• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.288-291
• /
• 2012

We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz, and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.

• Transactions on Electrical and Electronic Materials
• /
• 제6권5호
• /
• pp.229-232
• /
• 2005

Direct characterization of band alignment at chemical bath deposition $(CBD)-CdS/Cu_{0.93}(In_{1-x}Ga_x)Se_2$ has been carried out by photoemission spectroscopy (PES) and inverse photoemission spectroscopy (IPES). Ar ion beam etching at the condition of the low ion kinetic energy of 400 eV yields a removal of surface contamination as well as successful development of intrinsic feature of each layer and the interfaces. Especially interior regions of the wide gap CIGS layers with a band gap of $1.4\~1.6\;eV$ were successfully exposed. IPES spectra revealed that conduction band offset (CBO) at the interface region over the wide gap CIGS of x = 0.60 and 0.75 was negative, where the conduction band minimum of CdS was lower than that of CIGS. It was also observed that an energy spacing between conduction band minimum (CBM) of CdS layer and valance band maximum (VBM) of $Cu_{0.93}(In_{0.25}Ga_{0.75})Se_2$ layer at interface region was no wider than that of the interface over the $Cu_{0.93}(In_{0.60}Ga_{0.40})Se_2$ layer.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1400-1402
• /
• 2003

The objective of this paper is to determine the suitable spectral bands for monitoring growth status change during a long period. The long-term ground-level reflectance spectra as well as LAI and biomass were obtained in xiaotangshan area, Beijing, 2001. The narrow-band NDVI type spectral indices by all possible two bands were calculated their correlation coefficients R$^2$ with biomass and LAI. The best NDVIs must have higher R$^2$ with both biomass and LAI. The reasonable band centers and band widths were determined by a systematically increasing bandwidth centered over a wavelength. In addition, the first 19 bands of MODIS were simulated and investigated. Each developed spectral indices was then validated by the biomass and LAI time series using the generalized vector angle. It turned out that six new NDVI type indices within 750-1400nm were developed. NDVI(811_10,957_10) and NDVI(962_10,802_10) performed best. No satisfactory conventional NDVI formed by red and NIR bands were found effective. MODIS_NDVI(band19, band17) and MODIS_NDVI(band19, band2) were much better than MODIS_NDVI(band2,band1) for growth monitoring.

• 소성∙가공
• /
• 제5권2호
• /
• pp.122-129
• /
• 1996

The main objective of the study is to offer some basic information in relation to optimal shape and dimensions of the rotating band through the development of three-dimensional finite element method for metal forming analysis of the rotating band whose primary function is to impart spin to the projectile. The three-dimensional metal forming analysis of the rotating band has perfor-med by using recurrent boundary conditions. Such design factors as the outside diameter the total length and the profile of the rotating band must be considered carefully in order to design an optimal rotating band. Above design factors can be determined from such available analysis results as the deformed shape and the deformation load. of the rotating band and the normal pressure of the rotating band on a projectile shell. The remeshings are needed to carry out plastic deformation analysis with severe deformation through which the complete process analysis gets possible. The results can be utilized effectively in determining the optimal shape and size of the rotating band.

• 한국동물학회지
• /
• 제31권3호
• /
• pp.225-235
• /
• 1988

spirometra ernacei의 제3기 유충 plerocercoid(sparganum)를 중간숙주인 흰쥐와 종숙주인 고양이에게 감염시켜서 회수한 sparganum과 성충의 non-specific esterase와 acid,alkaline phosphatased의 분포 및 isozyme pattern 변화를 비교하기 위하여 효소조직화학적 방법과 전기영동법을 이용하여 다음과 같은 결과를 얻었다. 첫째,non-specific esterase는 sparganum과 성체의 근층과 유조직층에 많이 분포하였고 표피층에는 거의 분포가 없었다. 이의 isozyme band pattern은 sparganum에서 7개의 성체에서 8개의 isozyme band로 분리 되었는데 sparganum과 성체의 major band는 각각 3번과 4번 band였다. 둘째,acid phosphatse는 sparganum과 성체의 표피층과 근층에서 많이 부포하였고 유조직층에는 거의 분포가 없었다. isozyme band pattern은 sparganum과 성체에서 각각 3개의 band로 분리되었는데 3번 band가 major band였다.셋째, alkaline phoosphatase는 sparganum과 성체의 표피층과 근층에서 많은 분포를 보였으며 유조직층에서 더 상당한 분포가 있었다. isozyme band pattern은 sparganum에서 2개 성체에서 4개가 분리되었는데 sparganum성체 모두 2번 band가 major band였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.31-35
• /
• 1996

