• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1184-1186
• /
• 2003

In this paper, a charge controlled asymmetrical half-bridge (ASHB) dc-to-dc converter is presented. For ASHB do-to-dc converter, the peak current-mode control was found to be problematic primarily due to the oscillatory behavior of the current feedback signal. To resolve this problem, a charge control method is applied to the ASHB do-to-dc converter. A 50W prototype ASHB dc-to-dc converter was built, and successfully tested.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.101-106
• /
• 2006

• Nuclear Engineering and Technology
• /
• v.44 no.3
• /
• pp.283-296
• /
• 2012

The natural convection in a horizontal enclosure heated from the bottom wall, cooled at the top wall, and having a square adiabatic body in the center is studied. Three different Prandtl numbers (0.01, 0.7 and 7) are considered for the investigation of the effect of the Prandtl number on natural convection. Adiabatic boundary conditions are employed for the side walls. A two-dimensional solution for unsteady natural convection is obtained, using an accurate and efficient Chebyshev spectral methodology for different Rayleigh numbers varying over the range of $10_3$ to $10_6$. It had been experimentally reported that the heat transfer mode becomes oscillatory when Pr is out of a specific Pr band beyond the critical Ra. In this study, we reproduced this phenomenon numerically. It was found that when Ra=$10_6$, only the case for intermediate Pr (=0.7) reached a non-changing steady state and the low and high Pr number cases (Pr=0.01 and 7) showed a periodically oscillatory fashion hydrodynamically and thermally. The variation of time- and surface-averaged Nusselt numbers on the hot and cold walls for different Rayleigh numbers and Prandtl numbers are presented to show the overall heat transfer characteristics in the system. Further, the isotherms and streamline distributions are presented in detail to compare the physics related to their thermal behavior.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1525-1530
• /
• 2006

A simple oscillating reaction model subject to additive Gaussian white noise is investigated as the model is located in the dynamic region of oscillations. The model is composed of three ordinary differential equations representing the time evolutions of X, Y, and Z, respectively. Initially, a uniform random noise is separately added to the three equations to study the effect of noise on the oscillatory cycle of X, Y, and Z. For a given value of noise intensity, the amplitude of oscillation increases monotonically with time. Furthermore, the noise is added to any one of the three equations to study the impact of noise on one species on the bifurcation behavior of the other.

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.28-35
• /
• 2012

Purpose: This study performed the oscillatory test using the texture analyzer to characterize the viscoelastic behavior of apples such as the storage modulus (E'), the loss modulus (E"), the complex modulus (${\mid}E^*{\mid}$) and the energy dissipated per cycle ($W_{diss}$). Methods: The sinusoidal deformation with the frequency of 1-10 Hz and the maximum displacement of 0.1 mm were applied to the flesh tissues of Fuji, Golden Delicious and Red Delicious apples. The Lissajous figure was used to measure the phase angle(${\delta}$) between stress and strain curve. Results: Trigger force was critical to the measurement of the phase angle. E', E", ${\mid}E^*{\mid}$ and Wdiss were measured using the Lissajous figure and the phase angle. The complex modulus of Golden Delicious apple was significantly lower than those of Fuji apple and Red Delicious apple. Conclusions: Apple flesh was exhibiting more elasticity at low frequency, and more viscosity at high frequency. Dynamic compressive properties of Fuji apple were similar to those of Red Delicious apple but significantly different from those of Golden Delicious apple.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.239-250
• /
• 1998

Traditionally, intake noise from internal combustion engine has not recevied much attention compared to exhaust noise. But nowadays, intake noise is a major contributing factor to automotive passenger compartment noise levels. The main objective of this paper is to identify the mechanism of generation, propagation and radiation of the intake noise. With a simplest geometric model, one of the main noise sources for the intake stroke is found to be the pressure surge, which is generated after intake valve closing. The pressure surge, which has the nonlinear acoustic behavior, propagates and radiates with relatively large amplitude. In this paper, unsteady compressible Navier-Stokes equations are employed for the intake stroke of axisymmetric model having a single moving cylinder and a single moving intake valve. To simulate the periodic motion of the piston and the valve, unsteady deforming mesh algorithm is employed and Thompson's non-reflecting boundary condition is applied to the radiation field. In order to resolve the small amplitude waves at the radiation field, essentially non-oscillatory(ENO) schemes with an artificial compression method (ACM) are used.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.585-590
• /
• 2001

