• The Korean Journal of Malacology
• /
• v.3 no.1
• /
• pp.3-14
• /
• 1987

The electrophoretic and innunological cnalyses of organic matrices in the shells of freshwater bivalves were made in order to dlucidate the biochemical characteristics and species-specific differinces of the applied shells, The water-soluble and insoluble matrices of four species of freshwater bivalves, Andodonta fukudai, Unio douglasiae, Lanceolaria and Chrbicula fluminea, were used as analytical materials, There was non-identity in immuno affinity between anti soluble matrix(anti-Sm) and anti insoluble matrix(anti-ISM)sera against the organic matrix of Andodnta fukudai. The SMs of four species (S. fukudai, U.douglasiae, L. acrorhyncha, and C. fluminea) showed the differences in the precipitate arcs at the level of family, though ISMs did mot show differences. In the electrophoretic analysis, all foru species had two SDS-electrophoretic bands of SM, of which molecular wights appeared to be lower than 55,000, shereas the native organic matrices of foru speceis had higher molecular weighrs than those from SDS-dldctrophoresis. Only calcium ion among many ions in extrapallial fluid(EPF) caused SM to change into insoluble molecules, thus the EPF pretreated with Ca++did not form the precipitate arc when did the immuno diffusion whth anti SM serum. ISM precursor may be polymerized into macromolecules like periostracin, a precusor of periostracum, judging from the similat polymerization patterns in 0.1M Tris formate buffer(pH 3); they may be made insoluble macromolecules due to their strong natrue of hydrophobicity.

• Journal of the Optical Society of Korea
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2006

Optical transparency and high diffraction efficiency are two essential factors for high performance of the photopolymer. Optical transparency mainly depends on the miscibility between polymer binder and photopolymerized polymer, while diffraction efficiency depends on the refractive index modulation between polymer binder and photopolymerized polymer. For most of organic materials, the large refractive index difference between two polymers accompanies large structural difference that leads to the poor miscibility and thus poor optical quality via light scattering. Therefore, it is difficult to design a high-performance photopolymer satisfying both requirements. In this work, first, we prepared a new phase-stable photopolymer (PMMA) with large refractive index modulation and investigated the optical properties. Our photopolymer is based on modified poly (methyl methacrylate) as a polymer binder, acryl amide as a photopolymerizable monomer, triethanolamine as initiator, and yellow eosin as a photosensitizer at 532 nm. Diffraction efficiency over 85% and optical transmittance over 90% were obtained for the photopolymer. Second, Organic-inorganic nanocomposite films were prepared by dispersing an aromatic methacrylic monomer and a photo- initiator in organic-inorganic hybrid sol-gel matrices. The film properties could be controlled by optimizing the content of an organically modified silica precursor (TSPEG) in the sol-gel matrices. The photopolymer film modified with the organic chain (TSPEG) showed high diffraction efficiency (> 90%) under an optimized condition. High diffraction efficiency could be ascribed to the fast diffusion and efficient polymerization of monomers under interference light to generate refractive index modulation. The TSPEG modified photopolymer film could be successfully used for holographic memory.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.460-465
• /
• 2013

Plate-shaped inorganic particles are coated onto a stainless steel substrate by the electrophoretic deposition of a precursor slurry which includes the inorganic particles of $Al_2O_3$ and polymer resin in mixed solvents to mimic the abalone shell structure, which is a composite of plate-shaped inorganic particles and organic interlayer binding materials with a layered orientation. The process parameters of the electrophoretic deposition include the voltage, coating time, and conductivity of the substrate. In addition, the suspension parameters are the particle size, concentration, viscosity, conductivity, and stability. We prepared an organic-inorganic composite coating with a high inorganic solid content by arraying the plate-shaped $Al_2O_3$ particles and electrophoretic resin via an electrophoretic deposition method. We analyzed the effect of the slurry composition and the electrophoretic deposition process parameters on the physical, mechanical and thermal properties of the coating layer, i.e., the thickness, density, particle orientation, Young's modulus and thermogravimetric analysis results.

• Korean Journal of Materials Research
• /
• v.18 no.2
• /
• pp.98-102
• /
• 2008

The ferroelectric properties of UV irradiated and non-irradiated PZT films prepared via photochemical metal-organic deposition using photosensitive precursors were characterized. Fourier transform infrared spectroscopy showed that complete removal of organic groups was possible through UV exposure of the spin-coated PZT precursor films at room temperature. The measured remnant polarization values of UV-irradiated and non-irradiated PZT films after annealing at $650^{\circ}C$ were 29 and $23\;{\mu}C/cm^2$, respectively. The UV irradiation was found to be effective for the enhancement of the <111> growth orientation and ferroelectric property of PZT film and in the direct patterning in the fabrication of micro-patterned systems without dry etching.

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.75-75
• /
• 2006

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.449-450
• /
• 1999

VOCs(volatile organic compounds)는 대기중에서 질소산화물과 함께 광화학반응에 참여하여 인체 및 동식물에 유해한 오존 등 2차 오염물질인 광화학산화물을 형성하는 전구물질로 작용한다. 1998년 8월 미국 EPA에서는 휘발성유기화합물과 지표 부근의 오존 또는 스모그의 발생량을 감소시키기 위해 페인트, 세제 및 살충제의 제조공법에 관한 새로운 규칙을 발표하여 휘발성 용제 사용 규제를 강호하고 있다(과학기술부, 1998).(중략)

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.86-86
• /
• 2002

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1193-1194
• /
• 2006

The magnetic ferrite nanoparticles were synthesized and coated by silica precursor in controlling the coating thicknesses and sizeses. The surface modification was performed with amino-functionalized organic silanes on silica coated magnetic nanoparticles. The use of functionalized self-assembled magnetic ferrite nanoparticles for nucleic acid separation process give a lot of advantages rather than the conventional silica based process.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.2059-2062
• /
• 2012

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.363-363
• /
• 2014

Ruthenium (Ru) has attractive material properties due to its promising characteristics such as a low resistivity ($7.1{\mu}{\Omega}{\cdot}cm$ in the bulk), a high work function of 4.7 eV, and feasibility for the dry etch process. These properties make Ru films appropriate for various applications in the state-of-art semiconductor device technologies. Thus, it has been widely investigated as an electrode for capacitor in the dynamic random access memory (DRAM), a metal gate for metal-oxide semiconductor field effect transistor (MOSFET), and a seed layer for Cu metallization. Due to the continuous shrinkage of microelectronic devices, better deposition processes for Ru thin films are critically required with excellent step coverages in high aspect ratio (AR) structures. In these respects, atomic layer deposition (ALD) is a viable solution for preparing Ru thin films because it enables atomic-scale control of the film thickness with excellent conformality. A recent investigation reported that the nucleation of ALD-Ru film was enhanced considerably by using a zero-valent metallorganic precursor, compared to the utilization of precursors with higher metal valences. In this study, we will present our research results on the synthesis and characterization of novel ruthenium complexes. The ruthenium compounds were easy synthesized by the reaction of ruthenium halide with appropriate organic ligands in protic solvent, and characterized by NMR, elemental analysis and thermogravimetric analysis. The molecular structures of the complexes were studied by single crystal diffraction. ALD of Ru film was demonstrated using the new Ru metallorganic precursor and O2 as the Ru source and reactant, respectively, at the deposition temperatures of $300-350^{\circ}C$. Self-limited reaction behavior was observed as increasing Ru precursor and O2 pulse time, suggesting that newly developed Ru precursor is applicable for ALD process. Detailed discussions on the chemical and structural properties of Ru thin films as well as its growth behavior using new Ru precursor will be also presented.