The cross section of the circular rod type workpiece to be cut in the band saw machine is variable at every moment in the sawing process. When the cutting feed rate is fixed to the constant speed, the cutting edges of the band saw teeth are also variabl eat any moment, so this causes the wear of the land saw teeth and the deterioration of the quality in the surface roughness. In this study, to work out this kind of problem basically, the mean cutting force of a tooth in the band saw was estimated by using the workpiece which was smaller than the interval of each tooth, i.e. band saw pitch, in the thickness. Then the static cutting forces were predicted by appling the mean cutting forces referred above to the mechanistic cutting force model which were analyzed through the geometric profile of a band saw tooth.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.367-370
• /
• 2015

Monolayer transition metal dicalcogenide (TMDC) materials are currently attracting extensive attention due to their distinctive electronic, transport, and optical properties. For example, monolayer $MoS_2$ exhibits a direct band gap in the visible frequency range, which makes it an attractive candidate for the photocatalytic water splitting. For the photoelectrochemical water splitting, the appropriate band edge positions that overlap with the water redox potential are necessary. Similarly, appropriate band level alignments will be crucial for the light emitting diode and photovoltaic applications utlizing heterojunctions between two TMDC materials. Carrying out first-principles calculations, we here investigate how the band edges of $MoS_2$ can be adjusted by surface ligand functionalization. This study will provide useful information for the realization of ligand-based band engineering of monolayer $MoS_2$ for various electronic, energy, and bio device applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.77-81
• /
• 2000

본 글은 국내에서 사용될 예정인 26GHz대 무선가입자회선용 무선설비의 가드 밴드와 기술기준에 관한 것이다. 사업자간의 가드 밴드를 결정하기 위해서 본 글에서는 인접대역을 사용하는 타 무선국과의 전파간섭을 분석하였다. 그리고 본 글에서는 ITU-R 권고와 일본 ARIB 규격을 고려한 26GHz대 무선가입자회선용 무선설비의 블록 외 발사마스크 초안을 제안하였다.

• 한국환경보건학회지
• /
• 제32권6호
• /
• pp.560-565
• /
• 2006

Extract of DNA for analysis of fragile X syndrome is usually performed by blood, the researches using hair root as specimen have been gradually spread. In this study, analyze fra X gene of the patients in mentally retarded children facilities was conducted using hair root DNA with molecular biologic test (PCR). The number of total subjects was 24, boys were 12, the average age was $17({\pm}3)$, and girls were 12, the average age was $18({\pm}2)$. In girls, normal size of band of 222 bp appeared in all lanes. Also, in all lanes except control in 517 bp, micro band appeared. Moreover, with appearance of band of 1198bp in lanes 2, 3, 4, 5, it is estimated that it is the band of full mutation whose CGG repeated sequences are more than 200. But it showed the peculiarity that it appeared with normal band in all the same lanes, thus it is not reasonable to judge it is the band of full mutation and further studies are needed. These results appeared in 50%, 6 of 12 mentally retarded girls. As the result of mentally retarded boys, normal band appeared in about 222 bp in control, however in experiment group, normal band did not appear. In 43%, 7 out of 12 boys, band did not either appeared in 1198bp, which showed different patterns from that of girls.

• 대한원격탐사학회지
• /
• 제25권3호
• /
• pp.263-270
• /
• 2009

Noise band removal is a crucial step before spectral matching since the noise bands can distort the typical shape of spectral reflectance, leading to degradation on the matching results. This paper proposes a statistical noise band removal method for hyperspectral data using the correlation coefficient between two bands. The correlation coefficient measures the strength and direction of a linear relationship between two random variables. Considering each band of the hyperspectral data as a random variable, the correlation between two signal bands is high; existence of a noisy band will produce a low correlation due to ill-correlativeness and undirected ness. The unsupervised k-nearest neighbor clustering method is implemented in accordance with three well-accepted spectral matching measures, namely ED, SAM and SID in order to evaluate the validation of the proposed method. This paper also proposes a hierarchical scheme of combining those measures. Finally, a separability assessment based on the between-class and the within-class scatter matrices is followed to evaluate the applicability of the proposed noise band removal method. Also, the paper brings out a comparison for spectral matching measures. The experimental results conducted on a 228-band hyperspectral data show that while the SAM measure is rather resistant, the performance of SID measure is more sensitive to noise.