• The Plant Pathology Journal
• /
• 제33권5호
• /
• pp.441-449
• /
• 2017

Citrus canker is an important bacterial disease of citrus in several regions of the world. Strains of Xanthomonas citri type-A (Xc-A) group are the primary pathogen where citrus canker occurs. After Xc-A entered the Northeast of Argentina in 1974, the disease spread rapidly from 1977 to 1980 and then slowed down and remained moving at slow pace until 1990 when it became endemic. Citrus canker was detected in Northwest Argentina in 2002. This paper presents the main steps in the fight of the disease and the management strategies that have been used to control citrus canker at this time. We think the process might be usefull to other countries with the same situation. Results from more than 40 years of research in Northeast (NE) Argentina indicate that we are at the limit of favorable environment for the disease. The severity of citrus canker is greatly affected by the environment and El $Ni{\tilde{n}}o$ Southern Oscillation (ENSO) phenomenon which causes cyclic fluctuations on the disease intensity in the NE region. Weather-based logistic regression models adjusted to quantify disease levels in field conditions showed that the environmental effect was strongly modulated by the distance from a windbreak. Production of healthy fruits in citrus canker endemic areas is possible knowing the dynamics of the disease. A voluntary Integrated Plan to Reduce the Risk of Canker has been in place since 1994 and it allows growers to export unsymptomatic, uninfested fresh fruit to countries which are free of the disease and require healthy, pathogen free fruits. The experience from Argentina can be replicated in other countries after appropriate trials.

• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.426-437
• /
• 2007

초음속 흡입구는 설계점에서 안정된 작동을 보이지만 탈설계점에서는 흔히 버즈라고 불리는 공력 불안정성에 직면하게 되고, 결과적으로 현저한 엔진 성능의 저하를 초래하게 된다. 버즈의 일반적인 특성을 파악하기 위해 1단 꺽임각을 갖는 외부 압축식 축대칭 흡입구를 이용하여 실험적, 수치적 연구를 수행하였다. 본 연구를 통해, 흡입구 목에서 박리에 의한 흡입구 질식이 버즈의 주요 원인임을 밝힘으로써 버즈 현상의 메커니즘을 파악하였다. 여러 면적비율에 따라 간헐적 버즈와 연속적 버즈가 관찰되었고 그 천이과정이 파악되었다. 면적비율이 감소할수록 버즈 주파수가 증가하였으나, 각 면적비율에서 흡입구 내 모든 위치의 압력 진동 주파수는 동일한 특성을 갖는다.

• 세라미스트
• /
• 제22권3호
• /
• pp.281-300
• /
• 2019

Surface enhanced Raman scattering (SERS) was first discovered in 1974 by an unexpected Raman signal increase from Pyridine adsorbed on rough Ag electrode surfaces by the M. Fleishmann group. M. Moskovits group suggested that this phenomenon could be caused by surface plasmon resonance (SPR), which is a collective oscillation of free electrons at the surface of metal nanostructures by an external light source. After about 40 years, the SERS study has attracted great attention as a biomolecule analysis technology, and more than 2500 new papers and 500 review papers related to SERS topic have been published each year in recently. The advantages of biomaterials analysis using SERS are as follows; ① Molecular level analysis is possible based on unique fingerprint information of biomolecule, ② There is no photo-bleaching effect of the Raman reporters, allowing long-term monitoring of biomaterials compared to fluorescence microscopy, ③ SERS peak bandwidth is approximately 10 to 100 times narrower than fluorescence emission from organic phosphor or quantum dot, resulting in higher analysis accuracy, ④ Single excitation wavelength allows analysis of various biomaterials, ⑤ By utilizing near-infrared (NIR) SERS-activated nanostructures and NIR excitation lasers, auto-fluorescence noise in the visible wavelength range can be avoided from in vivo experiment and light damage in living cells can be minimized compared to visible lasers, ⑥ The weak Raman signal of the water molecule makes it easy to analyze biomaterials in aqueous solutions. For this reason, SERS is attracting attention as a next-generation non-invasive medical diagnostic device as well as substance analysis. In this review, the principles of SERS and various biomaterial analysis principles using SERS analysis will be introduced through recent research papers.

