• The korean journal of orthodontics
• /
• v.40 no.3
• /
• pp.145-155
• /
• 2010

Objective: Lateral cephalometric radiographs have been the main form of resource for assessing two dimensional anteroposterior airway changes. The purpose of this study was to evaluate the three dimensional volumetric change in the upper airway space in Class III malocclusion patients who underwent mandibular setback surgery. Methods: Three dimensional cone-beam computed tomographs (CBCT) and their three dimensional reconstruction images were analyzed. The samples consisted of 20 adult patients (12 males and 8 females) who were diagnosed as skeletal Class III and underwent mandibular setback surgery. CBCTs were taken at 3 stages - Baseline (1.8 weeks before surgery), T1 (2.3 months after surgery), and T2 (1 year after surgery). Pharyngeal airway was separated according to the reference planes and reconstructed into the nasopharynx, the oropharynx and the hypopharynx. Measurements at Baseline, T1, and T2 were compared between groups. Results: The result showed the volume of the pharyngeal airway decreased significantly 2.3 months after surgery (p < 0.001) and the diminished airway did not recover after 1 year post-surgery. The oropharynx was the most decreased area. Conclusions: These findings suggest that mandibular setback surgery causes both short-term and long-term decrease in the upper airway space.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.225-232
• /
• 2011

Purpose: This study was designed to retrospectively evaluate the postsurgical initial stability of the Le Fort I osteotomy with posterior impaction and rigid internal fixation for the correction of mandibular prognathism with midface deficiency. Particular attention was paid to the magnitude and direction of the initial postsurgical change. Methods: 20 healthy patients with mandibular prognathism and midface deficiency participated in this study. All patients underwent Le Fort I osteotomy with posterior impaction and mandibular setback BSSO by one surgeon. Preoperative (T0), immediate postoperative (T1) and follow-up period (T2) cephalograms were taken and analyzed. Change between T0~T1 and T1~T2 was measured and analyzed. Results: Between T0~T1, significant differences were observed in all measurements except the ANS point and mandibular plane angle. Between T1~T2, only the occlusal plane angle was significantly changed. No significant changes were found in all other measurements. Conclusion: This study indicates that Le Fort I osteotomy with posterior impaction is stable at initial stages. Although changes in the occlusal plane angle were observed, it was caused by tooth movement after post-operative orthodontic treatment. However, more studies with larger samples are required to form definitive conclusions. Conclusion: This study indicates that Le Fort I osteotomy with posterior impaction is stable at initial stages. Although changes in the occlusal plane angle were observed, it was caused by tooth movement after post-operative orthodontic treatment. However, more studies with larger samples are required to form definitive conclusions.

• Korean Journal of Cleft Lip And Palate
• /
• v.8 no.2
• /
• pp.71-79
• /
• 2005

Purpose: Maxillary hypoplasia is a common developmental problem of cleft lip and palate. Fair results with distraction osteogenesis have been reported especially when these patients need a large amount of maxillary advancement, instead of orthognathic surgery. The purpose of this study is to evaluate the clinical results with a relatively new distractor, $TS-MD^{(R)}$ (Trans-sinusoidal maxillary distractor, KLS Martin, Tuttlingen, Germany) which was used for the advancement of the maxilla in the cleft patients. Patients and Method: Distraction osteogenesis using $TS-MD^{(R)}$ was performed for four CLP patients (three males and one female) who had maxillary hypoplasia. All patients were over 16 years old. As three patients showed mandibular prognathism as well, bilateral sagittal split ramus osteotomy for mandibular setback was performed at the same time. After consolidation periods of 4 to 12 weeks, the distraction devices were removed and miniplates were placed for simultaneous internal fixation. Results: Three patients showed a large amount of incisal overbite but one patient did not have sufficient maxillary advancement. Le Fort I osteotomy, maxillary advancement and internal fixation should have been performed for the patient when removing the distraction devices. Different from the $clinician{\box}s$ expectation, the amount of maxillary advancement using $TS-MD^{(R)}$ was not sufficient, although the device has rigid mechanical property. Rotation of maxilla during distraction forward and downward was also observed. Conclusion: Even though the maxillary advancement with $TS-MD^{(R)}$ device could be achieved, the clinical control of some characteristics related with the device was necessary. More clinical studies on $TS-MD^{(R)}$ should be performed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.355-373
• /
• 1995

