• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.177-184
• /
• 2004

Orthotropic steel deck bridge has much advantages such as the light deadweight, so the construction of orthotropic steel deck is profitable for the long-span bridges Although the system has a lot of merits, it happens some damages by the traffic density and the fatigue cracks of welding. The cross-connection of longitudinal rib and transversal rib is one of the weakest at the fatigue. The secondary stresses which are from the out-plane deformation of transversal rib and the torsion of longitudinal rib make the topical stress concentration phenomenon. The Bulkhead Plate for prevention of this stress concentration phenomenon was applied by changing the orthotropic steel deck of Williamsburg bridge in USA. But, it is principle that a Bulkhead Plate is not established in the domestic design standard. Therefore, it is estimated that the study for installation of Bulkhead Plate is needed. This study with considering these circumstances proves efficiency of Bulkhead Plate and will be presented optimal design details through finite element analysis according to change the geometrical of Bulkhead Plate and the cross-connection area of longitudinal and transversal rib

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.333-339
• /
• 2003

Recently, the bridges become greater according to development of a construction technology. This phenomenon requires long span bridge, so that increases the dead weight. The orthotropic steel deck bridges have much advantages such as the light dead weight and the reduction of construction period. And almost whole process of carried out is manufactured at factory, so it can cause the increase of quality authoritativeness. But orthotropic steel deck bridge is consist of structure by welding, it can not avoid a lot of welding jobs, defects and transformation by welding are becoming problem accordingly. Specially, topical stress concentration phenomenon in cross connection area of longitudinal and transverse rib causes fatigue failure. The Bulkhead Plate for prevention of this stress concentration phenomenon was applied by changing the orthotropic steel deck of Williamsburg bridge in USA. But, it is principle that a Bulkhead Plate is not established in the domestic design standard. Therefore, it is estimated that the study for installation of Bulkhead Plate is needed. This treatise with considering these circumstances proves efficiency of Bulkhead Plate and will be presented optimal design details through finite element analysis according to change the geometrical of Bulkhead Plate and tile cross-connection area of longitudinal and transverse rib.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.38-44
• /
• 2012

In this paper, the bending characteristics of the corrugated plates is analyzed. The trapezoidally, triangularlly and sinusoidally corrugated plates are considered. The corrugated plate is treated as an orthotropic plate that has different flexural properties in two perpendicular directions. The equivalent bending and twisting rigidities for the equivalent orthotropic plates are derived. The equivalent flexural rigidities are estimated under the following postulations: (1) The angle of continuously corrugated plate is not changed after the deformation. (2) When the pure bending moment is applied in corrugated direction of the plate, the its plane is in pure bending. Several numerical examples are analyzed with the proposed method and compared with published results.

• Composites Research
• /
• 제17권2호
• /
• pp.9-14
• /
• 2004

본 연구는 FRP 보강 콘크리트 슬래브의 휨거동에 관한 이론적 연구로서 FRP 보강 콘크리트 슬래브를 구조적 직교이방성판으로 간주하고 고전적 직교이방성판이론에 따른 휨해석 및 유한요소해석을 수행하였다. FRP 보강 콘크리트 슬래브를 직교이방성판으로 모델링하기 위해서는 각 하중한대별로 실제 구조물의 거동에 부합하는 직교이방성판의 휨강성을 결정하는 것이 중요하다. 본 연구에서는 탄성등가법을 적용하여 FRP 보강 콘크리트 슬래브와 등가인 직교이방성판의 휨강성을 결정하였으며, 탄성등가법에 의해 결정된 휨강성을 사용하여 유한요소해석 수행을 위한 강성행렬의 결정방법을 제안하였다. 또한, 이론식에 의한 해석결과와 제안된 강성행렬을 사용하여 해석한 유한요소해석 결과를 실험결과와 비교하였다.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.22-27
• /
• 2004

An orthotropic steel deck system is widely adapted form for a long-span bridge. It has many advantages, such as the big reduction of dead weight, the simplicity for erection, and the reduction of the construction period. However, an orthotropic steel deck system requires a lot of welding work, which may result in defects and deformation of connection. Therefore, the research for the general behavior and fatigue strength of the several details in orthotropic steel deck bridge is necessary. The fatigue failure with distortion results from secondary stress by out-of-plane deformation; these kinds of cracks are very difficult to measure, and can not be precisely calculated through finite element analysis. This stress concentration phenomenon generates the fatigue failure around the lower scallop of the transverse rib. This paper presents improved details of the intersection between the longitudinal rib and the transverse rib of an orthotropic steel deck bridge by the third dimensional hit size test, and the finite element method, which can minimize local stress through parametric study.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.392-401
• /
• 2002

