• 대한치과의사협회지
• /
• 제11권2호
• /
• pp.123-129
• /
• 1973

The authors measured orthodontic force using the orthodontic materials of the Rocky Mountain Products Company. The results were as follows : ① Use latex of wide diameter in long distance, and when the latex of wide diameter activated by four or five times, we obtained a optimal force. ② The authors obtained canine retractions with sectional arch. Activation of sectional arch began at 1mm and had to do not activations of 3mm more. ③ The leveling started from .014 green round wire and finished to. 0.16" green Elgiloy round wire. Permit only a mild force in ideal arch form, in rectangular wire. ④ Fundamentaly, elastic thread obtained maximum force by activating as two times. ⑤ Coil spring obtained more heavy force from short distance than long distance.

• 대한치과의사협회지
• /
• 제51권3호
• /
• pp.138-147
• /
• 2013

Orthodontic tooth movement is a unique process which tooth, solid material is moving into hard tissue, bone. Orthodontic force in general provides the strain to the PDL and alveolar bone, which in turn generates the interstitial fluid flow(in detail, fluid flow in PDL and canaliculi). As a results of matrix strain, periodontal ligament cells and bone cells are deformed, releasing variety of cytokines, chemokines, and growth factors. These molecules lead to the orthodontic tooth movement(OTM). In these inflammation and tissue remodeling sites, all of the cells could closely communicate with one another, flowing the information for tissue remodeling. To accelerate the rate of OTM in future, local injection of single growth factor(GF) or a combination of multiple GFs in the periodontal tissues might intervene to stimulate the rate of OTM. Corticotomy is effective and safe to accelerate OTM.

• 대한치과교정학회지
• /
• 제11권2호
• /
• pp.65-70
• /
• 1981

In the present study orthodontic force was applied to the molars of control group and experimental group treated with the lathyrogen beta-aminopropionitrile (BAPN). Observation resulted in the following conclusions : 1) New alveolar bone formation in response to orthodontic force in BAPN-treated rats exceeded corresponding bone formation in control of cup when measured at two tension sites in the periodontal ligament. 2) BAPN administration produced disorganization of the collagenous fibers of the periodontium of experimental group. Multiple eosinophilic cell-free areas were found distributed throughout the radicular portions of affected periodontal ligaments. 3) The areas of periodontium surrounding orthodontically treated teeth exhibited relatively normal organization under these conditions, while the periodontium of adjacent nonorthodontically treated teeth was disorganized. 4) The present results suggest that the typical histologic response to orthodontic force application can occur in the presence of a chemically and physically altered periodontium.

• 대한치과교정학회지
• /
• 제18권2호
• /
• pp.311-327
• /
• 1988

Vascular changes in the periodontal ligament of the rat incisors following application of experimental orthodontic forces were examined by the India ink perfusion method. 57 rats were used for this experiment. The rats were divided into experimental group (54 rats) and control group (3 rats). 54 experimental rats were divided into group I (27 rats) and group II (27 rats). The right and left upper incisors of group. I and group II rats were separated distally with forces of 20gm, 70gm respectively. The vascular changes of periodontal ligament were observed histologically by means of light microscope after 1, 2 and 3 days of tooth movement and 1,3,5,8,14, and 21 days after removal of orthodontic force. The results were as follows; 1. After one day of tooth movement, occlusion of blood vessels, hyalinization of periodontal ligament and resorption of alveolar bone adjacent to the alveolar crest on pressure side were observed. Above the tissue changes on the pressure side of group II were more severe than those of group I. Especially, septal bone of group II was separated after 2 days of tooth movement. 2. In tension zones, periodontal space was widened and periodontal fibers were orientated in the direction of puil. The blood vessels of periodontal ligament were distended. New bone deposition was seen along the inner surface of the alveolus after 2 days of tooth movement. 3. After 3 days of tooth movement, deposition of new bone was seen along the periosteal surface of alveolar bone on pressure side, progressing with increasing after removal of orthodontic force. Remodelling of the new bone was occurred 5 days after removal of orthodontic force. 4. 3 days after removal of orthodontic force, invasion of blood vessels into the marginal periodontal ligament on pressure side was observed clearly and the vessels below the epithelial attachment were increased. 5. After removal of orthodontic force, hyalinized structures disappeared concomittantly with an invasion of blood vessels from the neighboring periodontal ligament. 14 days after removal of orthodontic force, the vessels in the periodontal ligament of group I were finished the vascular rearrangement. 21 days after removal of orthodontic force, the vessels in the periodontal ligament of group II were finished the vascular rearrangement.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.897-916
• /
• 1994

