• 제목/요약/키워드: Out-of-permeability measurement

검색결과 39건 처리시간 0.024초

고분자 수지 이송 성형에서 브레이드 프리폼의 두께방향 투과율 계수 측정 (Out-of-Permeability Measurement of the Braided Preform in Resin Transfer Molding)

  • Suk, Chae-Hui;Seok, Song-Yeong;Ryun, Yun-Jae
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2003년도 추계학술발표대회 논문집
    • /
    • pp.87-90
    • /
    • 2003
  • In Resin transfer molding (RTM), composite parts are produced by impregnation of a dry reinforcement with liquid matrix resin. Permeability is a key issue in this process. For thin parts, the resin flow in the thickness direction can be neglected. Therefore thin parts are considered as two-dimensional composites. However the resin flow through the thickness is important to thicker parts and we have to consider out-of-plane permeability. This work discusses a method to measure out-of-plane permeability. The flow rate and pressure drop across the porous media were measured. Also one dimensional form of Darcy's law is applied to calculate the out-of-plane permeability of various preforms. The flow is injected uniformly into layers of the preform. And a circular fiber mat with 6cm diameter was cut and flattened from cylindrical mandrel.

  • PDF

치밀가스 저류층의 저투과도 측정에 관한 실험적 연구 (Experimental Study on the Measurement of the Low Permeability in Tight Gas Reservoir)

  • 장호창;신창훈;이정환
    • 한국가스학회지
    • /
    • 제18권3호
    • /
    • pp.20-30
    • /
    • 2014
  • 비전통가스 자원을 개발하기 위해서는 저류층 암체의 치밀성을 도출하는 물성 분석이 요구된다. 특히, 치밀가스와 같은 비전통자원의 경우, 전통적인 천연가스전과 비교하여 투과도가 특징적으로 낮아서 통상적인 물성 측정 기술을 적용하기에는 한계가 있다. 이에 본 연구에서는 비정상상태에서 저투과성 암체의 물성을 측정하는 압력펄스감소법을 기반으로 실험 장치를 개발하였다. 개발된 기기는 우리나라 경상분지 치밀사암의 물성 분석에 이용되었으며, 각 시료의 투과도와 공극률을 도출하였다. 또한, 실험을 통해 얻은 자료와 이론해 모델 간의 회귀분석 결과 모두 0.96 이상의 상관계수를 나타냈으며, 개발된 장치에 대한 높은 신뢰성을 확인할 수 있었다.

Vapor Permeability and Moisture Gradient on a Paulownia Wood for Inside Material of Furniture Making

  • Lee, Won-Hee
    • 한국가구학회지
    • /
    • 제19권6호
    • /
    • pp.447-451
    • /
    • 2008
  • This study was carried out to know the difference of vapor transmission on the thickness of Paulownia wood(Paulownia tomentosa). The behavior of moisture transmission of wood thickness direction is generally estimated by vapor permeability and vapor transmission resistance. In general, Paulownia wood is known to use of inside material for furniture making, because of the excellent ability of vapor adsorption and/or desorption. Quarter sawing Paulownia wood material is prepared and the thickness is 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, respectively. The measurement of vapor transmission were conducted by the "cup method" in accordance with JIS(Japanese Industrial Standard) Z-0208. The experiment was made in the condition of 49.8mmHg vapor pressure difference and $40^{circ}C$ at constant temperature. From the experiment results, it was considered that Paulownia wood is very stable on moisture variation and any other material conditions. In this experiment we found that the vapor permeability and vapor permeance was reduced with the increase of wood thickness to vapor direction and vapor transmission resistance and specific vapor transmission resistance was increased with the increase of wood thickness to vapor direction. Besides moisture contents of adsorption and desorption side were about 5 percent and 14 percent, respectively. Mean value was 9.5 percent and about 10 percent in dry oven method. Moisture gradient was reduced with the increase of wood thickness for a small moisture difference of adsorption and desorption side.

  • PDF

포항 지열 개발지역에서의 지열 저류층에 대한 SP 모델링

  • 임성근;이태종;송윤호;;송영수
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
    • /
    • pp.417-421
    • /
    • 2004
  • Self-potential (SP) survey was carried out at Pohang geothermal field. SP measurement showed clear positive anomaly at northern part of the test wells, which can be a up-flow zone of the deep geothermal water due to electrokinetic potential generated by hydrothermal circulation. To give a clearer image of the fluid flow pattern around the test wells, a two-dimensional numerical simulation was applied to construct a numerical block model of the fluid flow system based on SP and magnetotelluric survey results. The result suggests existence of two high permeability zones including the main manifestation area in the northern part of the test wells.

