• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.69-84
• /
• 2023

Despite the continuous installation and regular inspection of waste treatment facilities, complaints about excessive incineration and illegal dumping stench continue to occur at on-site treatment facilities. In addition, field surveys were conducted on the waste treatment facilities currently in operation (6 type) to understand the waste treatment process for each field, to grasp the main operating factors applied to the inspection. In addition, we calculated the material·energy balance for each main process and confirmed the proper operation of the waste disposal facility. As a result of the site survey, in the case of heat treatment facilities such as incineration, cement kilns, and incineration heat recovery facilities, the main factors are maintenance of the temperature of the incinerator required for incineration and treatment of the generated air pollutants, and in the case of landfill facilities Retaining wall stability, closed landfill leachate and emission control emerged as major factors. In the case of sterilization and crushing facilities, the most important factor is whether or not sterilization is possible (apobacterium inspection).In the case of food distribution waste treatment facilities, retention time and odor control during fermentation (digestion, decomposed) are major factors. Calculation results of material balance and energy resin for each waste treatment facility In the case of incineration facilities, it was confirmed that the amount of flooring materials generated is about 14 % and the amount of scattering materials is about 3 % of the amount of waste input, and that the facility is being operated properly. In addition, among foodwaste facilities, in the case of an anaerobic digestion facility, the amount of biogas generated relative to the amount of inflow is about 17 %, and the biogas conversion efficiency is about 81 %, in the case of composting facility, about 11 % composting of the inflow waste was produced, and it was comfirmend that all were properly operated. As a result, in order to improve the inspection method for waste treatment facilities, it is necessary not only to accumulate quantitative standards for detailed inspection methods, but also to collect operational data for one year at the time of regular inspections of each facility, Grasping the flow and judging whether or not the treatment facility is properly operated. It is then determined that the operation and management efficiency of the treatment facility will increase.

• 월간산업보건
• /
• s.8
• /
• pp.4-30
• /
• 1988

Examination of working environments was conducted to get more detailed data about harmful working environments and to make a contribution to more effective management. Study was carried out on 722 factories located in Taegu city and eight counties in Kyungpook Province, Korea, for a period of one year, from February 1 to December 30, 1986. The total number and proportion of workers exposed to harmful material was 37,697, 45.2% among 83,368 workers. The results according to exposed material were as follows: 1. In the case of noise, proportion of exceeding the 8-hour TLV was 59%, Included were nail-cutting in assembly metal manufacturing industry and weaving process in textile. 2. Dust in mill process of coal manufacturing industries exceeded the TLV of second class of dust at all parts and exceeded the TLV at 6% as a whole.: 3. The fields of industry lower than 70 lux of illumination were storage equipment of food, auto-winder of textile, painting of wood wares and coal mixing, and 44% of all cases was lower than standard. 4. As a result of temperature index investigation(WBGT), about 12% of all sujects exceeded limit value. Included parts were rolling machine and reducing room. 5. In the case of organic solvents, TLV was exceeded at about 8%, The parts exceeded TLV according to materials belonged to this category were as follows. 1) Toluene: adhesive work in assembly metal manufacturing 2) Xylene: printing and paint mixing in chemical manufacturing 3) Methyl ethytl ketone: paint mixing in all parts examined and coating machine partially in chemical manufacturing 4) Methyl isobutyl ketone: printing in chemical manufacturing 5) Acetone: vapor polishing in assembly metal manufacturing 6. Among specified chemical materials, the concentration of HC1 in the air in metal assembly manufacturing factory exceeded TLV. in one of three assembly metal manufacturing examined. Others, such as benzene, acetic acid, formic acid, sodium hydroxide, formalin, ammonia, copper, chromate etc. were lower than TLV in its indoor atmospheric concentration. As a whole, the proportion of exceeding TLV was about 0.8% 7. The concentrations of inorganic lead were lower than TLV in all parts examined. The results of this investigation show the fact that current management of working environments is not satisfactory, and so more active management is needed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.647-651
• /
• 2013

Animal manure compost is a commonly used fertilizer in organic vegetable and fruit production in Korea. However, livestock manure compost produced from animal feces can contain a lot of the non-pathogenic and pathogenic bacteria. Of particular concern are bacteria causing human food-borne illness such as Escherichia coli O157:H7 and Listeria monocytogenes. The objective of this study was to investigate effect of temperature on survival of E. coli O157:H7 and L. monocytogenes in livestock manure compost. Commercial livestock manure compost (manure 60%, sawdust 40%) was inoculated with E. coli O157:H7 and L. monocytogenes. Compost was incubated at four different temperatures (10, 25, 35, and $55^{\circ}C$) for 20 weeks. Samples were taken every week during incubation depending on the given conditions. E. coli O157:H7 persisted for up to 1 day in livestock manure compost at $55^{\circ}C$, over 140 days at $10^{\circ}C$, 140 days at $25^{\circ}C$, and 120 days at $35^{\circ}C$, respectively. L. monocytogenes persisted for up to 1 day in livestock manure compost at $55^{\circ}C$ and 140 days at $10^{\circ}C$, 70 days at $25^{\circ}C$, and 40 days at $35^{\circ}C$, respectively. The results indicated that E. coli O157:H7 and L. monocytogenes persisted longer under low temperature condition. E. coli O157:H7 survived longer than L. monocytogenes at three different temperatures (10, 25, and $35^{\circ}C$). The results are being used to develop guidelines on the management of manure to reduce the risks of E. coli O157:H7 and L. monocytogenes transmission to foods produced in the presence of animal waste.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1389-1402
• /
• 2013