The hemodynamic characteristics were compared using commercial CFD code for the stenosed coronary and abdominal arteries. Numerical calculations were carried out in the axisymmetric arteries over the stenotic diameter ratios ranging from 0.25 to 0.875 (6 cases) employing the typical physiological flow conditions. In case of the coronary artery, there was only one recirculation zone observed distal to the stenosis throat during the major portion of the period. However, in case of the abdominal aorta, there were complex recirculation regions found proximal and distal to stenosis throat. For both models, the wall shear stresses(WSS) increased sharply in the converging stenosis, reaching a peak just upstream of the throat, and became negative or low values in the post-stenotic recirculation region. As the results, the oscillatory shear index(OSI) was abruptly increased at the stenosis throat. For the coronary stenosis model, the second peak in the OSI was observed distal to the stenosis. The distance between the first peak and the second peak was increased as the degree of the stenosis was raised. On the orther hand, the abdominal stenosis model showed a complex oscillatory behavior in the OSI index and did not showed such a strong second peak. As the degree of stenosis was increased, recirculation regions of the both arteries were extended much longer and flow pattern became more complex.

• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.610-614
• /
• 2007

Dynamic rheological properties of honeys with invert sugar at different mixing ratios of honey and invert sugar (10/0, 812, and 6/4 ratios) were evaluated at various low temperatures (-15, -10, -5, and $0^{\circ}C$) using a controlled stress rheometer for small-deformation oscillatory measurements. Honey-invert sugar mixtures displayed a liquid-like behavior, with loss modulus (G") predominating over storage modulus (G') (G">>G'), showing the high dependence on frequency (${\omega}$). The magnitudes of G' and G" increased with a decrease in temperature while their predominant increases were noticed at -10 and $-15^{\circ}C$. The greater tan ${\delta}$ values were found at higher temperature and ratio of honey to invert sugar, indicating that the honey samples at subzero temperatures become more viscous with increased ratio of honey to invert sugar and temperature. The time-temperature superposition (TTS) principle was used to bring G" values at various temperatures together into a single master curve. The TTS principle was suitable for the honey samples in the liquid-like state. The progress of viscous property (G") was also described well by the Arrhenius equation with high determination coefficients ($R^2=0.99$). Dynamic rheological properties of honey samples seem to be greatly influenced by the addition of invert sugar.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.259-266
• /
• 2003

Load reduction ring (LRR) was installed on the ABB-Atom sparger to reduce the oscillatory loadings due to the air bubble clouds in the water pool in case of safety relief system operations. In order to investigate the effect of LRR on the pressure field, a numerical simulation on the behavior of air bubble clouds discharging into a water pool through a ABB-Atom sparser without LRR was performed by using a commercial thermal hydraulic analysis code, FLUENT 4.5. Among the multi-phase models contained in the code, the VOF (Volume Of Fluid) model was used to simulate the interface of water, air and steam flows. By comparing the analysis results with the previous ones, the load reduction ring has an effect on reducing the oscillatory loads at the wall. It also includes the effect of air mass and inlet boundary conditions of the pipe on the pressure oscillations at the wall.

• Journal of the Korean Vacuum Society
• /
• v.21 no.5
• /
• pp.249-257
• /
• 2012

Nonlinear dynamical behaviors of plasma in the Pierce diode are investigated by a numerical code developed using a one dimensional fluid model. The plasma in Pierce diode is alternately stable and unstable as Pierce parameter is changed. The dynamical characteristics of neutral and non-neutral Pierce system is examined analytically and numerically. It alternately has growing and oscillatory mode as Pierce parameter varies. As Pierce parameter is decreased, each oscillatory mode undergoes a sequence of subharmonic period-doubling bifurcation and then culminate in a chaotic strange attractor. The analysis for this nonlinear behavior can be used as a model for understanding of beam-plasma interaction in more complex geometries and a data for chaos control.