본 연구에서는 고도정수처리를 위하여 모듈 내부와 세라믹 정밀여과막 외부 사이의 공간에 입상 활성탄(GAC)을 충전한 혼성 모듈을 이용하였으며, 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 사용하였다. GAC의 충전율(packing fraction)에 따른 처리효율의 변화를 알아보고자. GAC의 충전율을 $0{\sim}24.05%$로 변화 시켰다. 그 결과, 3시간 운전하는 동안 막오염에 의한 저항($R_f$) 및 투과선속(J)의 변화 곡선은 GAC의 충전율에 관계없이 거의 중첩되었다. 그리고 탁도의 처리효율은 모든 조건에서 99.46% 이상으로 높았으며, $UV_{254}$ 흡광도로 측정한 NOM의 처리효율은 최대 충전율 24.05%에서 제거율은 99.43%로 가장 높게 나타났다. 한편, 충전율 24.05%에서 13시간 동안 운전한 결과, J는 막오염의 증가에 따라 운전 초기 1시간 이내에 급격히 감소하였으며 3시간 운전 후부터는 거의 일정한 투과선속을 나타냈다. 그리고 탁도 및 NOM의 처리효율은 각각 99.52%와 96.63%로 안정적인 높은 처리효율을 보였다.
Poly(ether-block-amide)(PEBA, $PEBAX^{TM}$)는 열가소성 탄성체(thermoplastic elastomer, TCU)로서 hard-rigid amide block과 soft-flexible ether block으로 구성되어 있으며, 분자량과 두 block간의 구성비에 따라 여러 종류가 있다. $PEBAX^{TM}$는 분리막소재로 이용할 경우, $PEBAX^{TM}$의 hard amide block은 우수한 기계적 특성과 선택도를, 그리고 soft ether block은 높은 투과도를 제공할 수 있다. 따라서 본 연구에서는 2종류의 $PEBAX^{TM}$를 사용하여 기체분리막을 제조하고, 종류에 따른 이산화탄소와 메탄의 투과특성 변화를 연구하였다. 또한 순수 $PEBAX^{TM}$ 분리막의 투과특성을 향상시키기 위해 무기전구체로서 TEOS(tetraethoxysilane)를 사용하여 $PEBAX^{TM}$/TEOS 하이브리드막을 제조하고, 그 투과특성을 순수 $PEBAX^{TM}$ 분리막의 결과와 비교하였다. 순수 $PEBAX^{TM}$-1657과 $PEBAX^{TM}$-2533 분리막의 투과도 측정 결과, ether block의 비율이 상대적으로 높은 $PEBAX^{TM}$-2533 분리막의 투과도 계수가 보다 높은 투과도 계수값을 가졌다. 이는 $PEBAX^{TM}$-2533의 경우, 상대적으로 높은 ether block 함량 때문에 고분자 사슬의 유연성이 보다 크기 때문으로 볼 수 있다. $PEBAX^{TM}$/TEOS 하이브리드 분리막의 투과특성을 순수 $PEBAX^{TM}$ 분리막의 결과와 비교할 때, 하이브리드 분리막의 기체 투과도 계수가 보다 높음을 알 수 있다. 이는 TEOS의 축합반응으로 생성된 silica domain에 의해 결정성이 감소하고 또한 이산화탄소와 silanol group과의 친화도(affinity) 증가에 따른 용해도가 증가하기 때문으로 볼 수 있다. 하이브리드 분리막의 투과도 계수 증가에도 불구하고 이상분리인자는 거의 비슷하거나 약간 감소하였음을 알 수 있다. 이는 이산화탄소와 silanol group의 친화도 증가로 인한 용해선택도의 증가에 기인한 것으로 볼 수 있다.
