• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.55-60
• /
• 2003

Case that long-fiber reinforced polymeric composites of fiber orientation situation of a direction state is J=1 that is direction of tensile strength of another state appeared highest. And theoretical tensile strength value of long-fiber reinforced polymeric composites board of fiber orientation situation of a direction state appeared similarly with tensile strength value that long-fiber reinforced polymeric composites board of fiber orientation situation of a direction state. Also, than case that efficiency of fiber orientation situation of long-fiber reinforced polymeric composites is J=1 in it is J=0.1 of fiber orientation situation effect of long-fiber reinforced polymeric composites about 60% high appear.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.202-205
• /
• 2003

Investigated whether fiber orientation situation of fiber reinforcement macromolecule composition board and the fiber inclusion rate are perpendicular and horizontal direction tensile strength and some correlation. Fiber orientation situation of tensile strength of 0 direction of composition board increased changelessly by aeolotropy in isotropy. Tensile strength of 90 direction that is isotropy and tensile strength of 0 direction that is aeolotropy agreed almost. Get into aeolotropy, the reinforcement rate of fiber decreased. When load interacts for width direction of reinforcement.

• 한국측량학회지
• /
• 제26권4호
• /
• pp.323-331
• /
• 2008

수치사진측량은 사진상에 나타난 대상물의 2차원적 형상으로부터3차원적 기하형상을 측정하고 묘사하는 기술로서 여러 과학 분야에서 그 활용가능성이 증대되고 있다. 그럼에도 불구하고 정밀을 요하는 건설 기계분야에서 수치사진측량 방법 대신 값비싼 계측장비를 이용하는 경우가 많고, 마땅한 계측장비가 없어 시각적인 방법으로 분석하는 경우도 발생한다. 따라서 본 연구에서는 보강토 옹벽 실내모형 시험 장치의 모형옹벽 파괴전과 파괴 후에 대한 모형지반 변형량을 빠르게 측정하기 위해 이동식 표정판을 이용한 수치근접사진측량기법을 개발하였다. 그리고 그 측정 결과값들은 각측정기로 획득한 결과값과 비교하였다.

• 제어로봇시스템학회논문지
• /
• 제12권3호
• /
• pp.241-247
• /
• 2006

We propose a character recognition system to extract the component reference names from printed circuit boards (PCBs) automatically. The names are written in horizontal, vertical, reverse-horizontal and reverse-vertical directions. Also various symbols and figures are included in PCBs. To recognize the character and orientation effectively, we divide the recognizer into two stages: character classification stage and orientation classification stage. The character classification stage consists of two sub-recognizers and a verifier. The rotaion-invarint features of input pattern are then used to identify the character independent of orientation. Each recognizer is implemented as a neural network, and the weight values of verifier are obtained by genetic algorithm. In the orientation classification stage, the input pattern is compared with reference patterns to identify the orientation. Experimental results are presented to verify the usefulness of the proposed system.

• 수산해양교육연구
• /
• 제27권3호
• /
• pp.725-734
• /
• 2015

In contemporary society, many fishery industries face a serious problem of having an insufficient number of junior ship officers and engineers. Even though many fishery high schools in Korea made significant effort to produce many talented junior officers and engineers, but after graduation, the students are reluctant to get a job on the fishing vessels. Furthermore, Korean government also invested a large amount of money to train students for ocean-going and costal & near-ocean fishing vessels. However, despite the government's great effort on the training program and education, only a few students wish to work on the fishing vessels. In this article, the author tried to find answers for various questions such as what are the factors that the student prefer, where the student to want to get a job in fishery industries, and how student feel about working at fishing vessels. Furthermore, the author also analyzed the differences between high school student group and Korea Institute of Maritime and Fisheries Technology(KIMFT) student group about occupational orientation by utilizing SPSS statistical program. Additionally, the author surveyed the current onboard status of job position of the high school and KIMFT alumni. This study's results and data will be used for aiding further stimulation and advertisement of job position in fishing vessels and continued daily lives on board.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1068-1078
• /
• 2018