This paper focuses on the impacts of waste dumping on inorganic nutrients in the dumping area of the Yellow Sea, and the effect of an governmental regulation of pollution in dumping areas. The environmental variables and parameters of the dumping and reference areas in the Yellow Sea were measured during July 2009 and analyzed. In addition, the analyzed data for inorganic nutrients over the last 10 years were obtained from the Korea Coast Guard (KCG) and the National Fisheries Research and Development Institute (NFRDI). The chemical environment of the study area revealed increases in concentrations of inorganic nutrients, Chemical Oxygen Demand (COD), and Volatile Suspended Solids (VSS) in the bottom layer. On the contrary, the pH level was decreased. Most notably, the time series data of inorganic nutrients showed gradual increase over time in the dumping area, and thus, the oligotrophic waters trend toward eutrophic waters. The increases appears to be due to the disposal of large amounts of organic waste. In recent times, the wastes disposed at the area were largely comprised of livestock wastewater, and food processing waste water. The liquefied waste, which contains an abundance of nutrients, causes a sharp increase in concentrations of inorganic nitrogen in the dumping area. On the one hand, the dumping sites have been deteriorated to such an extent that pollution has become a social problem. Consequentially, the government had a regulatory policy for improvement of marine environmental since 2007 in the dumping area. Hence, the quality of marine water in the dumping site has improved.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.268-272
• /
• 2003

Experiments were carried out to investigate the selection of industrial medium and optimization of fermentation process for the production of erythritol by Candida magnoliae SR101. In the batch fermentation, light steep water(LSW) was the best nitrogen source for the industrial production of erythritol. For the optimization of culture condition, the batch culture was performed. When the concentration of LSW was 65 mL/L in the defined medium containing 250 g/L of glucose, 44% of erythritol yield with 110 g/L of erythritol concentration and 0.66 g/L-hr of productivity, respectively were obtained. Two-stage fed-batch culture was performed to improve the volumetric productivity of erythritol. High density cell culture in the growth stage was performed by batch type with 100 g/L glucose and 500 mL/L LSW concentration, respectively. The cell yield was 0.72 g-cell/g-glucose. Productivity of erythritol was increased and concentration of organic acids such as gluconic acid and acetic acid were decreased when initial pH of 6.5 controlled by 28% ammonia water For increasing yield of erythritol, glucose concentration in the production stage was tested. 37% of total erythritol yield with 186 g/L of erythritol concentration and 1.66 g/L-hr of erythritol productivity were obtained when 820 g of glucose powder was directly added for making up 450 g/L of glucose at production stage.

• Particle and aerosol research
• /
• v.7 no.3
• /
• pp.71-77
• /
• 2011

Pork belly meat and mackerel are popular meals in Korea. Although a lot of people enjoy cooking these food, there have been some reports that generated organic particles during cooking could be thereas on of lung cancer of nonsmoking housewives. In addition, some experiments show that carcinogens may be included in meat and fishes which we eat usually. For this reason, particle size and concentration in formation during cooking are necessary to figure out the relationship between particles and the diseases. Thus, we identify number concentrations and size distributions of generated nano aerosol in cooking with respect to time, hood operation, and distance between cooking and measurement locations. The maximum concentrations of nano aerosol(diameter sizes are between 10 to 700nm)are decreased after the cooking from $8{\times}10^6{\sharp}/cm^3$ to zeroth order in pork belly meat cooking, and from $3.5{\times}{\times}10^6{\sharp}/cm^3$ to zeroth order in mackerel cooking respectively. When it comes to hood operation during cooking, the detected concentrations of generated aerosols are decreased as in taking flow rate of the hood increases. In cooking pork belly meat, the reduced amount of concentration is about $3{\times}10^6{\sharp}/cm^3$ compared to no hood operation, when hood in taking flow rate is $610m^3/hr$ In mackerel cooking, reduced concentration is $6{\times}10^5{\sharp}/cm^3$ in the same condition. Also, Naphthalene and Fluorene, which are known as polycyclic aromatic hydrocarbons (PAHs), are detected in the generated aerosols during cooking.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.403-407
• /
• 2008