The biologic potential, which is different from the piezoelectric signals, relates tooth movement at least in part to changes in bone metaboliosm in bioelectric theory. The purpose of this experiment was to determine wheather the application of half sine-wave pulsed electromagnetic fields (HSPEMF) could increase both the rate and amount of orthodontic tooth movement. Forty-three male Hartley guinea pigs, weighting approximately 255g, were utilized in this study. The animals were 35 days old at the start of the study. Laterally directed orthodontic force was applied to the maxillary central incisors of 40 Hartley guinea pigs (20 experimental, 20 control). According to the amount of orthodontic force (6g, 12g), they were divided into two sub-groups (10 experimental I, 10 experimental II, 10 control I, 10 control II). During the experimental period, experimental animals were placed in plastic animal holders with their heads positioned in an area of uniform electromagnetic field. Control animals were placed in similar plastic holders that did not carry the electric apparatus. The results were as follows : 1. The application of a HSPEMF to the experimental groups significantly increase the final amount of orthodontic tooth movement observed over a 10-day experimental period. 2. The application of a HSPEMF to the experimental groups significantly increase the velocity of orthodontic tooth movement observed over a 10-day experimental period. 3. There was no significant difference in the final amount of orthodontic tooth movement at the fourth day to the eighth day, but there was significant difference in the final amount of orthodontic tooth movement at the nineth, tenth day during a 10-day experimental period. 4. After 10 days of HSPEMF exposure & orthodontic force, the experimental groups demonstrated more osteodasts in the pressure side than control groups.

• 대한치과교정학회지
• /
• 제23권4호
• /
• pp.485-492
• /
• 1993

Multiloop Edgewise Archwire(MEAW) is effective in relief the Curve of Spee in mandibular arch but up Sl down orthodontic elastics must be used with it. The purpose of this study was to analyse the effect of orthodontic elastics, like as up & down elastics, Class II elastics, and Class III elastics, and the effect of L loop in Multioop Edgewise Archwire. 1. Intrusive force of MEAW in anterior teeth was reduced and uprighting force in premolars was increased by up & down elastics. 2. Uprighting force was significintly increased with Class III elastics in multiple L loop arch wire. 3. The force of Class II elastics made molars tip mesially and Curve of Spee deep.

• 대한치과의사협회지
• /
• 제47권10호
• /
• pp.656-668
• /
• 2009

It is difficult to perform orthodontic treatment for cleft lip and palate patient. Although there are many orthodontic appliances to expand narrowed maxillary arch, results are rarely successful and the possibility of relapse is increased due to severe scars. Self-ligating bracket, recently used in orthodontic treatment, suggests solution of crowding by expansion of dental arches. Light and continuous force could apply for orthodontic movement due to characteristic low friction of self ligating bracket, which gives expansion force until dentition reaches its new equilibrium position and it can be expressed as spontaneous lateral expansion with heavy labial tension. This kind of expansion force is thought to be a possibility of expanding the constricted maxillary arch of cleft lip and palate patient. Repositioning of the maxilla by Le Fort I osteotomy in case of severe maxillary deficiency, increases the possibility of relapse because of limitation in anterior movement and adaptation of soft tissue. In these cases, distraction osteogenesis(DO) can be applied for stable result. We report a case of cleft lip and palate patient with narrowed maxillary arch and maxillary deficiency using self ligating bracket and DO.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.492-505
• /
• 2007

