• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.267-280
• /
• 2012

An approximate method based on an assumed mode method has been presented for the free vibration analysis of a rectangular plate with arbitrary edge constraints. In the presented method, natural frequencies and their mode shapes of the plate are calculated by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. Characteristic orthogonal polynomials having the property of Timoshenko beam functions which satisfies edge constraints corresponding to those of the objective plate are used. In order to examine the accuracy of the proposed method, numerical examples of the rectangular plates with various thicknesses and edge constraints have been presented. The results have shown good agreement with those of other methods such as an analytic solution, an approximate solution, and a finite element analysis.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.

• Wind and Structures
• /
• 제16권5호
• /
• pp.517-540
• /
• 2013

This paper presents applications of proper orthogonal decomposition in both the time and frequency domains based on both cross spectral matrix and covariance matrix branches to analyze multi-variate unsteady pressure fields on prisms and to study spanwise and chordwise pressure distribution. Furthermore, modification of proper orthogonal decomposition is applied to a rectangular spanwise coherence matrix in order to investigate the spanwise correlation and coherence of the unsteady pressure fields. The unsteady pressure fields have been directly measured in wind tunnel tests on some typical prisms with slenderness ratios B/D=1, B/D=1 with a splitter plate in the wake, and B/D=5. Significance and contribution of the first covariance mode associated with the first principal coordinates as well as those of the first spectral eigenvalue and associated spectral mode are clarified by synthesis of the unsteady pressure fields and identification of intrinsic events inside the unsteady pressure fields. Spanwise coherence of the unsteady pressure fields has been mapped the first time ever for better understanding of their intrinsic characteristics.

• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.914-919
• /
• 2000

이 논문에서는 Z-밴드용 간단한 구조의 OMT (orthogonal mode transducer)가 소개되다. 이 OMT는 몇 개의 가는 유도 봉을 이용하여 한 편파를 주어진 방향으로 유도하고. 또한 다른 직각 편파를 유도 봉을 이용하여 다른 방향으로 유도하도록 설계되었다. 이 OMT는 유도 봉들이 있는 T자 형태의 도파관 부분과 두 도파관 연결부분으로 구성되어 있고, 한 안테나와 두 개의 어댑터들과 연결되도록 세 플랜지를 갖고 있다. 유도 봉의 최적개수와 최적 위치는 CAD인 HFSS를 이용하여 수치적으로 얻었다. 제작된 OMT에서 두 폄파간의 isolation은 9.5GHz와 10.5GHz 주파수 밴드에서 42.8dB보다 높았으며, 반사계수는 -17.5dB보다 낮았다. 이 OMT는 polarimetric scatterometer 시스템에 사용되는 polarimetric 안테나에 사용되어질 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.756-759
• /
• 2005

Dynamic force microscopy utilizes the dynamic response of a resonating probe tip as it approaches and retracts from a sample to measure the topography and material properties of a nanostructure. We present recent ideas based on proper orthogonal decomposition (POD) and detailed experiments that yield new perspectives and insight into AFM. A dynamic cantilever model with Lennrad-Jones interaction Potential which includes attractive and repulsive van der Waals demonstrates the resonable tapping mode response in time and frequency.

• Wind and Structures
• /
• 제32권3호
• /
• pp.227-238
• /
• 2021

This study analyzed the pressure patterns and local pressure of tall buildings with corner modifications (recessed and chamfered corner) using wind tunnel tests and proper orthogonal decomposition (POD). POD can distinguish pressure patterns by POD mode and more dominant pressure patterns can be found according to the order of POD modes. Results show that both recessed and chamfered corners effectively reduced wind-induced responses. Additionally, unique effects were observed depending on the ratio of corner modification. Tall building models with recessed corners showed fluctuations in the approaching wind flow in the first POD mode and vortex shedding effects in the second POD mode. With large corner modification, energy distribution became small in the first POD mode, which shows that the effect of the first POD mode reduced. Among building models with chamfered corners, vortex shedding effects appeared in the first POD mode, except for the model with the highest ratio of corner modifications. The POD confirmed that both recessed and chamfered corners play a role in reducing vortex shedding effects, and the normalized power spectral density peak value of modes showing vortex shedding was smaller than that of the building model with a square section. Vortex shedding effects were observed on the front corner surfaces resulting from corner modification, as with the side surface. For buildings with recessed corners, the local pressure on corner surfaces was larger than that of side surfaces. Moreover, the average wind pressure was effectively reduced to 88.42% and 92.40% in RE1 on the windward surface and CH1 on the side surface, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.372-378
• /
• 2005

