• Journal of Korea Game Society
• /
• v.9 no.3
• /
• pp.107-119
• /
• 2009

Online games belong to a technology-oriented service industry that has emerged from the assimilation of game contents and communication networks in the respective realms of culture technology (CT) and information technology (IT). This study examines the individual acceptance of online games as entertainment-oriented technology based on the belief-attitude-intention paradigm and the underlying hedonic and utilitarian motivations. To measure the latent variables influencing the acceptance process, a structured questionnaire was developed based on the existing Technology Acceptance Model. Research model analysis and hypothesis testing were carried out using a structural equation model. Results indicated that latent variables reflecting hedonic and utilitarian characteristics had a significant influence on user behavior in the acceptance of online games. By uncovering the core factors in! fluencing the acceptance of online games and thereby theoretically verifying the latent variables influencing the acceptance of entertainment-oriented technology, this study provides strategic implications for business models by game companies aimed at attracting a large user base and dominating the market.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1077-1080
• /
• 2008

Material parameters such as surface chloride content, water permeability coefficient, chloride diffusivity and critical chloride content are a substantial key parameter for understanding the durability performance of concrete and its micro-structural densification. Over the past few decades, a considerable number of studies on the durability design for marine concrete structures have been carried out. However, the results are different to each other. In order to establish a consistent durability design system of concrete, it is a precondition to define material parameters, which affect deterioration of concrete due to chloride penetration. Such parameters are surface chloride content, chloride diffusivity, and critical chloride content. Usually these parameters are assumed as temporary constant values or obtained from the experimental results for short term. However, it is necessary to define these parameters reasonably, because these significantly influence the calculation of service life of concrete. In this paper, it is introduced to define material parameters of concrete for chloride diffusion, such as surface chloride content $[Cl]_s$, water permeability coefficient K, chloride diffusivity $D_{Cl}$, critical chloride content $[Cl]_{cr}$. These are expressed as time function considering hydration evolution of hardened cement paste. The definition of the material parameters is a prerequisite to simulate chloride penetration into concrete as time elapsed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.585-588
• /
• 2008

To predict the service life of reinforced concrete structures exposed to chloride environment, quantitative measures of material properties such as the critical chloride content for corrosion in concrete and the diffusion coefficient of chloride ions of concrete and the surface chloride content of the concrete are essential. However, it should be noted that they are influenced by several factors such as concrete mix proportions, cement type, and environmental conditions, etc. Thus, the purpose of this research is to estimate more actually the critical chloride content for corrosion of the reinforcing steel in concrete by field exposure experiment. For this purpose, the prism concrete test specimens were made for water-cement(W/C) ratios of 31%, 42%, 50%, and 70%, and then the field exposure experiment for them were conducted at Youngduk of the east coast for about 3 years. During the test, corrosion monitoring by half cell potential method was carried out to detect the time to initiation of corrosion for test specimens and its chloride content was evaluated by breaking the concrete test specimens when corrosion of the reinforcing steel in concrete was perceived. It was observed from the test results that the critical chloride content for corrosion of reinforcing steel in concrete would be dependent on W/C ratio and almost irrespective of concrete cover.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.553-560
• /
• 2004

In this experiment, a three dimensional structure analysis was carried out to examine the surface defects of semiconductor made artificially on known scale. It was investigated the three dimensional imaging according to the sample depth and the thermal diffusivity as well as the carrier transport properties. The thermal diffusivity measurement of the intrinsic GaAs semiconductor was also analyzed by the difference of frequency-dependence photoacoustic signals from the sample surface of different conditions. Thermal properties such as thermal diffusion length or thermal diffusivity of the Si wafer with and without defects on the surface were obtained by interpreting the frequency dependence of the PA signals. As a result, the photoacoustic signal is found to have the dependency on the shape and depth of the defects so that their structure of the defects can be analyzed. This method demonstrates the possibility of the application to the detection of the defects, cracks, and shortage of circuits on surface or sub-surface of the semiconductors and ceramic materials as a nondestructive testing(NDT) and a nondestructive evaluation(NDE) technique.

• Solar Energy
• /
• v.17 no.4
• /
• pp.3-11
• /
• 1997

Because grain boundaries in polycrystalline silicon act as potential barriers and recombination centers for the photo-generated charge carriers, these defects degrade conversion effiency of solar cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatment, various grid pattern, selective wet etching for grain boundaries, buried contact metallization along grain boundaries, grid on metallic thin film. Pretreatment above $900^{\circ}C$ in $N_2$ atmosphere, gettering by $POCl_3$ and Al treatment for back surface field contributed to obtain a high quality poly-Si. To prevent carrier losses at the grain boundaries, we carried out surface treatment using Schimmel etchant. This etchant delineated grain boundaries of $10{\mu}m$ depth as well as surface texturing effect. A metal AI diffusion into grain boundaries on rear side reduced back surface recombination effects at grain boundaries. A combination of fine grid with finger spacing of 0.4mm and buried electrode along grain boundaries improved short circuit current density of solar cell. A ultra-thin Chromium layer of 20nm with transmittance of 80% reduced series resistance. This paper focused on the grain boundary effect for terrestrial applications of solar cells with low cost, large area, and high efficiency.