Craniofacial region is a musculodentoskeletal system that consists of many anatomical structures ; cranioskeletal structures, dental arches, and formation and functions of masticatory muscles have close correlations. Growth and development of craniofacial region are influenced by not only hereditory factors, but also environmental factors such as craniofacial muscles and surrounding tissues. On the contrary, however, study on changes in functions or adaptations of craniofacial muscles following changes of craniofacial skeletal structures has been somewhat insufficient. The author's purpose was to observe correlations between masticatory muscular functions and change patterns according to cranial skeletal structures and occlusion patterns, for this, comparative study of muscle activity changes of preand post- orthognathic surgery states in skeletal Cl III malocclusion patients was peformed. The selected sample groups were 15 normal male patients, 15 skeletal Cl III pre-orthognatic surgery patients and 15 skeletal Cl III post-orthognatic surgery patients. For each sample groups, cephalometric x-ray taking, masticatory efficiency test and measurements of muscle activities in anterior temporal muscle, masseter and upper lip in rest, clenching, chewing and swallowing were carried out. The following results were obtained : 1. In resting state of mandible, pre-surgery malocclusion group showed higher m. activities in ant. temporalis, masseter and upper lip than post-surgery group. Post-surg. malocc. group showed significantly high m. activity only in upper lip compared to the normal group. 2. In clenching state, post-surg. malocc. group showed higher m. activities in ut. temporalis, masseter and upper lip than pre-surg. malocc. group. 3. In chewing state, post-surg. malocc. group showed higher m. activities in ant. temporalis and masseter than pre-surg. malocc. group, on the other hand, decreased upper lip activity was noticed. 4. In swallowing state, post-surg. malocc. group showed lower upper lip activity than pre-surg. malocc. group but higher than that of the normal group. No significant difference in m. activities of ant, temporalis and masseter was noticed among the three groups. 5. Masticatory efficiency was lower in pre-surg. malocc. group than normal group, masticatory efficiency showed an increase in post-surg. malocc. group compared to the pre-surg. malocc. group. However, both groups showed significant differences compared to the normal group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.204-214
• /
• 2023

The occlusal treatment including prosthetic treatment should be considered when the pathologic symptom was observed with the excessive discrepancy between the centric relation occlusion (CRO) and the maximum intercuspal position (MIP). Through careful diagnosis, the malocclusion and interarch relationship can be analyzed, and occlusal adjustment, restorative treatment, orthodontic therapy, or orthognathic surgery can be performed depending on the degree of disharmony. The patient in this case report complained the unstable occlusion and loss of masticatory function that had been occurring for several years. At the time of the visit, the patient showed severe occlusal disharmony, with only the upper right second molar contacting the lower jaw at the maximum intercuspal position. Based on the analysis of the occlusion, it was difficult to solve the problem with just occlusal adjustment or restorative treatment. In addition, the patient had the skeletal class II malocclusion between the upper and lower jaws. Therefore, for resolving the severe skeletal class II malocclusion, pre- and post-orthodontic treatment, bilateral sagittal split ramus osteotomy (BSSRO) was performed. After that, the occlusal adjustment was performed for stable occlusion, and the missing teeth area was restored with dental implants. During the follow-up period, a periodic follow-up visits and additional occlusal adjustments were performed to achieve a stable centric occlusion and harmonious anterior and lateral guidance. As a result, the final prosthodontic treatment was completed, and the patient's masticatory function was restored.

• The korean journal of orthodontics
• /
• v.38 no.2
• /
• pp.83-94
• /
• 2008

Purpose: The first objective of this study was to compare the upper midface morpholgy, focusing on the soft tissues, between skeletal Class III maloccusion patients with midfacial depression and the norm. The second objective was to estimate and analyze the change in the upper midface soft tissues following surgical correction with maxillary advancement by Lefort I osteotomy and mandibular setback by bilateral sagittal split osteotomy (BSSRO). Methods: The samples consisted of 34 adult patients (15 males and 12 females) with an average age of 21 years, who had severe anteroposterior discrepancy with midfacial depression. These patients had received presurgical orthodontic treatment and surgical treatment which consisted of simultaneous Lefort I osteotomy and BSSRO. Results: The correlation coefficient between changes in maxillary advancement and changes in Or' (soft tissue orbitale) was 0.599 (p < 0.05). Change in maxillary plane angle and vertical change of the maxilla were not correlated with the change in Or' (p < 0.05). The ratio of soft tissue change in Or' to maxillary advancement was 43.57 %, and 81.54 % in Sn. Regression equations between maxillary movement and Or' were devised. The $r^2$ value was 0.476. Conclusions: The majority of measurements in the upper midface in skeletal Class III maloccusions when compared to the norm, showed significant differences. In Class III malocclusion with midfacial depression, maxillary advancement produces soft tissue change in the upper midface.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.36-42
• /
• 2009

