• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.90-103
• /
• 2014

Distribution characteristics of water masses, dissolved inorganic and organic nutrients were investigated in the southern part of the East Sea of Korea in September, 2011. On the basis of the vertical profiles of temperature, salinity and dissolved oxygen, water masses in the study area were divided into 4 major groups, such as WM (water mass)-I, WM-II, WM-III, WM-IV. Their characteristics were similar to Tsushima Surface Water (TSW), Tsushima Middle Water (TMW), North Korea Cold Water (NKCW) and East Sea Proper Water (ESPW), respectively. In the vertical profiles of dissolved nutrients, dissolved inorganic nitrogen (DIN) and dissolved inorganic phosphorus (DIP) concentrations were highest in the WM-IV, followed by WM-III, WM-II, WM-I. On the contrary, distribution of dissolved organic nitrogen (DON) and dissolved organic phosphorus (DOP) were highest in the WM-I, followed by WM-II, WM-III, WM-IV. Although the DIN : DIP ratio in all of the water masses was similar to Redfield ratio(16), the DIN : DIP ratio in mixed layer was about 5.3, indicating that inorganic nitrogen is the limiting factor for the growth of phytoplankton. However, the DON proportion in dissolved total nitrogen (DTN) was about 70% in the mixed layer where inorganic nitrogen is limiting factor. Thus, enriched DON may play an important source of the nutrient for the growth of phytoplankon in the East Sea.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.50-58
• /
• 2020

When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.277-284
• /
• 2011

In this study, UV-curing type organic - inorganic hybrid hard coating solutions were prepared from alumina sols and acrylate monomers. The mixture of alumina sols, prepared from aluminum isopropoxide, and a silane coupling agent, methacryloxypropyl trimethoxysilane(MPTMS), was used as an inorganic component. Also, the mixture of acrylate monomers, pentaerythritol triacrylate(PETA), 1,6-hexanediol diacrylate(HDDA) and dipentaerythritol hexaacrylate (DPEHA), was used as an organic component. The organic-inorganic hybrid coating solutions were obtained by mixing the inorganic component and organic component, deposited on polycarbonate substrates by spin coating and densified by UV-curing. The effect of the amount of MPTMS in the inorganic component and the irradiation time during UV-curing was studied on the properties of coating films. As a result, when 0.20 mole of MPTMS was used, the pencil hardness of coated films showed an excellent pencil hardness of 3H and also exhibited a good abrasion resistance of 2% in haze.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.630-638
• /
• 2021

In this study, we investigated the effects of dissolved inorganic and organic nutrient on the growth of dinoflagellate Alexandrium affine (LIMS-PS-2345). The maximum uptake rates (ρ_max) and half saturation constants (Ks) calculated from the uptake kinetics experiment were 77.0 pmol/cell/hr, 17.6 μM for nitrate and 15.5 pmol/cell/hr, 3.88 μM for phosphate, respectively. These results suggested that this species has high inorganic nutrient demand and a low affinity for inorganic nutrients. During the utilization of organic nutrients for A. affine, growth rates of experimental groups added by organic nitrogen (urea and glycine) and phosphorus (adenosine triphosphate and glycerol phosphate) were above 70 %, compared to the experimental groups added by inorganic nutrients. Thus, A. affine may need to utilize organic nutrients to understand the dominant strategy and advantageous position in the interspecific competition within low inorganic nutrient environments.

• Tribology and Lubricants
• /
• v.19 no.3
• /
• pp.159-166
• /
• 2003

This research for replacement of chlorine or sulfur based EP(extreme pressure) -additives which is restricted materials by environmental regulation. The subject of this study is as follows, 4-ball test and friction coefficient test were experimented in accordance with temperature and velocity, compounding with several organic or inorganic metallic elements. After 4-ball test, wear area of steel ball was analysed by SEM-EDX. As the analysis, organic and inorganic elements make a effect for extreme pressure lubricity. It is shown that the friction coefficient of lubricant which includes chlorine or sulfur additives, the scoring phenomenon is found accord-ing to temperature and the scuffing phenomenon at 200$^{\circ}C$. Applying to Na, P, S, Zn, Ca based on inorganic and organic elements, the result showed that friction coefficient is decreased more and more, as increasing temperature of lubricant. The additive based on S, Cl, P elements is effect far extreme pressure in the sample#1 and Na, P, S, Zn, Ca in sample #2. These elements are environmental contaminants and S, Cl based on EP additives which are very popular in domestic industry, when they are properly composed with non-chlorine based on additives and Na, P, S, Zn, Ca organic or inorganic elements. It is showed that lubricity and excellent anti-wear properties.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.100-108
• /
• 2016

