• Korean Journal of Acupuncture
• /
• v.30 no.4
• /
• pp.305-318
• /
• 2013

Objectives : The aim of this study was to examine the effect of electroacupuncture(EA) at an acupoint, HT8(Sobu), on normal humans by using power spectral analysis. We examined the effect on the Heart Rate Variability(HRV), and the balance of the autonomic nervous system. Methods : Thirty-two healthy volunteers participated in this study. EEG(Electroencephalogram) power spectrum exhibits site-specific and state-related differences in specific frequency bands. A thirty-two channel EEG study was carried out on thirty-two subjects(14 males; mean age=23.5 years old, 18 females; mean age=21.5 years old). HRV and EEG were simultaneously recorded before and after acupuncture. Results : In the ${\alpha}$(alpha) band, during the HT8-acupoint treatment, the power values in the ${\alpha}$(alpha) band significantly decreased(p<0.05) at 28 channels. In the ${\beta}$(beta) band significantly decreased(p<0.05) at 26 channels. In ${\delta}$(delta) band significantly decreased(p<0.05) at 18 channels. In ${\theta}$(theta) band significantly decreased(p<0.05) at 20 channels. ${\alpha}/{\beta}$ values were increased at 6 channels and decreased at 10 channels.${\beta}/{\theta}$ values were increased at 10 channels and decreased at 19 channels. Mean-RR(RR-interval), Complexity, RMSSD(Root mean square of successive differences), SDSD(Standard deviations differences between adjacent normal R-R intervals), norm HF showed a significantly increased and mean-HRV, norm LF, LHR(LF/HF Ratio) showed a significantly decreased after HT8-acupoint treatment(p<0.05). Conclusions : These results suggest that EA at the HT8 mostly causes significant changes on alpha(28 channels), beta(26 channels), delta(18 channels), theta(20 channels) bands and mean-HRV, mean-RR, complexity, RMSSD, SDSD, norm LF, norm HF and LHR. If practicing EA at the HT8, it will regulate the function of the cerebral cortex, decrease activity of the sympathetic and increase parasympathetic nervous activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.24-35
• /
• 2018

In wireless communications environments, a link adaptation technique that selects the proper rate from among several transmission rates is adopted to cope with variations in channel status. In block coded modulation, the frame time and/or the block length can be adjusted to the channel status. A smaller frame time can cause inter-frame interference (IFI), however, a larger frame time can reduce the data rate. Therefore, frame time is the design factor decided by a tradeoff between performance and the data rate. This paper presents a method to determine the frame time based on the processing gain for the channel model, CM1~CM4, recommended by IEEE 802.15a. Also, a link adaptation technique for block coded modulation is proposed for efficient communications by varying the frame time and the block length. Through simulation, link adaptation can be carried out with a step size of 2~5 nsec in a frame time range of 14~ 50 nsec for channel models CM1~CM4.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.61-69
• /
• 2017

The study on interference channel is very important information theoretically and many studies have been done on it. However, even in the simplest case, even in the case of two user interfering channels, the channel capacity is not yet known except in special cases. Recently, research on the multiplexing gain that shows the tendency of the transmission rate in the high signal to noise ratio (SNR) band has been actively carried out, instead of accurately grasping the channel capacity. Obtaining optimal multiplexing gain can reveal trends in channel capacity at high signal-to-noise ratio bands. In an interfering channel with two users, the best multiplexing gain can be obtained by eliminating the interference. However, recent research shows that when the number of users is more than three, the optimal multiplexing gain can not be obtained only by zero forcing and a new technique called interference sorting is needed. There are two types of interference sorting techniques. Beamforming A method of effectively separating signals and interference by properly selecting matrices and constructing structured codes using rational numbers and irrational numbers. The interference alignment technique can achieve optimal multiplexing gain in various environments such as interference channel, X channel, compound broadcast channel, and multi hop network for multi source multi destination. In recent years, it has also been applied to distributed storage. Lee et al., "Lattice Code Interference Alignment in Cooperative Multipoint Transmission (COMP) for Interference Channels of Three Users", Journal of the Institute of Electronics Engineers, vol.49-TC,no.6,2012. In this paper, the DoF of delayed channel information is obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.769-778
• /
• 2017

In this paper, a self-interference signal cancellation(SIC) circult for In-band Full-Duplex has been developed and tested in RF/analog region. By use of this SIC circuit, a FM two-way radio has been developed working at FRS(Family Radio Service) band. The two-way radio device is transmitting the FM modulated signal and demodulating the wanted FM signal at the same time. A circulator is used to enable a single antenna to transmit and receive simuultaenously. The receiver circuit needs to cancel out the self-interference signal due to the transmit signal. A vector modulator(VM) is used to control the phase and magnitude of the esitmated signal. And in-phase and quadrature correlators are used to figure out the optimal coefficients of the VM to remove the self-interference signal according to the change of channel environment. In this work, SA58646 has been used as the FM transceiver, and the system is tested with a frequency of 465 MHz and a bandwidth of 12.5 kHz FM signal. The output power is 17.2 dBm at the antenna port, and the self intererence signal level is measured -49.2 dBm at the receiver end. Therefore the SIC level is measured by 66.4 dB.

