• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.693-700
• /
• 1992

As an approach to study a new natural antioxidant for edible fats and oils, antioxidative fractions from acorn powder were characterized. The oxidative stabilities of soybean, palm, beef tallow, and lard oil containing the acorn active fraction extracted with various organic solvents were studied by determining the peroxide value during the storage at $60^{\circ}C.$ And this effective antioxidative components were isolated and identified by thin layer chromatography and high performance liquid chromatography. The proximate compositions of acorn powder were water 11.9~12.0%, protein 7.1~7.4%, starch 65.5~69.4%, fat 2.1~2.6%, fiber 2.1~3.6%, ash 2.4~2.6%, and total tannin 4.6~6.8%, respectively. The final yield of fraction extracted by sequential order of acetone : $H_2O$(1 : 1) and ethylacetate was 2.8~3.1%. Gallic acid, digallic acid and gallotannin were contained this final fraction. The main antioxidative activity was speculated due to the presence of gallic acid in acorn powder extract. The antioxidative activity was more effective in fat water emulsion than just fat system. Antioxidative activities measured by peroxide value were quite high in beef tallow and soybean emulsion, but low in lard and palm oil emulsion in the concentration of 200ppm acorn extract. Therefore, the addition of 200ppm acorn extract was suggested to expect effective antioxidation concentration in the reaction system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.2
• /
• pp.75-86
• /
• 2007

This process which has a connection of biofilter and sulfur-limestone has been developed to treat organic substances including BOD, COD and SS etc. and to treat sulfur-limestone is for denitrification.. The whole process consists of chemical reaction tank, sedimentation tank, trickling filter, denitrification tank The trickling filter is equipped with a reactor filled with absorptive filter, and the sulfur denitrification tank is filled with sulfur-limestone mixed media. After setting up practical facilities whose capacity is 60 tons a day, we have observed the removal efficiencies of pollutants through 60 experiments during Summer and Winter seasons. The average concentration of polluted water was BOD for 3.6 mg/L, $COD_{Mn}$ for 11.3 mg/L, SS for 2.8 mg/L, T-N for 8.6 mg/L, and T-P for 0.8 mg/L, and the rate of treatment efficiencies 96.5%, 84.7%, 96.5%, 79.2%, and 80.8%, respectively was found through the experiments. The average treatment efficiency for BOD and $COD_{Mn}$ was 85.0% and 55.7%, respectively and the average removal efficiency for NH4+-N was 84.9% in the trickling filter. The removal efficiency in the denitrification tank is as follows; The removal rate of $NO_3^--N$ was as high as 93.2% within the compass of pH 6.3 to 7.3 through $16.8{\sim}37.0mg/L$ flown into $NO_3^--N$ and $0.1{\sim}8.3mg/L$ outflown. It had observed that this process has implemented highly efficient and advanced treatment without external carbon sources and internal recycle during its process. In conclusion, this process is suitable for a sewerage in a small village due to the merits of low power consumption and easy maintenance.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.506-511
• /
• 2008

In this study sol-gel and combustion process was surveyed for the preparation of the red $Y_2O_3$: Eu phosphor, and the properties of phosphor was considered. Chelation and hydrolysis in amorphous citrate sol-gel process were completed in initial reaction stage, and water-forming condensation was superior to organic acid-forming condensation. The mole ratio of citric acid to metal ion had to be above to for the progress of sol-gel process. The dried gel powders are mostly amorphous, and crystallize completely at $700^{\circ}C$, and the crystallinity increases with increasing calcining temperature. The luminescence property of the phosphor was analyzed by measuring the emission spectra. The luminescence intensity increases when the calcination temperature and concentration of metal ions in solution increase.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.5
• /
• pp.107-115
• /
• 2002