Statement of problem: An orthodontic miniscrew implant has been used as a skeletal anchorage for orthodontic treatment. However, any relation among the influence of the cortical bone, morphologic differences of orthodontic miniscrew implants and new bone formation hasn't been made clear yet. Purpose: The purpose of this study was to evaluate whether the orthodontic miniscrew implant could work as an intraoral skeletal anchorage immediately and stably for orthodontic treatment after insertion of it. Material and methods: Two types of orthodontic miniscrew implants were used in this experiment; tapered type and straight type. One hundred and sixty eight orthodontic miniscrew implants were inserted into the tibiae of 21 rabbits and sacrificed on 3, 7, 11, 14, 21 and 28days later after insertion of them to study removal torque values and histologic and histomorphometric analyses. Results: The results were as follows. 1. The removal torque values of the tapered type were higher than those of the straight type in all groups(p<0.05). 2. There wasn't any distinguishing differences between the tapered type and the straight type about the new bone formation percentage. 3. The removal torque values for both the tapered type and the straight type were gradually decreased at early stages of the test but started to increase at the 7 days group of the straight type and the 11 days group of the tapered type. 4. New bone formation percentage was increased gradually for both the tapered and the straight types as time passed(p<0.05). 5. It was found that the tapered type showed lower values in the cortical bone about both the maximum equilibratory stress distribution and the maximum principal stress distribution than the straight type in linear finite elements analysis. Conclusion: According to the research, the removal torque values were decreased at 7 days group of the tapered type and 11 days group of the straight type after the insertion of the orthodontic miniscrew implants in tibiae of rabbits. Considering the human bone activity, it is better to apply the orthodontic force $3{\sim}4$ weeks later than to apply it immediately after the insertion of orthodontic miniscrew implants. Considering that general orthodontic force is about $250{\sim}500$ grams, the tapered type can be worked as a stable skeletal anchor age in an orthodontic treatment even if the orthodontic force is applied on it immediately after the insertion of it.

• 대한치과교정학회지
• /
• 제23권2호
• /
• pp.283-294
• /
• 1993

The friction of orthodontic appliances is recogonized to be detrimental to tooth movement. The purpose of this study was to determine the magnitude of frictional force changes between bracket$(018'\times025'\;solt)$ and orthodontic wires(stainless steel, cobalt-chromium, and $\beta-titanium$, $017'\times0.25'$ rectangular) with time. The wire was secured in the bracket slot with a elastomeric ligature. Frictional forces were measured by universal testing machine. The following conclusions were obtained. 1. The frictional forces under dry condition were greater than those in saliva. 2. The frictional forces produced by cobalt-chromium wire were less than those generated by stainless steel and $\beta-titanium$ wire. 3. The frictional forces increased progressively with time, and the amount of increase on first two weeks was greater than on last two weeks. 4. The change of frictional force under dry condition was greater than in artificial saliva.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.198-203
• /
• 2004

In these days, the orthodontic surgery including lingual orthodontics has attracted a person' attention due to its functional and esthetic appreciation. The delivery of the optimal orthodontic treatment is greatly influenced by clinician' ability to predict and control the tooth movement by applying force system to dentition. The skeletal anchorage system with the miniscrew has been used recently in the lingual orthodontics to assist the anchorage control. Precise understanding of the force system produced from the various orthodontic appliances is necessary. However, the qualitative and quantitative effect of the miniscrew has not been identified well. In this paper, three dimensional finite element analysis is introduced on the lingual orthodontics to investigate the effect of anterior retraction force on the miniscrew and transpalatal arch wire. The purpose of this study is to determine the location of the miniscrew and the point of force application of the anchorage system in the lingual orthodontics. The analysis results indicate the efficient position of the miniscrew and the transpalatal arch wire in the lingual orthodontics.