolet spectrum. Persimmon juice dyeing has the advantage of using the tannin component of the persimmon. Tannin plays an important role in inhibiting photodegradation of fibers or polymers. Among fibrous materials, silk and nylon are prone to deterioration by light. Hence, this study aimed to reduce these weaknesses of silk and nylon by applying persimmon juice treatment. We accordingly carried out investigation and experiments on ultraviolet irradiation, and physical characteristics of treated fabrics. The persimmon juice treatment process led to increased weight and thickness. In addition, the air permeability of silk fabric was increased, as compared to the control specimen; whereas, that of nylon fabric was decreased. Both drape stiffness and flex stiffness of silk and nylon tended to be high in textiles processed with persimmon juice treatment, as compared to the control textile. Peak load and elongation at peak load of untreated samples clearly decreased in both silk and nylon fabrics with the increase of ultraviolet irradiation time, while those of persimmon juice treated samples increased. Furthermore, ultraviolet blocking ratio measurement indicated that the fabric specimens treated with persimmon juice blocked U.V. spectrum better than the control specimen.