• Clean Technology
• /
• v.25 no.2
• /
• pp.168-176
• /
• 2019

Spent coffee is one of biomass sources to be converted into bio-oil. However, the bio-oil should be further upgraded to achieve a higher quality bio-oil because of its high oxygen content. Deoxygenation under hydrotreating using different catalysts (catalytic hydrodeoxygenation; HDO) is considered as one of the promising methods for upgrading bio-oil from pyrolysis by removal of O-containing groups. In this study, the HDO of spent coffee bio-oil, which was collected from fast pyrolysis of spent coffee ($460^{\circ}C$, $2.0{\times}U_{mf}$), was carried out in an autoclave. The product yields were 72.16 ~ 96.76 wt% of bio-oil, 0 ~ 18.59 wt% of char, and 3.24 ~ 9.25 wt% of gas obtained in 30 min at temperatures between $250^{\circ}C$ and $350^{\circ}C$ and pressure in the range of 3 to 9 bar. The highest yield of bio-oil of 97.13% was achieved at $250^{\circ}C$ and 3 bar, with high selectivity of D-Allose. The carbon number distribution of the bio-oil was analyzed based on the concept of simulated distillation. The $C_{12}{\sim}C_{14}$ fraction increased from 22.98 wt% to 27.30 wt%, whereas the $C_{19}{\sim}C_{26}$ fraction decreased from 24.74 wt% to 17.18 wt% with increasing reaction time. Bio-oil yields were slightly decreased when the HZSM-5 catalyst and dolomite were used. The selectivity of CO was increased at the HZSM-5 catalyst and decreased at the dolomite.

• Journal of the Korean Ceramic Society
• /
• v.11 no.2
• /
• pp.22-30
• /
• 1974

This study was carried out to investigate the species of iron compounds in kaolin mineral and the bonding relation between the major kaolin and its subordinate iron compound existing as incidental mineral in common clay by means of chemical composition, X-ray diffraction, thermal differential and thermogravimetrie analysis for the application of clays in the field of ceramic raw material. The domestic clay are produced abounduntly in many places, but San-Cheong kaolin, Chu-An clay, and Yeong-Am clay were selected as samples in this experiment because of their frequent utilization in porcelain industry. Two kinds of samples with low and high iron content are picked up respectively from the place of production and elutriated under two micron size to determine the properties and concentration of iron compound very fine particles or colloidal substance of low crystalline grade. Therefore, hydrothermal treatment in autoclave was conducted considering the existence of low crystalline grade of iron compounds known as an amorphoue state in X-ray diffraction pattern furthermore, de-iron treatment of hydrothermal compound was done in order to identify the related iron compound before and after hydrothermal reaction and iron compound which is one of the samples was synthesized for the determination of their compounds state in more detail. The obtained results in this study are as follows: In San-Cheong kaolin, Chu-An clay and Yeong-Am clay 1) It is proved that species accompanying iron compound is $\alpha$-FeOOH form. 2) Iron compound is composed of very fine particles or colloidal substance. 3) The iron substance encircles the fine parts of clay minerals under 2 micron and acts as cementizing agent.

• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.127-134
• /
• 2008

This study was carried out to investigate the changes of ginsenosides composition in Korean red ginseng water extract (RGWE) after heated with high temperatures above $100^{\circ}C$. RGWEs were adjusted with pH 3.0, pH 7.0 and pH 10.0, respectively, and then heated at 100,110 and $120^{\circ}C$ for 30 minutes by using autoclave. Total ginsenosides of RGWE treated with heating showed decreasing tendency when compared with control. By TLC analysis, decreasing effect of ginsenosides in RGWE were significantly observed in the acidic condition of pH 3.0, particulary. By HPLC analysis, total ginsenoside of control showed 1.89%, while those of RGWE treated with 100, 110 and $120^{\circ}C$ showed 1.22, 1.05 and 0.97%, respectively. The ratio of protopanaxadiol (PD) to protopanaxatriol (Pr) saponins in control was 1.89, while that of PD/PT in treated RGWEs were level of 1.33 to 1.47. By the result of decreased ratio of PD/PT in RGWE, it was considered that PD type saponin such as ginsenoside$-Rb_{1}$, $-Rb_{1}$, -Rc and -Rd was more unstable than PT type saponin such as ginsenoside-Re and Rg against high temperature heating above $100^{\circ}C$.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.1
• /
• pp.94-103
• /
• 2016

Landfarming that supplies aerobic biodegradation condition to indigenous microbes in soils is a biological remediation technology. In this research, volatilization and biodegradation rate by indigenous microbes in the soil contaminated with total petroleum hydrocarbons (TPH) were measured. Soils were contaminated with diesel artificially and divided into two parts. One was sterilized by autoclave to remove indigenous microorganism and the other was used as it was. Various moisture contents and number of tillings were applied to the soil to find out proper condition to minimize volatilization and enhance bioremediation. Volatilization of TPH was inhibited and biodegradation was enhanced by increase on moisture content. Tilling was usually used to supply air for microbes, but tillings did not affect the growth of microbes in our study. Enough moisture content and proper aeration are important to control volatilization in landfarming. Also, TPH degradation was a function of the microbe counts (x₁), numbers of tilling (x₂), and moisture content (x₃) from the application of the response surface methodology. Statistical results showed the order of significance of the independent variables to be microbe counts > numbers of tilling > moisture content.