Objective: The purposes of this study were to provide an epidemiologic data base related to the orthodontic treatment need and to know the changing trends about treatment modality of private orthodontic clinics. Methods: Distribution, trends and orthodontic treatment plan of malocclusion patients were investigated in 1,620 consecutive patients who had been visited and examined in 4 private orthodontic clinics located in Seoul from 2003-2006. Results: Percentage of male and female patients was 26.9% and 73.1% respectively Age distribution had shown that percentage of the patients above 13 years was 78.9%, and above 19 years was 59.0%. Average age of whole patients was 20.5 years. With regard to Angle classification, each percentage of Class I, Class II division 1, Class II division 2 and Class III malocclusion was 38.9%, 34.8%, 2.3% and 24.0%. The percentage of extraction cases(00.9%) outnumbered nonextraction cases(39.1%) and 46% of extraction cases were upper and lower 1st premolar extraction cases. Patients who had chose treatment with fixed appliance and orthognathic surgery was 10.2%. Conclusions: Because the high percentage of adult, Class II malocclusion and orthognathic surgery cases in patients of private orthodontic clinics were shown in this study, orthodontic education program and national health policy in Korea need reformation.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.361-373
• /
• 2002

The purpose of this study was to evaluate the morphological changes of olveolar bone and mandibular symphysis of lower incisor by presurgical orthodontic treatment and orthognathic surgery in skeletal class III malocclusion. The sample consisted of 30 adult class III malocclusion patients who have received bilateral sagittal split mandibular osteotomy. Lateral cephalograms were taken before treatment, after presurgical orthodontic treatment and 3 months after orthognathic surgery. Skeletal and symphyseal measurements were compared and the relationships between them were analysed. The results were as follow : 1. The labial and lingual alveolar bone height in presurgical and postsurgical group were decreased than that of pretreatment group. 2. The vertical measurements of the craniofacial skeleton showed reverse correlationship with anteroposterior width of basal alveolar bone, but IMPA showed correlatiionship (p<0.01) 3. The craniofacial skeleton and the change of symphyseal measurements(symphyseal length, symphyseal width) showed no correlationship. 4. The labial alveolar bone height showed correlationship with lingual alveolar bone height(p<0.001), and negative correlationship with lingual alveolar crestal width(p<0.01). Labial and lingual alveolar crestal width has negative correlationship (p<0.05). Mandibular symphyseal length and width has positive correlationship(p<0.01). 5. IMPA, LISA showed negative correlationship with labiolingual alveolar bone height and lingual alveolar width and positive correlationship with labial alveolar base bone width.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.283-298
• /
• 2008

Objective: The purpose of this study was to investigate changes in the mandibular dental arch from presurgical orthodontic treatment and orthognathic surgery, and to evaluate the relationships between the pretreatment records and changes of mandibular dental arch in skeletal Class III malocclusion individuals. Methods: Lateral cephalometric radiographs and mandibular study models of 31 adults with skeletal class III malocclusion were taken and measured. All measurements were evaluated statistically by ANOVA, Scheffe's Post Hoc, and paired t-test, and correlation coefficients were evaluated. Results: No significant difference in Mn-LMMC, Mn-LIE, Mn-MnOcc was detected between pretreatment and presurgical groups. Statistically significant but low correlations were demonstrated between the initial arch length discrepancy (ALD) and change in ICW, IPW1 (r = 0.492, 0.615) and change in arch length (r = 0.641). No association was seen between the initial depth of curve of Spee and change in mandibular incisor angle and arch width or arch length. Regression analysis showed that the amount of change for arch length and IPW1 could be explained by 64.0% and 75.8% of the pretreatment variables respectively. Conclusions: This study suggests that orthognathic surgery results can be predictable by measuring the pretreatment records.