The results of analysis of simply supported reinforced concrete slab by special orthotropic plate theory have been reported. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis of such a plate by means of the beam theory with unit width is reported. By using the "correction factor", the accurate solution for the plate can be obtained by the beam theory. The plate aspect ratio considered is from 1 : 1 to 1 ：6

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.701-710
• /
• 2002

본 연구에서는 개단면 리브를 갖는 보강판이 직교이방성 특성을 고려한 직교이방성 판 요소 프로그램을 개발하고, 여러가지 보강판에 대한 민감도 분석 및 매개변수 연구를 통하여 보강판의 직교이방성 거동 특성 및 본 프로그램의 적용성을 살펴보았다. 먼저 보강재만의 관성 모멘트를 강판만의 관성 모멘트로 나눈 값을 관성 모멘트 비라 정의하고, 여러가지 보강판에 대한 민감도 분석을 실시하였다. 보강판의 직교이방성 거동을 규명하였다. 본 프로그램의 적용성을 살펴보기 위하여, 여러가지 보강판에 대한 매개변수 연구를 수행하고, 최대 처짐에 대한 결과를 등팡성 판 요소를 이용한 ABAQUS의 결과와 비교하였다. 비교 결과, 두 결과가 잘 일치하는 특정 모멘트 비를 직교이방성 판으로 해석할 수 있는 기준으로 제안하였으며, 두 결과 사이의 오차율을 관성 모멘트 비의 함수 식으로 표현하였다. 따라서, 개단면 리브로 보강된 판을 직교이방성 판으로 해석하기 위해서는 제안한 특정 관성 모멘트 비 이상의 값을 가져야 안전측의 결과를 얻으며, 또한 본 연구에서 제안한 상관 함수를 이용하여 결과를 보정하면 간편하게 타당한 결과를 얻을 수 있을 것으로 사료된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.141-146
• /
• 2001

A post-tensioned steel plate girder bridge with cross-beams is analyzed by specially orthotropic laminate theory. The cross-sections of both girders and cross-beams are WF types. The result is compared with that of the beam theory. This bridge with simple support is under uniformly distributed vertical load, and axial loads and moment due to post-tension. In this paper, finite difference method for numerical analysis of simple supported bridge is developed. Relatively exact solution is obtained even with small number of meshes. Theory and analysis method of specially orthotropic laminate plates used in this paper can be used in design of new bridges, and maintenance and repair of old bridges.

• Structural Engineering and Mechanics
• /
• 제4권5호
• /
• pp.541-552
• /
• 1996

This paper is concerned with the structural optimization problem of maximizing the compressive buckling load of orthotropic rectangular plates for a given volume of material. The optimality condition is first derived via variational calculus. It states that the thickness distribution is proportional to the strain energy density contrary to popular claims of constant strain energy density at the optimum. An engineers physical meaning of the optimality condition would be to make the average strain energy density with respect to the depth a constant. A double cosine thickness varying plate and a double sine thickness varying plate are then fine tuned in a one parameter optimization using the Rayleigh-Ritz method of analysis. Results for simply supported square plates indicate an increase of 89% in capacity for an orthotropic plate having 100% of its fibers in $0^{\circ}$ direction.

• Steel and Composite Structures
• /
• 제48권2호
• /
• pp.145-161
• /
• 2023

This study investigates the influences of porosity on the stability of the orthotropic laminated plates under uniaxial and biaxial loadings based on the hyperbolic shear deformation theory. Three different porosity distribution are considered with three specific functions through the plate thickness. The stability equations of porous orthotropic laminated plates are derived by the virtual work principle. Applying the Galerkin method to partial differential equations, the critical buckling load relation of porous orthotropic laminated plates is obtained. After validating the accuracy of the proposed formulation in accordance with the available literature, a parametric analysis is performed to observe the sensitivity of the critical buckling load to shear deformation, porosity, orthotropy, loading factor, and different geometric properties.