• Culinary science and hospitality research
• /
• v.13 no.1 s.32
• /
• pp.55-61
• /
• 2007

This study was carried out to evaluate the growth characteristics of Lactobacillus acidophilus KCCM 32820 and Propionibacterium freudenreichii KCCM 31227 and the production of propionic and acetic acids in 5% and 10% whey broth by mixed culture of L. acidophilus KCCM 32820 and P. freudenreichii KCCM 31227. Exponential phase of L. acidophilus KCCM 32820 was in the range of $6\sim12$ hrs and P. freudenreichii KCCM 31227 was in the range of $36\sim108$ hrs. In the mixed culture, production of propionic acid was shown to be greater value in the 10% whey broth than in the 5% whey broth and to be greater value in the low temperature for a long time than in sterilization by autoclave. Maximum production of propionic acid was 8.88 mg/mL in the 10% whey broth fermented at 120hrs. Production of acetic acid was revealed to be greater value in the 10% whey broth than in the 5% whey broth. The production quantity ratio of propionic acid to acetic acid was shown between $2:1\sim3:1$ during the fermentation process.

• Journal of Mushroom
• /
• v.9 no.2
• /
• pp.74-79
• /
• 2011

This study was carried out to develop a method related to measuring the temperature of sterile medium in bottle cultivation. When the medium is sterilized, the device is able to be inserted inside of the medium and the temperature can be directly measured in real time although high temperature and pressure are detected in the sterilization. This device can be able to measure the sterilization temperature in short intervals inside of autoclave and medium used in bottle cultivation. As the method were applied to the field cultivation of mushroom, we could produce mushroom in consistent manner through the optimum sterilization of the medium.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.867-872
• /
• 2010

Unused energy derived from sources in nature can be captured and stored for future use, for example, to recharge a battery or power a device; this process of capturing and storing energy is called energy harvesting. Extensive investigations are being carried out in order to use piezoelectricity to harvest the energy generated by body movements or machine vibrations. This paper presents a simple analytical model that describes the output voltage effectiveness of a Piezocomposite Generating Element (PCGE) from vibration and its experimental verification. PCGE is composed of carbon/epoxy, PZT, and glass/epoxy layers. During the manufacturing process, the stacked layers were cured at $177^{\circ}C$ in an autoclave, which created residual stresses in PCGE and altered the piezoelectric properties of the PZT layer. In the experiments, three kinds of lay-up configurations of PCGE were considered to verify the proposed prediction model and to investigate its capability to convert oscillatory mechanical energy into electrical energy. The predicted performance results are in good agreement with observed experimental ones.

• Composites Research
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2018

The RFI process can be applied to very thick structures without limiting the resin viscosity. When the proper thickness of the resin film cannot be set, the resin film creates either the non-impregnated section or the excessive resin contents and this leads to the deterioration of mechanical properties. Therefore, this study proposed a method for setting the resin film thickness in the RFI process. The fiber compaction behavior test was proposed by setting the proper resin film thickness and the properties of composites were evaluated through short beam shear strength test, compression test and porosity measurement to verify the proposed method. The evaluation of physical properties of composites was conducted and an appropriate level of resin film thickness was found based on the results of fiber compaction behavior test.

• Composites Research
• /
• v.36 no.5
• /
• pp.321-328
• /
• 2023

This study developed the in-situ stamp-forming process using the multi-axis robotic arm to fabricate thermal composite parts. Optimal fabrication parameters with the multi-axis robotic arm were determined using finite element analysis and these parameters were further refined through the practical manufacturing process. A comparison between the manufactured parts and finite element analysis results was conducted regarding thickness uniformity and wrinkle distribution to confirm the validity of the finite element analysis. Additionally, to evaluate the formability of the manufactured composite parts, measurements of crystallinity and porosity were taken. Consequently, this study establishes the feasibility of the In-situ stamp-forming consolidation using a robotic arm and verifies the potential for producing composite parts through this process.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.223-233
• /
• 1998

The kinetic and mechanism of the hydrothermal reaction between lime and quartz used solid state reaction equations have been investigated. Hydrothermal reaction on the starting materials was carried out in an autoclave that quartz mixed with calcium hydroxide in CaO/$SiO_2$ ratio of 0.8-1.0 for 0.5-8 hour at saturated steam pressure of $180-200^{\circ}C$. The rate of reaction was given from the ratio of uncombined lime and quartz content to the total lime and quartz content. The rate of reaction was obtained the results by the Jander's equation $[1-(1-\alpha)^{1/3}]^N=Kt$. The reaction of lime is controlled mainly by the dissolution such as N=1, and the reaction of quartz is controlled mostly by the diffusion such as $N\risingdotseq2$. The rate of hydrothermal reaction in the calcium silicate hydrates system is suggested to be determined generally by the mass transfer through the product laver formed around the reactant particles. The rate equation for whole hydrothermal reaction is shown that it is converted into the rate determining step by the diffusion from the boundary reaction such as approximately $N=1-2$.