• 대한토목학회논문집
• /
• 제13권3호
• /
• pp.129-138
• /
• 1993

본 연구는 Navier-Stokes 식의 모형방정식으로 이류 및 확산거동을 갖는 선형화된 Burgers 방정식과 비선형 형태의 Burgers 방정식을 선택하여, 이에 대한 유한차분법과 유한해석법의 수치해를 해석해와 비교하여 봄으로써, 유한해석법의 응용성에 대해 고찰한 것이다. 본 연구를 통하여 얻어진 성과를 요약하면 다음과 같다. Burgers 방정식 및 선형화된 Burgers 방정식의 정상상태의 해석해를 사용하여 두 수치기법에 따른 수치해를 비교해 본 결과, 해석해와의 근사정도를 동일 기준 하에서 살펴볼 때, 유한해석법이 유한차분법보다 우수한 것으로 나타났다. Burgers 방정식의 비정상상태의 해석해에 대한 정확성 또한 유한해석법이 보다 잘 일치하는 것으로 나타났다. 특히 유한해석법은 유한차분법의 사용시 격자 크기의 선택에 따라 해의 수렴과정에서 발생할 수 있는 위상오차에 기인한 진동현상이 전혀 발생하지 않는다는 것을 확인할 수 있었으며, 따라서 유한해석법은 수치기법상 위상오차로부터 자유로운 안정된 해석기법이라고 판단된다.

• 한국해양학회지
• /
• 제21권4호
• /
• pp.245-258
• /
• 1986

入射長波에 의해 발생하는 강제 副振動 現象을 밝히기 위한 2次元 數値모델을 개발하여 우리나라주요 港灣中 副振動이 가장 빈번히 觀測되는 迎日 과 浦港新項 에 적용하였다. 本 硏究의 結果는 다음과 같다. 1. 數値모델에 의해 구한 硏究 海灣 의 固有週期는 迎日 의 경우 제1固有週期는 약 70분이고, 第2固有週期는 약 25분 이며 浦港新項의 경우 第1固有週期는 약 25분이고, 제 2고유주기는 약 7.5분이다. 이는 理論式 Spectrum 분석, 統計調査에 의해 구한 週期와도 잘 일치함이 確認되었 다. 2. 迎日 第2固有週期와 浦港新項의 第1固有週期는 거의 같다. 그러므로 迎日 내로 25분주기의 長波가 들어올 때 浦港新項내의 海面 副振動은 강하게 增幅될 수 있다.

• 한국지진공학회논문집
• /
• 제9권2호통권42호
• /
• pp.71-80
• /
• 2005

유체자유수면의 동적거동을 합리적으로 예측하기 위해서는 비선형 특성을 보이는 자유수면의 동역학적 경계조건을 고려해야할 뿐만 아니라 시간에 따라 변화하는 자유수면의 위치변화에 따른 운동학적 경계조건을 고려하여야 한다. 이러한 문제는 대상구조물이 3차원이 될 경우 더욱 복잡해지므로 3차원 비선형 유체자유수면의 해석은 이론해의 도출이 어려우며 수치해석 방법을 이용하는 것이 효과적이다. 본 연구에서는 수치해석 안정성이 높고 3차원 문제에서도 하나의 변수로 유체거동을 모사할 수 있는 arbitrary Lagrangian-Eulerian approach 를 경계요소에 적용하여 효율적이며 안정적인 유체 대변형 해석기법을 개발하였다. 개발된 기법은 향후 자유수면의 비선형 효과를 고려한 유체-구조물 상호작용 해석에 효과적으로 적용할 수 있을 것으로 판단된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.330-343
• /
• 2016

This paper presents results of an experimental investigation of vortex-induced vibration (VIV) of a flexibly mounted and rigid cylinder with two-degrees-of-freedom with respect to varying ratio of in-line natural frequency to cross-flow natural frequency, $f^*$, at a fixed low mass ratio. Combined in-line and cross-flow motion was observed in a sub-critical Reynolds number range. Three-dimensional displacement meter and tension meter were used to measure dynamic responses of the model. To validate the results and the experiment system, x and y response amplitudes and ratio of oscillation frequency to cross-flow natural frequency were compared with other experimental results. It has been found that the higher harmonics, such as third and more vibration components, can occur on a certain part of steel catenary riser under a condition of dual resonance mode. In the present work, however, due to the limitation of a size of circulating water channel, the whole test of a whole configuration of the riser at an adequate scale for VIV phenomenon was not able to be conducted. Instead, we have modeled a rigid cylinder and assumed that the cylinder is a part of steel catenary riser where the higher harmonic motions could occur. Through the experiment, we have found that even though the cylinder was assumed to be rigid, the occurrence of the higher harmonic motions was observed in a small reduced velocity ($V_r$) range, where the influence of the in-line response is relatively large. The transition of the vortex shedding mode from one to another was examined by using time history of x and y directional displacement over all experimental cases. We also observed the influence of in-line restoring force power spectral density with $f^*$.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.338-353
• /
• 2016