• The Korea Journal of Herbology
• /
• v.30 no.6
• /
• pp.55-61
• /
• 2015

Objectives : Yongdamgosam-hwan(YGH) has been used as a traditional medicine from old times for antiinflammatory effects. Streptococcus mutans(S. mutans) is known as a prime bacteria responsible for causing caries by forming a biofilm referred to as dental plaque on the tooth surface. But antimicrobial activity of YGH with dental disease is not sufficiently understood. This study was designed to investigate the effects of YGH ethanol extract on antimicrobial effect against Streptococcus mutans.Methods : The antimicrobial effect of YGH ethanol extract was assessed by the paper disk diffusion method and optical density method to determine minimum inhibition concentration(MIC), also observed by fractional inhibitory concentration index(FICI) and time-kill assay to figure out the synergic effect on the combination of YGH ethanol extract with antibiotics.Results : The YGH ethanol extract 500 μg was 7.5-8.5 mm diameter of clear zone of inhibition against Streptococcus mutans in a concentration-dependent manner and MIC was 250 μg/mL. The administration of the ethanol extract in combination with gentamicin and streptomycin induced a reduction of ≥4-8-fold in all tested bacteria. Furthermore, time-kill study was found that a combination of YGH ethanol extract with oxacillin and streptomycin produced a more rapid decrease in the concentration of bacteria CFU/mL than the YGH ethanol extract or antibiotics alone.Conclusions : As a result, the YGH ethanol extract has good antimicrobial effects. And the results suggest that YGH could be employed as a natural antibacterial agent in dental care products.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.10-23
• /
• 2001

In order to increase the lower values of % grafting and monomer conversion in the emulsion graft polymerization of methylmethacrylate(MMA) onto sodium alginate (SA; a polymer electrolyte) with alginic acid-g-PMMA, the graft polymerization with water soluble (methanol and acetone) and insoluble solvents was carried out using a varity of solvent amounts and agitating rates. And some physical properties of the graft polymer were also investigated. In the polymerizations with water insoluble solvent, there were pronounced improvements in both % grafting and MMA conversion by the promotion of MMA diffusion from the core to the SA adsorpted on the outer layer of particle and that of MMA complex formation with SA. And the effect was larger for the solvents (cyclohexane, decalin) which do not dissolve PMMA. On the other hand, in the polymerization with water soluble solvent, there was an significant increase in MMA conversion and a considerable increase in the % grafting by the destruction of electrical double layer around the SA chains, abstracting the hydrated water in the layer and the effect was more potential in the case of methanol which is a precipitant of PMMA.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.141-149
• /
• 2020

The Korea Industrial Standards (KS) stipulates methods and test procedures for measuring the horizontal combustibility of cellular plastics exposed to small flames (KS M ISO 9772:2018) and recommendations regarding the magnetic digestion of extruded polystyrene insulation (XPS) for measurement results (KS M 3808:2020). Although products that are certified to conform to KS standards must have burning characteristics (self-extinguishing), they are incinerated and spread by welds at construction sites, causing significant human and property damages. In this study, XPS produced by five companies, certified by KS, and sold in the market were purchased and tested for ignition and diffusion caused by a weld bullion at a construction site. The results showed that the five products had differences in performance. Three out of the five products were found to be self-saturated, but the other two were easily ignited and diffused, making it difficult for them to be self-extinguishing. Based on the result of this experimental investigation in line with the KS regulations, all the three types of products, including two types of products that were incinerated through weld defects, were found to be non-self-extinguishing, as specified in KS M 3808.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.414-420
• /
• 2007

Nanomaterials have been applied to various fields due to their advantageous characteristics such as high surface area, rapid diffusion, high specific surface areas, reactivity in liquid or gas phase, and a size close to biomacromolecules. Up to date, increased manufacturing and frequently use of the materials, however, revoke people's concerns on their hazard impact including toxicity the materials. Many research groups have carried out different protocols to evaluate toxic effects of nanomaterilas on different organisms, and consequently, nanomaterials are known to cytotoxicity. In this paper, we reviewed some of the most reports on toxic effects of several nanoparticles specifically on bacteria. There are numbers of reports focused on antibacterial effect of nanoparticles based on bacterial cell viability. Therefore, the application of each nanomaterial should be concerned with its toxicity and its toxic effect should be evaluated in terms of concentrations and sizes of the nanomaterials used, prior to use of a nanomaterial.

• Microbiology and Biotechnology Letters
• /
• v.43 no.4
• /
• pp.396-400
• /
• 2015

Enterobacteriaceae is one of the major families responsible for public health threats. Due to the emergence of pathogens with antibiotic resistance, great concern has been raised regarding the prevalence of antibiotic resistant bacteria in natural environments. Therefore, the diversity of Gram negative Enterobacteriaceae was investigated in water samples collected from five streams in Korea using the cultivation method. Profiling of multi-drug resistance was conducted with isolates via disk diffusion assay. The results indicated that the Gram negative Enterobacteriaceae consisted of the following genus; Citrobacter, Enterobacter, Escherichia, Klebsiella, Kluyvera, Pantoea, Plesiomonas, Raoultella, Shigella and Enterobacter. These latter strains represented 49% of identified isolates. In addition, 78.3% of the identified genus exhibited resistance against more than seven out of thirteen tested antibiotics, suggesting a high prevalence of multi-drug resistant bacteria in natural environments.