• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.110-117
• /
• 2003

Pyrophosphoric modified polyesters (TATBs) were synthesized by polycondensation of adipic acid, trimethylolpropane, 1,4-butanediol, and tetramethylene bis(orthophosphate). Two-component PU flame-retardant coatings (TATBCs) were prepared by blending TATBs with HDI-Biuret. Most of the physical properties of the flame-retardant coatings were comparable to those of non-flame-retardant coatings. Coatings containing 10 and 15wt% 1,4-butanediol, TATBC-10C and TATBC-15C were not flammable in the vertical flame-retardancy test.

• 한국식품위생안전성학회지
• /
• 제22권1호
• /
• pp.37-44
• /
• 2007

피틴산(Phytic acid)dms inositol hexaphosphate로서 식물성 식품 및 씨 중에 1-5%가량 존재하는 자연 항산화 물질로서 소화효소에 의해 쉽게 분해되지 않는다. 한편 인산염은 식육에서 품질개량제로 식육에서의 항균 효과에 대해서는 이미 여러 보고가 있으나 그 결과는 다양하다. 일반적으로 생육에서는 그 효능이 낮은데 이것은 생육에 존재하는 phosphatase의 작용에 의해 인산염들이 가수분해되기 때문이다. 한편 피틴산염은 열에 강하고 쉽게 분해되지 않으므로 생육이나 멸균 처리된 식육에서 공히 인산염들이 가지고 있는 항균효과를 기대할 수 있다. 본 실험에서는 선택배지에서 E. coli O157:H7에 대한 sodium phytate(STP), sodium pyrophosphate(SPP) 및 sodium tripolyphosphate(STPP)의 항균효과를 평가하였고,더불어 생육 및 가열 처리된 식육모델에서 E. coli O157:H7 접종 후에 항균 효과를 비교 평가하였다. 선택된 배지인 tryptic soy broth에서 E. coli O157:H7에 대한 항균 효과는 SPT, SPP 및 STPP의 0.05, 0.1, 0.5%의 세 가지 농도에서 농도에 의존적으로 유의성 있게 세균 증식을 억제시켰으며, 항균효과는 SPP에서 가장 강하게 나타났다. 생육인 닭고기, 돼지고기 및 소고기에 SPT, SPP 및 STPP를 각각 0.05, 0.1, 0.3 그리고 0.5%의 농도별로 첨가했을 때 E. coli O157:H7의 증식이 모두 유의성 있게 감소하였다 (p<0.05). 또한 가열 처리한 식육에서도 이러한 항균효과가 유의적으로 관찰되었으며(p<0.05), SPT는 SPP나 STPP보다 더 강한 항균효과를 보였다. 이러한 항균효과들은 가열처리된 식육보다 생육에서 더욱 강하게 나타났다. SPT, SPP 및 STPP의 첨가는 식육에서 pH를 증가시켰으며, STP의 첨가는 식육에서 soluble orthophosphate 유리에 영향을 주지 않았으나, SPP 및 STPP의 첨가는 식육에서 soluble orthophosphate의 유리를 증가시켰다. 이러한 결과로부터 피틴산염은 이미 알려진 인산염들보다 미약하나마 항균효과가 뛰어나며 더불어 축산식품의 첨가제로서 사용시 식품의 기능성 향상과 더불어 매우 유용하게 사용될 수 있을 것이다.

• 청정기술
• /
• 제25권4호
• /
• pp.302-310
• /
• 2019

호기조와 혐기/무산소조를 직렬로 연결한 인공습지를 이용하여 크게 오염된 하천수를 처리하였다. 호기조는 자연 공기 배출 시스템을 통하여 공기가 연속적으로 공급되어 호기성 상태가 유지되었다. 인공습지의 성능에 영향을 미치는 최적의 영향인자를 조사하기 위하여 체류시간을 다르게 한 5개의 파일럿 플랜트를 사용하였다. 호기조에서 BOD (biochemical oxygen demand)와 COD (chemical oxygen demand)의 제거율은 1차 반응 속도식을 나타내었고, COD 제거 속도 상수는 BOD보다 약간 낮았다. 온도 의존성은 COD (θ = 1.0079)와 BOD (θ = 1.0083)제거에 대한 값이 거의 동일했으나 T-N 제거의 온도 의존성(θ_N)은 1.0189로 다소 높게 나타났다. SS제거율은 98%로 높았고 수력학적 부하 속도(Q/A)가 증가함에 따라 제거 효율이 증가하는 경향을 보였다. 혐기/무산소조에서 BOD와 COD 제거의 주요 메커니즘은 호기조와 완전히 다르게 나타났다. 혐기/무산소조에서 COD와 COD는 생물학적 탈질을 위한 탄소원으로 공급되었고 T-P는 혐기/무산소조 내의 orthophosphate와 자갈 사이의 양이온 교환에 의해 제거되는 것으로 조사되었다. 인공습지는 여과된 고형물에 의해 막힘 없이 성공적으로 운영되었고 고형물들은 매우 빠르게 연속적으로 분해되었다.