  • PDF

서울시 배수성 아스팔트 포장의 기능적 평가 연구 (Study on the Functional Evaluation of Permeable Asphalt Concrete Pavement in Seoul City)

  • 이상염;김인태;문성호;권수안
    • 한국도로학회논문집
    • /
    • 제14권3호
    • /
    • pp.33-39
    • /
    • 2012
  • 배수성 포장에 있어 기능적 평가인 투수성 실험과 더불어 소음저감 측정을 서울시에서 시공한 구간에서 실시하였다. 소음측정은 두 가지 방법을 이용하였는데 그 방법은 Pass-by 방법과 NCPX(Novel Close Proximity) 방법을 이용하였다. Passby 방법은 교통량에 따른 소음원이 전달되는 것을 측정하는 방법이고, NCPX는 타어어와 포장 표면간의 마찰음을 측정하는 방법이다. 현장투수시험을 위해서는 총 5개의 구간에서 실시하였으며 각 구간마다 주행부와 비주행부로 나뉘어 측정하였다. 3개 구간의 Pass-by 측정을 위해서는 교통소음원 발생점으로부터 인접한 곳에서 측정을 실시하였고 또한 공원내부 혹은 단지 내부에서도 소음을 측정하였다. 마지막으로 NCPX 측정은 4군데서 실시하였다. 결과적으로 배수성 포장의 기능인 투수성과 소음저감이 2, 3년 사이에서는 그 기능을 잘 유지함을 알 수 있었다.

다양한 파쇄 유체별 파쇄압력, 투과도 증진 및 균열전파에 관한 실험적 연구 (Experimental Study on Fracture Pressure, Permeability Enhancement and Fracture Propagation using Different Fracture Fluids)

  • 최준형;이현석;김도영;남정현;이대성
    • 터널과지하공간
    • /
    • 제31권1호
    • /
    • pp.41-51
    • /
    • 2021
  • 치밀 저류층의 투과도 증진을 위해 개발된 수압파쇄 기술은 셰일가스와 같은 비전통자원과 심부지열 개발에 필수적인 기술 중 하나이다. 파쇄형태가 단순하고 파쇄효율이 좋지 않은 수압파쇄를 개선하기 위해 다양한 파쇄유체를 이용한 실험적 연구가 진행되었다. 물, N2, CO2 가스를 파쇄유체로 사용하여 치밀 암석에 대한 파쇄형태와 효율성을 분석하였다. 파쇄유체로 물을 일정 주입속도로 주입한 경우 순간적으로 압력이 상승하여 파쇄가 발생하였으나, 파쇄유체로 가스를 주입한 경우 서서히 압력이 증가되면서 물보다 낮은 파쇄압력을 보였다. 3D 단층촬영 기법을 이용하여 물과 가스 주입으로 생성된 균열을 관찰한 결과는 기존 공극부피 대비 파쇄 자극부피가 각각 5.71%(물), 12.72%(N2), 43.82%(CO2) 증가되었다. 또한 파쇄유체의 파쇄 효율성을 검정하기 위한 파쇄 전후 투과도 변화 실험에서는 가스 파쇄에 의해 증가되는 투과도 증가 값이 물을 이용한 파쇄보다 훨씬 높게 측정되었다. 파쇄 이후 인공균열의 생성과 주변응력에 의해 다시 균열이 닫히는 현상을 고려하여 생성된 인공균열에 구속압을 단계별로 증가시켜 투과도 변화를 측정하였다. 구속압이 2MPa에서 10MPa로 증가시켰을 경우 초기 투과도 대비 각각 89%(N2), 50%(CO2) 감소하였다. 본 연구는 가스파쇄기술이 수압파쇄보다 투과도 증진 효과가 크고 이후 주변 응력에 의한 투과도 감소가 적은 것으로 나타났다.

