• KSBB Journal
• /
• v.14 no.4
• /
• pp.465-469
• /
• 1999

Horseradish peroxidase(HRP) in organic solvent can be reactivated by evaporation. In order to measure the evaporation effect, the enzyme solutions were obtained by evaporation and dilution of organic solvent, respectively. Although two situations were thermodynamically identical, the activity from evaporation was higher than that from dilution. From the UV absorbance and the fluorescence intensity mesurements, it can be explained that reactivation of enzyme activity might be caused by reversible folding, and the enzyme obtained by evaporation was more refolded than that obtained by dilution.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.932-937
• /
• 2004

In situ extraction by organic solvent was studied in order to improve the recovery yield of hydrocarbon from the culture of Botryococcus braunii, a green colonial microalga. When the solvent mixture of octanol as an extractive solvent and n-octane as a biocompatible solvent was added to a two-phase column, the algal growth was seriously inhibited, even at a low concentration of polar octanol. Therefore, a two-stage cell-recycle extraction process was proposed to improve the contact area between the organic phase and the aqueous phase. The hydrocarbon recovery with in situ cell-recycle extraction showed a three-fold increase (57% of cell) in yield over that with two-phase extraction. In addition, over 60% of the hydrocarbon could be recovered without serious cell damage by downstream separation when this process was applied to the culture broth after batch fermentation.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.712-715
• /
• 2001

A new combined method including the enzymatic hydrolysis of $\beta$-cyclodextrin ($\beta$-CD) and solvent extraction fo cholesterol from the hydrolyzed mixture was developed to recover cholesterol from a $\beta$-CD-cholesterol complex prepared from dairy products, such as cream, milk, and cheese. Cyclomaltodextrinase (cyclomatodextrin dextrin hydrolase, EC 3.2.1.54, DCase_ prepared form alkalophilic Bacillus sp. KJ 133 hydrolyzed the $\beta$-DC of the $\beta$-CD-cholesterol complex, and then, free cholesterol was efficiently extracted from the hydrolyzed mixture by a nonpolar solvent such as ethyl acetate. To increase the stability of free CDase, immobilized CDase was developed using sodium alginate as a carrier. The immobilized CDase showed a high recovery yield of cholesterol in a time-dependent manner compared to the free CDase. A gas chromatography analysis showed that more than 70% of cholesterol was recovered from the $\beta$-DC-cholesterol complex of cream by the immobilized CDase, whereas only 3% and 29% of cholesterol were recovered when the solvent extraction and free CDase treatment were used, respectively. The cholesterol recovered can be used as a raw material for steroid synthesis. Furthermore, this method can be an efficient way to recover cholesterol or other organic compounds that are bound in a $\beta$ -DC-cholesterol or -organic compound complex.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.466-470
• /
• 2014

In this paper, organic solvent electrolytes were prepared by a mixture of propylene carbonate (PC), dimethyl carbonate (DMC), tetraethylammonium tetrafluoroborate ($TEABF_4$)s to evaluate the ionic properties of propylene carbonate (PC)/dimethyl carbonate (DMC) mixtures as solvents for a capacitor application, in view of improving the electrochemical performances. The bulk resistance and interfacial resistance of the mixture electrolytes were investigated using an AC impedance method. The morphology of carbon-based electrodes which were contained in different electrolytes was analyzed by scanning electron microscopy (SEM) method. From the experimental results, by increasing the FEC content, capacitance of electrodes was increased, and the interfacial resistance was decreased. In particular, by a content of 2 vol % FEC in 0.2 M $TEABF_4$ PC/DMC solvent, the electrolyte showed the superior capacitance. However, when FEC content exceeds 2 vol %, the capacitance was decreased and the interfacial resistance was increased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.426-430
• /
• 2012

The properties of green sheet were investigated in order to understanding an effects of organic solvent mixture ratio for solid oxide fuel cells fabrication. The purpose of this work is to optimize the slurry condition using the design of experiment to improve green sheet properties. The elongation increased with increasing amount of binder and solvent. With increasing amount of solvent, the air permeability increased but the tensile strength decreased. The best properties of the green sheet appeared amount of the binder 17 wt%, solvent 35 wt% and powder 48 wt%. The optimum condition of green and sintered density for solid oxide fuel cells fabrication was obtained in the sample pressured at 800 $kgf/cm^2$.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.29-41
• /
• 2018