• 폴리머
• /
• 제30권3호
• /
• pp.238-246
• /
• 2006

본 연구에서는 인과 염소를 공유한 폴리우레탄(PU) 난연도료를 제조하여 인과 염소기의 시너지 효과에 의해 난연성을 더욱 향상시키는데 그 연구목적을 두었다. 합성은 tetramethylene bis (orthophosphate) 중간생성물(TMBO)과 neohexanediol trichlorobenfoate 중간생성물(TBA-adduct)인 이들 2종류 중간생성물과 1,4-butanediol 및 adipic acid의 4종류 단량체를 축합중합을 수행하여 4원공중합물(TTBA)을 얻은 다음, 합성된 TTBA류와 hexamethylene diisocyanate(HDI)-trimer인 경화제를 상온경화시켜 2성분계 PU 난연도료(TTBA-10C/ HDI-trimer=TTHD-10C, TTBA-20C/HDI-trimer=TTHD-20C, TTBA-30C/HDI-trimer=TTHD-30C)를 제조하였다. 제조된 TTHD류의 난연도료로서 도막시편을 제작하여 도막물성 측정용 시료로 사용하였다. 도막물성 측정 결과, 전반적으로 인 단독 함유보다 인과 염소를 공유한 쪽의 도막물성이 저하되는 경향을 나타내었다. 또한 난연성 시험으로서 수직법과 수평법의 연소성 시험법 및 $45^{\circ}$ Meckel burner법을 선정하여 난연성을 알아본 결과, 인 단독 함유보다 인과 염소를 공유한 TTHD류 쪽의 난연성이 더 좋게 나타난 것으로 보아 인과 염소에 의한 난연 시너지 효과가 일부 일어남을 인지할 수 있었다.

• Corrosion Science and Technology
• /
• 제4권3호
• /
• pp.89-94
• /
• 2005

This paper presents the results of a study that was undertaken to optimize the ratio of the components of a new multi-component inhibitor blend composed of orthophosphate/ phosphonates/ acrylate copolymer/ isothiazolone. The effects of newly developed inhibitor on carbon steel dissolution in synthetic cooling water were studied through weight loss tests, electrochemical tests, scale tests, and micro-organism tests. The obtained results were compared to blank (uninhibited specimen) and showed that developed inhibitor revealed very good corrosion, scale, and micro-organism inhibition simultaneously. All measurements indicated that the efficiency of the blended mixture exceeded 90 %. The inhibitive effects arose from formation of protective films which might contain calcium phosphate, calcium phosphonate, and iron oxide. The nature of protective films formed on the carbon steel was studied by scanning electron microscopy (SEM) and auger electron spe ctroscopy (AES). Inhibitor used in this study appeared to have better performance for scale inhibition due to their superior crystal modification effect and excellent calcium carbonate scale inhibition properties. The effect of inhibitor on microorganisms was evaluated through minimum inhibitory concentration (MIC) test. All kinds of micro-organisms used in this study were inhibited under 78ppm concentration of inhibitor.

• 미생물학회지
• /
• 제23권2호
• /
• pp.90-100
• /
• 1985

The present study was designed to investigate cellular regulation of phosphate metabolism between catabolically repressed and derepressed states in yeast (Saccharomyces uvarum). The activities of various phospatases and the contents of phosphate compounds were detected according to the culture phase and various phosphate concentrations. As the results, Saccharomyces uvarum derepressed many phosphate metabolizing enzymes such as alkaline phosphatase, acid phosphatase and ATPase more than ten fold simultaneously during catabolic repression (phospgate and sugar starvation). At the same state, the amounts of orthophosphate, nucleotidic labile phosphate and acid soluble polypgosphate were increased, compared to basal levels of normally cultivated cells. $Mg^{++}-stimulated$ type among all phospatases was appeared to have most of the enzyme activity. It could be postulated that $K^+ -stimulated$ alkaline phosphatase was directly or indirectly correlated with the synthesis of acid insoluble polyphosphate $Mg^{++}-stimulated$ phosphatase with the degradation of polyphosphates. In case of cultivation in the medium supplemented with sugar and phosphate (catabolic derepression), phospgatase activities except for alkaline phosphatase were decreased rapidly through the progressive batch culture, After 12 hrs culture, at early exponential phase, the cellular accumulation of acid insoluble polyphosphate increased about 5 fold, compared to those of the starved cells. Under catabolic repression, it could be postulated that intracellular phosphate metabolism was regulated by derepressions of phosphatases. The function of polyphosphate system was shown to compensate the ATP/ADP system as phosphate donor and energy source especially during catabolic repression.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.51-61
• /
• 2004