This study was carried out to compare artificial soil formulated by blending calcined clay and coconut peat with perlite, then to evaluate this soil as a perlite substitute for use as an artificial planting medium. To achieve this, a determination of the physico-chemical properties and it's effect on plant growth were conducted by comparing those with large perlite grains and small grains. The results are summarized as follows: 1) The bulk density was 0.41g/㎤. This density was lower than that of field soil, but higher than that of large perlite grain(0.23g/㎤) and small grain(0.25g/㎤). The porosity, field capacity, and saturated hydraulic conductivity were 71.3%, 49.2%, and 3.8$\times$10-2cm/s, respectively. The air-permeability, water holding capacity, and drainage were better than or equal to that both large and small perlite grain. 2) It was near-neutral in reaction(pH=6.6). It had a high organic carbon content(65.8g/kg) and a low available phosphoric acid content(84.7mg/kg). It was similar to crop soil in cation exchange capacity(11.4cmol/kg). It had a low exchangeable calcium content(0.71cmol/kg), a low exchangeable magnesium content(0.68cmol/kg), a high exchangeable potassium content(2.54cmol/kg), and a high exchangeable sodium content(1.12cmol/kg). Except for the exchangeable potassium and sodium content, the chemical properties were better than or equal to both large and small grain perlite. The excessive exchangeable potassium or sodium content will inhibit plant growth. 3) In Experiment 1, the plant growth tended to be higher compared to that of large and small perlite gains. But in Experiment 2, it tended to be lower. This might be linked to the excessive exchangeable potassium or sodium content. 4) It could be considered as a renewable perlite substitute for greening of artificial soil. But, it would be necessary to leach the excessive exchangeable potassium or sodium to avoid the risk of inhibiting plant growth.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.415-420
• /
• 2011

Urethane coating agent was made up in order to prevent corrosion on metal relics. This urethane coating agent was designed to solve problems linked to gloss and discoloration caused by existing acrylic coating agent which is mainly applied to metal relics. For the purpose, the urethane coating agent was made up which has lower gloss and slight color change. This coating agent formed thinner coating layer with excellent adhesion compared to the existing agent and has outstanding resistance to the surface oxidization of metal relics and water repellent on the surface. In addition, the agent is considered a stable coating agent replacing current acrylic coating agent with showing easy dissolution in organic solvents such as acetone, toluene and xylene with excellent result in reversible reaction.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2097-2104
• /
• 2000

Naturally occurring taste and odor problems include those produced by microorganism. notably algae and bacteria. The major compounds causing taste and odor are MIB and Geosmin which can cause earthy-musty at very low concentration 9ng/L and 4ng/L, respectively. Especially, the problem is very serious from summer to fall in source and finished water. It is well known that using PAC is one of the best technology to control these compounds in drinking water treatment. In this study, optimum dosage and dosing time of PAC were observed with the adsorption isotherm experiments in single and binary compounds. Also, the effect of natural organic matter(NOM) was investigated by using a natural water with JSW. The adsorption capacity of Geosmin was higher than MIB in both with NOM and without NOM. The adsorption capacity of Geosmin and MIB was 4 times lower with NOM than that of without NOM. which was caused by competition adsorption. When the initial concentration of Geosmin and MIB were 100ng/L in JSW, at least 4 hours of reaction time was needed to achieve 99% removal with 20mg/L of the PAC.

• Journal of Environmental Science International
• /
• v.19 no.8
• /
• pp.951-960
• /
• 2010

Sediment works as a resource for electric cells. This paper was designed in order to verify how sediment cells work with anodic material such as metal and carbon fiber. As known quite well, sediment under sea, rivers or streams provides a furbished environment for generating electrons via some electron transfer mechanism within specific microbial population or corrosive oxidation on the metal surfaces in the presence of oxygen or water molecules. We experimented with one type of sediment cell using different anodic material so as to attain prolonged, maximum electric power. Iron, Zinc, aluminum, copper, zinc/copper, and graphite felt were tested for anodes. Also, combined type of anodes-metal embedded in the graphite fiber matrix-was experimented for better performances. The results show that the combined type of anodes exhibited sustainable electricity production for ca. 600 h with max. $0.57\;W/m^2$ Al/Graphite. Meanwhile, graphite-only electrodes produced max. $0.11\;W/m^2$ along with quite stationary electric output, and for a zinc electrode, in which the electricity generated was not stable with time, therefore resulting in relatively sharp drop in that after 100 h or so, the maximum power density was $0.64\;W/m^2$. It was observed that the corrosive reaction rates in the metal electrodes might be varied, so that strength and stability in the electric performances(voltage and current density) could be affected by them. In addition to that, COD(chemical oxygen demand) of the sediment of the cell system was reduced by 17.5~36.7% in 600 h, which implied that the organic matter in the sediment would be partially converted into non-COD substances, that is, would suggest a way for decontamination of the aged, anaerobic sediment as well. The pH reduction for all electrodes could be a sign of organic acid production due to complicated chemical changes in the sediment.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.422-427
• /
• 2003