Recently, Candida antarctica lipase B (CalB) draws attention from industries for various applications for food, detergent, fine chemical, and biodiesel, because of its characteristics as an efficient biocatalyst. Since many industrial processes carry out in organic solvent and at high temperature, CalB, which is stable under harsh condition, is in demand from many industries. In order to reform CalB promptly, the expression system which has advantages of ease to use and low cost for gene libraries screening was developed using E. coli. The E. coli strains, Rosettagami with competence for enhanced disulfide bond formation, Novablue, and $DH5{\alpha}$, were exploited in this study. To obtain the soluble CalB, the pCold I vector expressing the cloned gene at $15^{\circ}C$ and the chaperone plasmids containing groES/groEL, groES/groEL/tig, tig, dnaK/dnaJ/grpE, and dnaK/dnaJ/grpE/groES/groEL were used for coexpression of CalB and chaperones. The colonies expressing functional lipase were selected by employing the halo plate containing 1% tributyrin, and the CalB expression was confirmed by SDS-PAGE. E. coli Rosettagami and $DH5{\alpha}$ harbouring groES/groEL chaperones were able to express soluble CalB effectively. From a facilitative point of view, E. coli $DH5{\alpha}$ is more suitable for further mutation study.

• Journal of Science Education
• /
• v.35 no.2
• /
• pp.204-220
• /
• 2011

This study was intended to develop an experimental module based on inquiry processes conducted by photosynthesis scientists. It was aimed to enhance scientific inquiry ability of the middle school students by applying the developed module. Developed module included some experiments conducted by earlier photosynthesis scientists such as Helmont, Woodward, Priestly, Hales and Ingen-Hausz. Inquiry process was involved in the developed module for instructing the inquiry methods. Rapid-cycling Brassica rapa known as a Fast Plant was used for the experimental material. Developed module was applied to the experimental group consisting 27 eighth grader, while experiments suggested in the science textbook was applied to the control group consisting 30 eighth grader. Developed module was more effective in improving students' scientific inquiry ability, especially measuring, forecasting and hypothesizing ability as its subordinate elements. When the result of post-test was compared to one of pre-test in the experimental group, their observing, forecasting, and generalization ability were improved. Experimental group showed that students' conception in photosynthesis and conceptual development related with the role of plants in the ecosystem and plant's food and movement of the water and nutrients were also improved. Before application, students in the experimental group did not have enough understanding of the abstract concept such as the existence or the role of the materials like $CO_2$ or $O_2$ or the energy accumulation. Developed module could help students to achieve the comprehensive concept regarding the role of plants as producers of organic matter and oxygen and to enhance their scientific inquiry ability and concepts regarding photosynthesis.

• Horticultural Science & Technology
• /
• v.17 no.1
• /
• pp.11-14
• /
• 1999

This experiment was conducted to estimate seasonal changes in the properties and chemical components of xylem sap from 'Hayward' (Actinidia chinensis Planch) and wild kiwifruit species (Actinidia aguta Sieb. et Zucc. Planch) in 1996 and 1997. Amount of bleeding sap from kiwifruit vines considerably decreased with collection time in both species. There was no difference in water content, soluble solid content, viscosity, and pH of the sap between 'Hayward' and wild species, while turbidity and organic acid contents were much higher in 'Hayward'. Fructose content was highest among free sugars, followed by glucose, sucrose, galactose and manitol in 'Hayward', but only low concentration of fructose and glucose was detected in wild species. The major inorganic components in the sap were calcium, potassium, and magnesium, and calcium was dominant among them. The saps of 'Hayward' and wild species were composed of 17 kinds of amino acids respectively, and major amino acids were glutamic acid, lysine, and isoleucine. Glutamic acid content was highest in both species and except histidine, contents of methionine and tyrosine were much higher in 'Hayward' than wild species. Concentrations of inorganic elements and amino acids were slightly increased with delaying collection time, but sugar contents decreased.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.285-290
• /
• 2003

This study was conducted to select the bacteriocin-producing microoreanism cultivated in the rice bran culture and to characterize the produced bacteriocin for the further purpose of economical and anti-bacterial rice bran protein film. Pseudomonas putida 21025 was cultivated from rice bran and identified as a producer of a bacteriocin which showed bactericidal activity against Pseudomonas aeruginosa 9027. Bacteriocin produced by Pseudomonas putida 21025 showed a broad spectrum of activity against spoilage and soil bacteria. The activity of the bacteriocin produced by Pseudomonas putida 21025 decreased after 1 hr of staying at the temperature of $50^{\circ}C$, and with the presence of some organic solvents, except hexane and ethanol. However, the bacteriocin activity was stable throughout the pH ranges of 6-9 for 2 hrs, at the temperature lower than $50^{\circ}C$, and with the presence of ethanol for 3 hrs. The bacteriocin was partially purified by 50% ammonium sulfate precipitation followed by subsequent dialysis. Direct detection of the partially purified bacteriocin on SDS-PAGE suggested that it had an apparent molecular mass of about 21.6 kDa.