Separating a mixture having an azeotrope or low relative volatility with single distillation column is difficult. Separating water-acetic acid mixture and water-ethanol mixture with a distillation column consumes a lot of energy. Pervaporation membrane can be used to separate the mixture in the concentration region where separation is difficult with distillation. We simulated a distillation-membrane hybrid process where membrane is located on the head of the distillation column for efficient separation of water-acetic acid and water-ethanol mixture. Permeability data were obtained from experiments and literature. We formulated an optimization problem for the process with total annual cost (TAC) as an objective function and major design variables as optimization variables. Major optimization variable affecting TAC of the hybrid process was shown to be distillate concentration. We also suggested a simplified optimization procedure to get a close-to-optimal solution.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.99-102
• /
• 2000

To establish optimal conditions for esterification by Candida cylindracea, lipase reactions were performed simultaneously, separately, or individually in the varying initial rates of $0.014-0.060\mu$mole free fatty acids consumed min-1g-1. The reactants which were conditioned at aw of 0.12 gave the highest initial rate of esterifying $0.060\mu$mole free fatty acids consumed min-1g-1. These results suggest that the esterifying activity of lipase in an organic system depends on the transfer of available water within the reaction system.

• Clean Technology
• /
• v.22 no.3
• /
• pp.203-207
• /
• 2016

Here, we report a novel fabrication technique for patchable organic lasing sheet based on non-volatile liquid organic semiconductors and freestanding polymeric film with high flexibility and patchability. For this work, we have fabricated the second-order DFB grating structure, which leads to surface emission, embedded in the freestanding polymeric film. Using an ultra-violet (UV) curable polyurethaneacrylate (PUA) mixture, the periodic DFB grating structure can be easily prepared on the freestanding polymeric film via a simple UV curing process. Due to unsaturated acrylate remained in the PUA mixture after UV curing, the freestanding PUA film provides adhesive properties, which enable mounting of the patchable organic lasing sheet onto non-flat surfaces with conformal contact. To achieve laser actions in the freestanding resonator structure, a composite material of liquid 9-(2-ethylhexyl)carbazole (EHCz) and organic laser dyes was used as the laser medium. Since the degraded active materials can be easily refreshed by a simple injection of the liquid composite, such a non-volatile liquid organic semiconducting medium has degradation-free and recyclable characteristics in addition to other strong advantages including tunable optoelectronic responses, solvent-free processing, and ultimate mechanical flexibility and uniformity. Lasing properties of the patchable organic lasing sheet were also investigated after mounting onto non-flat surfaces, showing a mechanical tunability of laser emission under variable surface curvature. It is anticipated that these results will be applied to the development of various patchable optoelectronic applications for light-emitting displays, sensors and data communications.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.166-176
• /
• 1993

In order to investingate the renal dysfunction in workers exposed to aromatic organic solvents, 105 male exposed workers and 109 controls were participated in this study. This study was conducted to examine the correlation among the concentration of aromatic organic solvents in air, worker's urinary NAG activity and urinary hippuric acid. The results were as follows : 1. The exposure level of aromatic organic solvent mixture caculated by the equation proposed by ACGIH was ranged from 0.27 to 0.54 and toluene concentration was ranged from 18.3ppm to 48.3ppm. 2. NAG activity in the urine of control and exposed group were $36.1{\pm}14.2nmolMU/mg$ creatinine and $52.4{\pm}26.1nmolMU/mg$ creatinine, respectively. Hippuric acid concentration in the urine of control and exposed group were $191.1{\pm}194.2mg/g$ creatinine and $789.3{\pm}784.1mg/g$ creatinine, respectively. 3. Correlation coefficent between the exposure level of aromatic organic solvent mixture was significantly related to urinary NAG activity(r=0.542) and urinary hippuric acid(r=0.752). 4. Correlation coefficient between NAG activity and hippuric acid concentration was 0.357. This study suggested that urinary NAG activity was a good renal function index for aromatic organic solvents exposure and urinary hippuric acid was an index for the biological monitoring of toluene exposure.