Finite element analysis of concrete slab system in apartment building was executed using the tables of orthogonal arrays, and optimal design process was proposed. At first, experimental results show that sound peak components to influence the overall level and the rating of floor impact sound insulation were coincident with natural frequencies of the reinforced concrete slab. Finite element model of concrete slab was compared with experimental results, and well corresponded with an error of less than 10%. The tables of orthogonal arrays were used for finite element analysis with 8 factors. 3 related to material properties and 5 related to slab shape parameters and its results were analyzed by statistical method, ANOVA. The most effective factor among them was slab thickness, and main effect factor from slab shape parameters was different from each natural frequency. The interaction was found in the higher mode over $3^{rd}$ natural frequency. From main effect plot and interaction plot, the optimal design factor to increase the natural frequency was determined.

• 제어로봇시스템학회논문지
• /
• 제6권11호
• /
• pp.1022-1032
• /
• 2000

We propose a sliding mode controller tracking the states of a time-varying reference model. The reference model generates the desired trajectories of the states, and the sliding mode controller regulates robustly the errors between the desired states and the measured states. We apply this controller to the overhead crane. Its reference model generates the trajectories of the damped-out swing angle and the swing angular velocity to suppress the swinging motion caused by the acceleration and the deceleration of crane transportation. Also, this model generates the desired trajectories of the position and velocity of the crane. The crane model is identified from the experimental data using an orthogonal function. Kalman filtering is applied to estimate the crane states. The designed controller is simulated on a computer and is tested through a 2-ton industrial overhead crane using the vector-controlled servo motor system. It is verified that, from the simulated and experimental results, the sliding mode controller tracking a time-varying reference model works well.

• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.300-304
• /
• 2015

본 논문에서는 무선전력전송용 전 방향 빔 조향 직교 공진기를 제안하였다. 전 방향 빔 조향 직교 공진기는 2개의 루프를 수직으로 교차하여 이들의 연결 관계를 스위치로 제어하는 방식이다. 스위치의 연결 방식에 따라 루프에 흐르는 전류의 방향이 결정되고, 그에 따라 빔 조향 방향이 결정된다. 수직으로 교차한 공진기의 전류와 그에 따라 형성되는 자기장의 벡터 합의 원리를 이용하여 대각선 방향으로의 빔 조향을 실현하였다. 4개의 스위치 mode를 통해서 총 8개 방향으로 빔 조향이 가능하다. 적합한 스위치 mode를 사용하여 전 방향에 대한 전송 효율을 구하면 시뮬레이션과 측정 결과가 각각 56.3~60.0 %(편차 3.7 %), 41.2~48.7 %(편차 7.5 %)으로 비교적 전 방향에 대해 균일한 전송 효율을 얻을 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제8권4호
• /
• pp.89-95
• /
• 2008

해상통신에서 운용되는 OFDM (Orthogonal Frequency Division Multiplexing)통신 단말기는 긴급재난시에도 동작하여야 하므로, 저전력으로 동작하여야 한다. 따라서 Digital Signal Processing (DSP) 동작하는 전압모드 Processor보다 저전력 동작이 가능한 전류모드 FFT (Fast-Fourier-Transform) Processor의 설계가 필요하게 되었다. IVC (Current-to-Voltage Converter)는 전류모드 FFT Processor의 출력 전류를 전압 신호로 바꾸는 디바이스로써, 저전력 OFDM 단말기 동작을 위해 IVC의 전력 손실은 낮아야 하고, FFT의 출력 전류가 전압신호에 대응이 될 수 있도록 넓은 선형적인 동작구간을 가져야 하며, 향후, FFT LSI와 IVC가 한 개의 칩으로 결합되는 것을 고려하면, 작은 크기의 chip size로 설계되어야 한다. 본 논문에서는 선형 동작 구간이 넓은 새로운 IVC를 제안한다. 시뮬레이션 결과, 제안된 IVC는 전류모드 FFT Processor의 출력 범위인 -100 ~100[uA]에서 0.85V~1.4V의 선형동작구간을 갖게 됨을 확인하였다. 제안된 IVC는 전류모드 FFT Processor와 더불어 OFDM을 이용한 저전력 해상 데이터통신 실현을 위한 선도 기술로 유용할 것이다.