Experiments were performed to investigate bubble behaviors and pool boiling Critical Heat Flux (CHF) on a thin flat rectangular copper heater fabricated on Printed Circuit Board (PCB), at various inclination angles. The surface inclination angles were $0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$, and $180^{\circ}$. Results showed the Onset of Nucleate Boiling (ONB) heat flux increased with increasing heater orientation from $0^{\circ}$ to $90^{\circ}$, while early ONB occurred when the heater faced downwards ($135^{\circ}$ and $180^{\circ}$). The nucleate boiling was observed to be unstable at low heat flux (1-21% of CHF) and changed into typical boiling when the heat flux was above 21% of CHF. The result shows the CHF decreased with increasing heater orientation from $0^{\circ}$ to $180^{\circ}$. In addition, the bubble departure diameter at the heater facing upwards ($0^{\circ}$, $45^{\circ}$, and $90^{\circ}$) was more prominent compared to that of the heater facing downward ($135^{\circ}$). The nucleation site density also observed increased with increasing heat flux. Moreover, the departed bubbles with larger size were observed to require a longer time to re-heat and activate new nucleation sites. These results proved that the ONB, CHF, and bubble dynamics were strongly dependent on the heater surface orientation.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.383-392
• /
• 2024

Laminated bamboo is an engineered bamboo technology to maintain its mechanical durability for both construction and furniture materials. This study was conducted to assess the properties of laminated bamboo made from Betung bamboo at different culm positions and laminate orientations. The materials used in this study were 4-year Betung bamboo (Dendrocalamus asper) obtained from a community forest in Yogyakarta and polyvinyl acetate resin as adhesive. Two factors were applied for this study, i.e., culm position (lower, middle, and upper) and laminate orientations (vertical and horizontal direction). To examine the mechanical properties, a static bending test and the hardness test were performed in accordance with ASTM D1037-99. Moisture content and density were determined in accordance with BS 373-1957. The results indicated that there was no interaction between the culm position and laminate orientation on the moisture content, density, static bending properties and hardness. The culm position affected the static bending and hardness, with the higher position of the culm resulting a greater strength. The laminate orientation also affected the strength of laminated bamboo, with the vertical direction resulting in higher strength than the horizontal.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.364-369
• /
• 2003

Crack propagation and AE characteristics of CFRP plain woven laminate composites are examined with acoustic sensor by AEDSP 32/16 board in PC system. AE signals are measured during the fracture behavior tests. The purpose of study is the estimation of the crack extension behavior effected between three kinds of fiber orientation for plain woven CFRP laminate composite and the relationship between AE characteristics and load-displacement curves and crack extension length.

• 한국측량학회지
• /
• 제34권5호
• /
• pp.495-501
• /
• 2016

본 연구는 시간경과에 따른 보강토 옹벽의 변위를 측정하기 위해, 근거리수치사진측량을 적용하였으며, 기준점 측량없이 영상으로부터 외부표정요소와 3차원 위치를 결정하기 위해 표정판 활용 방법을 제안하였다. 표정판으로 계산한 보강토 옹벽의 변위를 토털스테이션으로 측정한 변위와 비교한 결과 5cm 이내의 오차를 보였으며, 시공 후 3개월이 지난 보강토 옹벽의 변위는 없었다. 따라서 사진측량용 표정판을 이용한 제안방법으로 보강토 옹벽의 변위측량이 가능하다는 것을 제시할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.504-509
• /
• 1994

Recently SMT is used widely to place the SMD on bare board which is very small and highly integrated. And that is one of the issue directly in the electric products assembly process and especiallly in the field of optimizing electric product's performance, automatically tuning method which is highly demanded in the electronics industry. To tune product's performance, variable resistances's resistivity should be changed until it has good performance characteristics. In this paper to automatically regulate the 8mm camcoder's performance, it is proposed variable resistence's center position and orientation detection algorithm by image processing, which has very precise and accurate result. And we found optimal conditions which can have effects on image acquisition process. And real time processing is done by DSP to detect vr's center and orientation. This results make it possible to utilize proposed image processing algorithm and system directly in electronics industry.