최근 20년간 다양한 종류의 심미 수복재가 개발되었고, 특히 지난 5년 동안에는 그 수에 있어서 극적인 증가추세를 보였다. 최근 들어, ormocer라는 새로운 종류의 광중합형 수복재료가 소개되었는데, 화학 분야에서는 이미 오래 전부터 알려져 있던 성분으로, 광학렌즈 등의 표면경화제로 이용되어 오다가 최근 치과용 수복재에 도입되었다. 'Ormocer' 란 'Organically Modified Ceramics'의 약자로 'Ormosils' (Organically Modified Silicates)로도 알려져 있다. 그러나, 이 새로운 수복재에 대한 연구는 아직 미흡한 실정이다. 본 연구에서는 서로 다른 계통의 광중합형 수복재들(Z-100, Surefil, Tetric Ceram, Dyract AP)과 ormocer(Admira)를 압축강도와 굴곡강도 측면에서 비교 평가하고, 구강내 환경과 유사한 조건에서 수분흡수가 그 물성에 미치는 영향을 평가할 목적으로 시도되어 다음과 같은 결과를 얻었다. 1. 1일 후에 측정한 Admira의 압축강도는 Surefil보다는 낮았으나, 다른 재료들과는 유의한 차이를 나타내지 않았다(p>0.05). 2. 1일 후에 측정한 Admira의 굴곡강도는 다른 4종의 재료에 비해서 낮았다(p<0.05). 2일부터는 3종의 복합레진에 비해서 낮았다(p<0.05). 3. 실험기간(30일) 중 hybrid composite resin군(Z-100, Tetric Ceram)과 packable resin(Surefil)군 간에는 압축강도와 굴곡강도에서 유의한 차이가 없었다(p>0.05). 4. 실험에 사용된 5종의 수복재 모두 압축강도와 굴곡강도가 2일까지 증가하다가 7일부터 감소하였다(p<0.05). 5. 각 재료의 시간에 따른 압축강도와 굴곡강도의 변화양상은 통계적으로 유사하였다(p>0.05).
In order to improve flame retardancy, the halogen free organic melamine phosphate(M-P) flame retardant was synthesized from melamine and phosphoric acid by the reaction of precipitation. The ignition test was carried out preparing hybrid flame retardant compound($H_bFRC$) consisting of organic M-P and inorganic Mg$(OH)_2$ as a flame retardant in the polyolefin resins. The flame retardancy and mechanical properties of flame retardant aluminum composite panel($H_bFRC$-ACP) were performed to investigate the possibility of the composite material, which was contained M-P, as a inner core for $H_bFRC$-ACP. For this study, the results of ignition test indicate that a char formation and drip suppressing effect, and combustion time reduced as the content of M-P increased. The limited oxygen index(LOI) values were measured 17.4vol% and 31.5vol% for LDPE only and $H_bFRC$-3(M-P content: 15wt%), respectively. And it was verified that the $H_bFRC$-3 was needed more oxygen quantity with the increase of M-P content when it combustion. Also, the results from thermogravimetric analysis were observed endothermic peak at $350^{\circ}C$ and $550^{\circ}C$, it was confirmed predominant thermal stability though the wide temperature range by the mixture of M-P and Mg$(OH)_2$. The LDPE-ACP (using only LDPE as a inner core), $35.13kW/m^2$ of heat release rate(HRR) and 13.43MJ/m2 of total heat release(THR) were measured while the $H_bFRC$-ACP, $10.44kW/m^2$ of HRR and 1.84MJ/m2 of THR were measured by results of cone calorimeter test. In case of $H_bFRC$-ACP, the average gas emission amount of CO and $CO_2$ could be decreased down to 25% and 20%, respectively, in comparison with LDPE-ACP. The mechanical properties such as tensile strength, bending strength and adhesion strength of $H_bFRC$-ACP were revealed slightly high values $54N/mm^2$, $152N/mm^2$ and 120N/25mm, respectively, compared with LDPE-ACP. It was confirmed that flame retardancy was improved with the synergy effect because of char formation by M-P and hydrolysis by Mg$(OH)_2$. The result of this study suggest that $H_bFRC$ can be applied for an adequate halogen free flame retardant composite material as a inner core for ACP.