• The Korean Journal of Pharmacology
• /
• v.32 no.1
• /
• pp.57-66
• /
• 1996

To investigate properties of Ca-release channel in the reptile skeletal muscle, electrophoretical analysis, purification of RyR, $[^3H]ryanodine$binding study, and $^{45}Ca-release$ were carried out in the SR vesicles prepared from the snake skeletal muscle. The snake SR vesicle has the single high molecular weight protein band on SDS-PAGE, and its mobility was similar with that of rat skeletal SR vesicles. The high molecular weight band on SDS-PACE was found in the $[^3H]ryanodine$ peak fractions $(Fr_{5-7})$ obtained from the purification step of the RyR. Maximal binding site and Kd of the snake SR RyR were 6.36 pmole/mg protein and 17.62 nM, respectively. Specific binding of $[^3H]ryanodine$ was significantly increased by calcium and AMP (P<0.05), but not or slightly inhibited by tetracaine, ruthenium red (5.4%), or $MgCl_2$ (21%). $^{45}Ca-release$ from the SR vesicles loaded passively was significantly increased by the low concentration of calcium $(1{\sim}10{\mu}M)$ and AMP (5 mM)(P<0.05), but significantly decreased by the high concentration $(300{\mu}M)$ of calcium, tetracaine (1 mM), ruthenium red $(10{\mu}M)$, and $MgCl_2$ (2 mM)(P <0.05). From the above results, it is suggested that snake SR vesicles also have the RyR showing the similar properties to those of mammalian skeletal RyR with the exceptions of no or slight inhibition of $[^3H]ryanodine-binding$ by tetracaine, ruthenium red, or $MgCl_2$.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1654-1659
• /
• 2014

Tunneling field-effect transistors (TFETs) are very applicable to low standby-power application by their virtues of low off-current ($I_{off}$) and small subthreshold swing (S). However, low on-current ($I_{on}$) of silicon-based TFETs has been pointed out as a drawback. To improve $I_{on}$ of TFET, a gate-all-around (GAA) TFET based on III-V compound semiconductor with InAs/InGaAs/InP multiple-heterojunction structure is proposed and investigated. Its performances have been evaluated with the gallium (Ga) composition (x) for $In_{1-x}Ga_xAs$ in the channel region. According to the simulation results for $I_{on}$, $I_{off}$, S, and on/off current ratio ($I_{on}/I_{off}$), the device adopting $In_{0.53}Ga_{0.47}As$ channel showed the optimum direct-current (DC) performance, as a result of controlling the Ga fraction. By introducing an n-type InGaAs thin layer near the source end, improved DC characteristics and radio-frequency (RF) performances were obtained due to boosted band-to-band (BTB) tunneling efficiency.

• Journal of Pharmacopuncture
• /
• v.6 no.3
• /
• pp.91-106
• /
• 2003

Objectives : The aim of this study was to examine the effects of electroacupuncture(EA) at the PC6(Naegwan) and the TE5 (Oegwan) on nounal humans using power spectral analysis. Methods : EEG power spectrum exhibit site-specific and state-related differences in specific frequency bands. In this study, power spectrum was used as a measure of complexity. 30 channel EEG study was carried out in 30 subjects(30 males ; age=23.7 years). Results : In ${\alpha}$(alpha) band, the power values at F7 channels(p<0.05) during the PC6-acupoint treatment were significantly were decreased. In ${\beta}$(beta) band, the power values at Fp1, Fz, TT1, T5, P3, P4, Po1, P02, O1, Oz, O2 channels(p<0.05) during the non-acupoint treatment and at Fp1, F4, F8 channels(p<0.05) during the TE5-acupoint treatment significantly were increased. In ${\theta}$(theta) band, the power values at Fp1 channels(p<0.05) during the non-acupoint treatment and at Oz channels(p<0.05) the TE5-acupoint treatment significantly were increased. but, the power values at F7 channels(p<0.05) during the non-acupoint treatment were significantly were decreased. In ${\delta}$(delta) band, the power values at TCP1, TCP2, CP1, T5 channels(p<0.05) during PC6-acupoint treatment were increased and the power values at F7, TT2 channels(p<0.05) during non-acupoint treatment were increased. but, the power values at the TE5-acupoint treatment significantly was decreased than the before-acupuncture treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.91-99
• /
• 2018

This paper has proposed a low-noise and high-linear RF receiver supporting TV white space from 470 MHz to 698 MHz), which is implemented in $0.13-{\mu}m$ CMOS technology. It consists of a low-noise amplifier, a RF band-pass filter, a RF amplifier, a passive down-conversion mixer, and a channel-selection low-pass filter. A low-noise amplifier and RF amplifier provide a high voltage gain to improve the sensitivity level. To suppress strong and nearby interferers, two RF filtering schemes have been performed by using a RF BPF and a down-conversion mixer. The proposed LPF has been based on the common-gate topology and adopted a bi-quad cell to achieve -24dB/oct characteristics. In addition, the RF receiver can support the overall TV band by controlling a LO frequency. The simulated results show a voltage gain of 56 dB, a noise figure of less than 2 dB, and an out-of-channel IIP3 of -2.3 dBm. It consumes 37 mA from a 1.5 V supply voltage.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.244-250
• /
• 2012

In this paper, worldwide standards and regulations on broadcasting services are reviewed to improve the fringe area of terrestrial DTV broadcasting services. Using these results, in-band/out-of-band emission requirements of low power DTV repeater with 10mW/MHz radiating power are proposed, and experimentally evaluated and verified. Using the proposed regulations, compact and cost-effective DTV repeater can be easily implemented to broaden DTV broadcasting coverage and to improve small/medium size DTV fringe areas.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.299-300
• /
• 2010

This paper presents experimental results on frequency interference phenomena between WiFi and ZogBee communication systems which are used for wireless communication in a port. When communication systems use a frequency band in a region, it hurts communication reliability. Hence, understanding and analysis on frequency interference phenomena through experiments. With various experiments between WiFi and ZigBee, we find out that 26th channel of ZigBee collides with WiFi communication channels, which is unknown result yet.