In various industries, many researches studies have been done in using nano thin film fabrication technology. In the field of printed electronics, various electronic devices can be fabricated using a direct printing process of on multiple functional materials. It has the advantages of low prices, environment-friendly environmentally friendly, flexibleility, large scale, mass production produced, simple process and so on. In this study, a viable thin film fabrication technology has beenwas introduced using the surface acoustic wave mechanism for thin film deposition. Fabrication of thin films using organic, inorganic and composite of organic/inorganic materials have been were analyzed through the experimental research. In this experiment, organic material MEH:PPV, inorganic material ZnO and composite material MEH:PPV/ZnO have been depo sited as thin films.

• Journal of Korea Foundry Society
• /
• v.33 no.4
• /
• pp.147-156
• /
• 2013

The effects of core materials on the microstructure and mechanical properties of Al casting products have been investigated. The Al casting samples and cylinder head were fabricated by using organic and inorganic binder core respectively, and their microstructure and mechanical properties were evaluated. The Al casting samples fabricated by using inorganic core showed the better mechanical properties such as tensile strength and elongation than those of the Al casting samples fabricated by using organic core. That's because the Al casting samples contained small amount of pore defects and had fine microstructure compared with the Al casting samples fabricated by using organic core. Also, the use of inorganic core effectively reduced harmful gas emission and pollution.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.290-292
• /
• 2004

Multimode channel waveguides were fabricated using a direct UV patterning technology from thick films deposited by the one-step dip-coating of an organic/inorganic hybrid material (ORMOCER(equation omitted). The core size of the covered ridge waveguide was 43${\times}$51 $\mu\textrm{m}$$^2$; the waveguides can be readily prepared for multimode applications by direct UV patterning. The waveguides exhibited smooth surface profiles and a low optical loss of 0.07 ㏈/cm at the most important wavelength (850nm) used for optical interconnects.

• Journal of Biosystems Engineering
• /
• v.29 no.6 s.107
• /
• pp.508-514
• /
• 2004

This study was conducted to investigate the influences of aeration rates and temperatures on phosphorus transformation in the manure during treatment of swine manure in 15.3L batch reactor. The total phosphorus of raw manure was composed of $91.5\%$ of inorganic phosphorus and $8.5\%$ of organic phosphorus. During the experiment, inorganic phosphorus decreased from $91.5\%\;(385.7\;mg/L)\;to\;25.8-42.7\%\;(108.8-179.8\;mg/L)$ while organic phosphorus increased from $8.5\%\;(35.6\;mg/L)\;to\;57.3-74.2\%\;(241.5-312.5\;mg/L)$. The organic phosphorus was increased by the possible transformation of soluble inorganic phosphorus to poly-phosphate by the microbial uptake. However, soluble inorganic phosphorus was not decreased much during the experiment because the insoluble inorganic phosphorus was transferred to soluble inorganic phosphorus offsetting the microbial uptake. There was no significant difference in soluble inorganic proportion variance during the experiment among treatments for three liquid temperatures and three aeration levels. In terms of phosphorus transformation in the manure and energy consumption required for aeration, lower aeration was desirable fur the manure treatment.

• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.28-32
• /
• 2006

Diarylethene in photochromic materials was doped in organic-inorganic hybrid low-melting glasses were synthesized through a nonaqueous acid-base reaction process, which consists of network units including a small number of bridging oxides. The organic phase is a dichlorodimethylsilane while the inorganic phase is a tin(II) chloride. Diarylethene was incorporated into the glasses without any degradation of its functionality. The open form of diarylenthene, which is converted from the opening one upon UV-irradiation, is change to the closed form visible light-irradiation. The rate constant of the photochemical reaction is $31.78\times10^{-3}s^{-1}$ with 400 W UV lamp irradiation.