Information on the surge behaviors and stall stagnation boundaries for a nine-stage axial flow compressor are summarized on the basis of analytical data in comparison with those for a single-stage one, with attention to the pressure ratio effect. The general trends of the surge loop behaviors of the pressure-mass flow are similar for both compressors including the fact that the subharmonic surges tend to appear very near the stall stagnation boundaries. With respect to the nine-stage compressor, however, the mild loops in the subharmonic surges tend to be very small in size relative to the deep loops, and at the same time, insufficient surge recovery phenomenon, which is a kind of subharmonic surge, appears also far from the stagnation boundary for relatively short delivery flow-paths. The latter is found to be a rear-stage surge caused by unstalling and re-stalling of the rear stages with the front-stages kept in stall in the stalled condition of the whole compressor, which situation is caused by stage-wise mismatching in the bottom pressure levels of the in-stall multi-stage compressor. The fundamental information on the stall stagnation boundaries is given by a group of normalized geometrical parameters including relative delivery flow-path length, relative suction flow-path length, and sectional area-pressure ratio, and by another group of normalized frequency parameters including relative surge frequencies, modified reduced resonance frequencies, and modified reduced surge frequencies. Respective groups of the normalized parameters show very similar tendency of behaviors for the nine-stage compressor and the single-stage compressor. The modified reduced resonance frequency could be the more reasonable parameter suggesting the flow-induced oscillation nature of the surge phenomena. It could give the stall stagnation boundary in a more unified manner than the Greitzer's B parameter.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3635-3642
• /
• 2021

Natural circulation systems (NCSs) are extensively applied in nuclear power plants because of their simplicity and inherent safety features. For some passive natural circulation systems in floating nuclear power plants (FNPPs), the ocean is commonly used as the heat sink. Condensation induced water hammer (CIWH) events may appear as the steam directly contacts the subcooled seawater, which seriously threatens the safe operation and integrity of the NCSs. Nevertheless, the research on the formation mechanisms of CIWH is insufficient, especially in NCSs. In this paper, the characteristics of flow rate and fluid temperature are emphatically analyzed. Then the formation types of CIWH are identified by visualization method. The experimental results reveal that due to the different size and formation periods of steam slugs, the flow rate presents continuous and irregular oscillation. The fluid in the horizontal hot pipe section near the water tank is always subcooled due to the reverse flow phenomenon. Moreover, the transition from stratified flow to slug flow can cause CIWH and enhance flow instability. Three types of formation mechanisms of CIWH, including the Kelvin-Helmholtz instability, the interaction of solitary wave and interface wave, and the pressure wave induced by CIWH, are obtained by identifying 67 CIWH events.

• 디지털융복합연구
• /
• 제19권11호
• /
• pp.341-349
• /
• 2021

최근 조명 산업이 중요한 분야로 인식되면서 PQR (Photonic Quantum Ring) 소자는 LED(Light Emitting Diode)를 대체할 수 있는 차세대 광원이 될 전망이다. 본 연구에서는 기존 연구와 유사한 결과를 검증하고, 소자의 광특성을 분석하기 위해 광섬유가 연결된 스테이지에 x, y, z 좌표를 입력하면 자동으로 이동하며, 또한, 소자에 광섬유를 근접시키는 NSOM (Near field scanning optical microscopy) 장치를 추가한 측정 시스템을 이용하여 소자의 광특성 실험과 공진 및 어레이 소자의 광특성 시뮬레이션을 통해 조명용 소자로 가능성을 검증하고자 하였다. 이를 위해 메사와 홀 형태가 동시에 존재하는 메사 직경 40㎛, 홀 직경 3㎛의 소자를 제작하여 소자의 근접장으로 PQR 소자는 ㎂에서 동작하며, 메사와 홀 소자는 서로 독립적으로 구동됨을 관찰하였다. 위치에 따른 소자의 광파장 스펙트럼을 측정하여 메사와 홀 소자에 의한 커플링 현상을 처음으로 확인하였다.