본 논문에서는 UIO-66에 항체 기능성을 도입한 유무기 하이브리드 소재를 합성하고 이를 표면 플라즈몬 공명(surface plasmon resonance, SPR) 분석법에 접목하여 옥시토신과 같은 작은 분자를 검출하는 감도를 향상시키고자 하였다. 옥시토신은 암, 알츠하이머, 심부전증 진단에 중요한 생물학적 표지 펩타이드 분자로 알려져 있으며, 이를 수 펨토몰(femtomole, fM) 농도 수준까지 검출하기 위해 다공성이며 표면적이 우수한 metal organic frameworks 중 하나인 UiO-66-(COOH)2 소재를 신호증폭용으로 활용하면서 옥시토신에 특이적인 항체 페어를 이용하는 표면 샌드위치 분석법을 개발함으로써 선택성을 향상시키고자 하였다. 이를 위해 먼저 선정한 각 옥시토신 특이적 항체가 옥시토신에 대해 강하게 결합하는지 그리고 각 항체가 옥시토신의 서로 다른 결합사이트에 결합하는지를 실시간 SPR 분석법으로 확인하였다. 선정한 항체 중 한 개(예: anti-OXT [OTI5G4])를 SPR용 금 박막 칩 표면에 고정하고, 옥시토신을 흘려준 후, UiO-66-(COOH)2에 컨쥬게이션된 다른 항체(예: anti-OXT[4G11])를 순차적으로 흘려주어 표면에 샌드위치 복합체(anti-OXT[OTI5G4]/옥시토신/UiO-66-(COOH)2-anti-OXT[4G11])를 형성하였을 때 옥시토신 농도에 따라 SPR 신호가 변화하는 것을 실시간으로 모니터링하였다. 그 결과, UiO-66-(COOH)2를 사용하지 않았을 때 대비 약 백만 배 이상 감도를 증폭시켜 약 10 fM까지 검출 가능함을 보여주었다.
Eighteen lambs were used to determine the effects of zinc (Zn) level and source on Zn status and immune function during both normal conditions and conditions of physiologic stress. Treatments consisted of a basal diet (27.6 mg of Zn/kg), and the basal diet supplemented with 25 mg of Zn/kg, added as either zinc oxide or zinc methionine. The basal diet was a corn-cottonseed hull-isolated soy protein- based diet (14% CP). Lambs were weighed and blood samples taken at 28-d intervals for determination of serum Zn and alkaline phosphatase activity. Weights and serum Zn were similar (p > 0.10) among treatments at all sampling days. To evaluate immune responses and Zn status during conditions of physiologic stress lambs were administered 100 I.U. of adrenocorticotrophin (ACTH) on d 112 and feed was withheld for 48 h. Cortisol levels were elevated (p < .01) 5 h post ACTH injection, but had returned to initial levels after 48 h. Lymphocyte blastogenesis ([$^3H$]-thymidine incorporation) on d 112 (prior to ACTH injection) and 114 was unaffected (p > .10) by dietary treatment. However, blastogenesis in response to pokeweed mitogen was greater (p < .0001), whereas the response to phytohemagglutinin was reduced (p < .01) following ACTH administration and fasting. Antibody response to administration of porcine red blood cells was unaffected (p > .05) by dietary treatment. These results indicate that, given the Zn concentration of the basal diet, there was no enhancement of immune function by supplemental Zn, either before or after lambs were subjected to stress.
Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.