Rhodopseudomonas palustris P4 can produce $H_2$ either from CO by water-gas shift reaction or from various sugars by anaerobic fermentation. Fermentative $H_2$ production by P4 is fast, but its yield is relatively low due to the formation of various organic acids. In order to increase $H_2$ production yield from glucose, P4 was investigated for the photo-fermentation of acetate which is a major by-product of fermentative $H_2$ production. Experiments were performed in batch modes using both light-grown and dark-grown cells. When the dark-grown P4 was challenged with light and acetate, $H_2$ was produced with the consumption of acetate after a lag period of 25 h. $H_2$ production was inhibited when a nitrogen source, especially ammonium, is present. When the dark-fermentation broth containing acetate was adopted for photo-fermentation with light-grown cells, $H_2$ production and concomitant acetate consumption occurred without a lag period. The $H_2$ yield was estimated as 2.4 - 2.8 mol $H_2/mol$ acetate and the specific $H_2$ production rate was as 9.8 ml $H_2/g$ cell${\cdot}$h, The fact that a single strain can perform both dark- and light-fermentation gives a great advantage in process development Compared to a one-step dark-fermentation, the combined dark- and light-fermentation can increase the $H_2$ production yield on glucose by two-fold.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.3
• /
• pp.231-237
• /
• 2004

Ga-MFI was synthesized by a hydrothermal process at atmospheric pressure. The effect of mole ratios of reactants on crystallization was also investigated thoroughly. The characteristics of synthesized Ga-MFI was compared with ZSM-5. The synthesis of Ga-MFI was carried out with five different mole-compositions of $\underline{a}SiO_2-\underline{b}Ga_2O_3-\underline{c}Na_2O-\underline{d}TPA_2o-\underline{e}H_2O$. The synthesized Ga-MFI and ZSM-5 were characterized by XRD and FT-IR. The inorganic cation ($Na^+$) and water played an important role in crystallinity and the organic cation ($TPA^+$) as a template played a great influence on yields. With the increase in the amount of $Ga^{3+}$, crystallization time was increased. With a fixed $SiO_2/Ga_2O_3$ ratio of 400, the optimum reaction condition was obtained at $H_2O/SiO_2$=30${\sim}$35, $Na_2O/SiO_2$=0.5${\sim}$0.6, and $TPA_2O/Na_2O$=1${\sim}$1.25. In these cases, the crystallinity and yield were more than 95% and 90%, respectively. By comparing IR spectrum of Ga-MFI with those of ZSM-5 and silicalite, it was found that Ga-MFI showed a unique peak at 970 $cm^{-1}$, which may be used to identify Ga-MFI from ZSM-5 and silicalite.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.3
• /
• pp.212-220
• /
• 2015

The engineering plastic of sulfonated polyether ether ketone (SPEEK) as a polymer matrix has been developed in this lab to replace Nafion, solid polymer electrolytes of perfluorosulfonic acid membrane which has several flaws such as high cost, and limited operational temperature above $80^{\circ}C$. The SPEEK was prepared in the sulfonation reaction of polyether ether ketone (PEEK). The organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted tungstosilicic acid (Cs-TSiA) with cross-linking agent contents of 0.01 mL. In conclusion, CL-SPEEK/Cs-TSiA/ceria 1% membrane showed the optimum results such as 0.1882 S/cm of proton conductivity at $80^{\circ}C$, and 99.61 MPa of tensile strength which were better than Nafion 117 membrane.