NiCuZn 페라이트의 제조 조건에 따른 전자파흡수 특성에 관한 연구 (A Study on the Electromagnetic Wave Absorption Properties by the Preparing Condition of NiCuZn Ferrite)

  • 이영구;박찬규;이문수
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
    • /
    • pp.304-309
    • /
    • 2001
  • With the development of electromagnetic communication technology and increased use of electromagnetic wave, the countermeasure of EMI(Electromagnetic Interference) becomes more important socially, and interest for the electromagnetic wave absorber has also increased. In this paper, we have studied characteristics of frequency dependency on complex permittivity and complex permeability according to the changes of composition rate and sintering temperature of NiCuZn ferrite also known as electromagnetic wave absorber and further looked into effect of electromagnetic wave absorption properties. From the measurement where the composition of Fe$_2$O$_3$ and ZnO of NiCuZn ferrite was fixed at 49 and 34 mol% respectively while composition of NiO and CuO has been varied at each test, we found out that initial permeability and permittivity were high and the absorbing ability of electromagnetic wave recorded best with loss tangent(${\mu}$r"/${\mu}$r′) displays more than 1 within the frequency band of 2MHz~9.5MHz when the composition ratio of NiO was ranged around 8.5~9.5 mol% and the sintering temperature was 1,080$^{\circ}C$.

  • PDF

Hydraulic behaviour of dune sand-bentonite mixtures under confining stress

  • Gueddouda, M.K.;Lamara, M.;Abou-bekr, N.;Taibi, S.
    • Geomechanics and Engineering
    • /
    • 제2권3호
    • /
    • pp.213-227
    • /
    • 2010
  • Compacted layers of sand-bentonite mixtures have been proposed and used in a variety of geotechnical projects as engineered barriers for the enhancement of impervious landfill liners, cores of zoned earth dams and radioactive waste repository systems. This paper presents a study on the valorization of local materiel such as dune sand from Laghouat region and mine bentonite intended for the realization of liner base layers in the conception of insulation barriers for hazardous waste centers. In the practice we try to get an economical mixture that satisfies the hydraulic and mechanical properties specified by regulation rules. The effect of the bentonite additions on the mixture is reflected by its capability of clogging the matrix pores upon swelling. In order to get an adequate dune sand-bentonite mixture, an investigation on hydraulic and mechanical behaviours is carried out in this study for different mixtures. Using oedometer test, the adequate bentonite addition to the mixture, which satisfies the conditions on permeability, is found to be around 12% to 15%. These results are also confirmed by direct measurement using triaxial cell.

연속흐름방식에 의한 기체투과특성 측정 및 분석 (Evaluation of Gas Transport Parameters through Dense Polymeric Membranes by Continuous-Flow Technique)

  • 염충균;이정민;홍영택;김성철
    • 멤브레인
    • /
    • 제9권3호
    • /
    • pp.141-150
    • /
    • 1999
  • 비다공성막을 통한 기체 투광성분의 투과 transient와 투과 조성을 on-line 방식으로 측정할 수 있는 기체 투과장치를 개발하였다. 측정은 연속흐름방식으로 이루어지며 측정한 투과 transien로부터 여러 가지의 투과특성, 즉, 투과계수, 확산계수, 용해계수 등을 동시에 평가할 수 있다. 잘 알려진 유리상 고분자인 두 가지 폴리이드막과 고무상의 고분자인 실리콘막을 선택하여 여러 가지의 기체투과 특성들을 측정하여 문헌치와 비교함으로써 투과장치 및 측정방법에 대한 신뢰성, 정확성을 확인하였다. 또한 측정한 투과 transient를 분석함으로써 막을 통한 기체 투과거동을 좀더 자세하게 다양하게 분석할 수가 있다.

  • PDF

피압지하수에 의한 자연사면 연약층내의 간극수압 반응에 관한 모형 실험 연구 (A Laboratory Model Study on the Reactions of the Pore Water Pressure in the Weakened Layer of a Natural Slope by the Confined Groundwater)

  • 정두영;이광준
    • 대한토목학회논문집
    • /
    • 제14권3호
    • /
    • pp.583-594
    • /
    • 1994
  • 자연사면 붕괴의 주요인의 하나는 연약층에서의 간극수압 상승이다. 따라서 이 연약층내의 간극수압 계측이 중요하다. 본 연구는 피압지하수위, 풍화암반 파쇄대의 투수성 그리고 연약층의 풍화정도를 고려한 간극수압 계측의 실내모형 실험이다. 제3기층 붕괴형과 붕괴성 붕괴형의 모형으로 피압지하수 상태에서 filter의 투수성에 따른 연약층내에서의 간극공기압 및 간극수압의 반응을 측정하였다. 간극압의 반응양상에 있어서 제3기층 붕괴형은 시간 변화에 따라 반응양상이 계단형(step type)으로 나타났고 붕괴성 붕괴형은 파형(wave type)으로 나타났다. 간극수압 반응율은 제3기층 붕괴형이 붕괴성 붕괴형보다 크며, 연약층의 풍화도의 증가에 따라 간극수압 반응율은 감소하였다.

  • PDF