Reaction intermediates PCP/BZA (PBI) and tetramethylene bis(orthophosphate) (TBOP) wer synthesized from polycaprolactone (PCP) and benzoic acid (BZA) and from pyrophosphoric acid and 1,4-butanediol, respectively. Benzoic acid modified polyesters containing phosphorus (APTB-5, -10, -15) were synthesized by polycondensation of the prepared PBI (containing 5, 10, 15wt% of benzoic acid), TBOP, adipic acid, and 1,4-butanediol. The structure and characteristics of APTBs were examined using FT-IR, NMR, GPC, and TGA analysis. The increase of the amount of BZA in the synthesis of APTBs resulted in decrease in average molecular weight and kinematic viscosity. From the TGA analysis of APTBs, it was found that the afterglow decreased with the amount of BZA content at the high temperatures.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.99-109
• /
• 2006

In order to obtain the maximum flame retardancy as well as the minimum deterioration of physical properties of PU flame-retardant coatings, chlorine and phosphorus functional groups were introduced into the pre-polymer of modified polyesters. In the first step, the tetramethylene bis(orthophosphate) (TBOP) and neohexanediol dichloroacetate (DCA-adduct) intermediates were synthesized. In the second step, 1,4-butanediol and adipic acid monomers were polymerized with the two kinds of intermediates to obtain copolymers. The modified polyesters containing chlorine and phosphorus (ATBA-10C, -20C, and -30C) were synthesized by adjusting that the content of phosphorus compound was fixed as 2wt% and the contents of chlorine compound (dichloroacetic acid) were varied as 10, 20, and 30wt%. Average molecular weight and polydispersity index of the preparation of ATBAs were decreased with increasing DCA content because of the increase in hydroxyl group that retards reaction.

• 한국응용과학기술학회지
• /
• 제11권1호
• /
• pp.45-52
• /
• 1994

For the purpose of producing emulsified fire proofing agent for synthetic fibers, 2,3-dibromopropylmonoamido orthophosphate[DP-AOP] and bis(2,3-dibromopropyl)monoamidoorthophosphate[$(DP)_{2}AOP$] were synthesized, and their structures were identified by instrumental analysis, respectively. Using three kinds of emulsifiers, O/W emulsified fire proofing agents, DPF and DPDPF, were obtained corresponding to DP-AOP and $(DP)_{2}-AOP$, respectively. Various synthetic textiles were fire-retardant treated by prepared DPF and DPDPF, and fire retardancy and tearing strength of the resulting products were tested. The results showed that as the concentration of fire proofing agents increased, fire retardancy increased, but the tearing strength much decreased, where the tendencies of DPDPF were deeper than those of DPF. But, since the fire retardancy appeared favorable in the range of $10{\sim}20wt%$ of DPDPF, DPDPF is proven to be a fire proofing agent useful for various synthetic textiles.

• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.287-295
• /
• 2007

Three phosphorus functional groups were introduced in one structural unit of polymer backbone to enhance the flame retardancy of PU coatings. In the first step, we synthesized tetramethylene bis(orthophosphate) (TBOP) that contained two phosphorus functional groups in one structural unit. In the next step, we synthesized modified polyesters (ATBTP-10C, -20C, -30C) that contained triphosphorus group using TBOP, 1,4-butanediol, trimethylolpropane, adipic acid, and another functional monomer, phenylphosphonic acid (PPA). The amount of PPA in ATBTPs was adjusted from 10 wt% to 30 wt%. The structure and characteristics of ATBTPs were examined using FT-IR, NMR, GPC, and TGA analysis. From the thermo-behavior test of diphosphorus modified polyester (ATBT) and ATBTPs, the afterglow of ATBT, ATBTP-10C, ATBTP-20C, and ATBTP-30C were 24.7, 27.1, 29.0, and 31.7%, respectively. It was found from this result that the afterglow increased with the amount of PPA component.