Light-emitting chromophores have been separated from silica spheres modified the surface with 3-(trimethoxysilyl)propylmethacrylate (TMSPM). The photoluminescence characteristics of the chromophores were investigated with various excitation wavelengths. The TMSPM was attached to the surface of silica spheres at $75^{\circ}C$. Large number of round shaped particles of the TMSPM was on the surface of silica spheres after 3 h reaction. The TMPSM was completely covered on the surface of the spheres after 6 h reaction. The surface modified silica spheres were soaked into acetone and stored for 20 days at ambient condition. The solution color slowly changed from light yellow to deep yellow with the increase of the storing time. The FTIR absorption peaks at 3348, 2869, 2927, 1715, 1453/1377, 1296, and $1120cm^{-1}$ represent C-OH, $R-CH_3$, $R_2-CH_2$, -C=O, C-H, C=C-H, and Si-O-Si absorption, respectively. The FTIR absorption peak at $1715cm^{-1}$ representing the ester -C=O stretching vibration for silica spheres stored for 20 days was increased compared with the spheres without aging. The UV-visible absorption peaks were at 4.51 eV (275 nm) and 3.91 eV (317 nm). There were two luminescence peaks at 2.51 eV (495 nm) and 2.25 eV (550 nm). The emission at 2.51 eV was dominant peak when the excitation energy was higher than 2.58 eV, and emission at 2.25 eV became dominant peak when the excitation energy was lower than 2.58 eV.
본 연구에서는 생체재료 표면개질의 방법으로 유-무기 박막 형성에 관한 방법을 연구하였다. Collagen의 분해 시 얻어진 gelatin을 polystyrene 배양접시에 2 h 동안 흡착시켜 gelatin 흡착층을 형성하였다. Gelatin 흡착중에 calcium과 phosphorus 과포화 이온용액을 주입하여 calcium phosphate (CaP) 박막을 제조하였다. 박막 형성 초기에 박막의 핵들이 나타나는 것을 관찰하였다. 처리시간에 따라 CaP 박막에 성장하여 배양접시의 바닥표면 전체에 형성된 것을 볼 수 있었다. 형성된 gelatin/CaP 복합 박막의 특징은 3차원 공간에서 다공성이 높은 표면 구조를 형성하였다. Attenuated total reflectance Fourier transform infra-red spectroscopy (ATR-FTIR)을 이용하여 CaP 박막의 화학적 성질을 분석한 결과, 박막 형성 초기에는 무결정 형태의 박막이 형성되고, 시간이 경과됨에 따라 결정성이 약간 증가하지만, 결정성이 낮은 CaP에서 나타나는 흡수피크의 존재 등을 통하여 본 연구에서 제조한 CaP 박막은 poorly crystalline CaP 박막임을 확인하였다.
Zhou, Hao;Meyerhoff, Mark E.;Bi, Kai-Shun;Park, Sung-Bae
전기화학회지
/
제12권4호
/
pp.335-341
/
2009
Organic-inorganic hybrid sol-gel matrices were used as hosts for chloro (5, 10, 15, 20-tetraphenylporphyrinato) cobalt (III) (Co[TPP]Cl), a known ionophore for nitrite. The sol-gel precursor was prepared by the reaction of (3-isocyanopropyl) triethoxysilane with 1,4-butanediol. An appropriate amount of the anion-exchanger, tridodecylmethylammonium chloride (TDMAC) and the plasticizer, tributylphosphate (DBP) were used as membrane additives. On mixing with an acidic catalyst, the sol-state precursors slowly gelled, yielding a membrane in which the active components, Co[TPP]Cl and TDMAC, were encapsulated. The performances of the sol-gel membrane-based electrodes were compared to those of Co[TPP]Cl-based poly(vinyl chloride) (PVC) membrane electrodes. Membranes with a molar ratio of Co[TPP]Cl: TDMAC (1 : 0.1) showed reasonable response slopes toward nitrite. The response slopes were typically 53 mV/decade between $10^{-5.4}$ and $10^{-1.0}\;M$. Selectivities toward nitrite over hydrophilic and small anions such as chloride were somewhat inferior to those observed with PVC-based membranes, but selectivities over lipophilic anions were quite similar. Reduced asymmetry potentials due to protein adsorption were found to occur with the sol-gel matrix relative to PVC-based films when the sensors were employed as a detector in flow-through configuration.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.