• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2333-2336
• /
• 2010

$TiO_2$ thin films were synthesized on carbon fibers using chemical vapor deposition. We show that these films can exhibit extraordinarily high absorption capacities of toluene vapor. Such an absorption phenomenon of toluene at room temperature was not found for other $TiO_2$ samples. Upon toluene absorption change in the color (darkening) of the film was found, indicating that these films can be used as an indicator of the existence of volatile organic compounds in the indoor environments. By X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM), a high concentration of OH species and a unique layered structure were found for the $TiO_2$ films and these could be related to their high absorption capacity of toluene.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.518-520
• /
• 1997

Recently, thiophene oligomer with short chain lengths has received much attention as model compounds for facilitating better understanding of electronic and optical properties of polymers, because oligomer is well-defined chemical systems and its conjugation chain length can be exactly controlled. Moreover, organic this films based on conjugated thiophene oligomer have potential for application to electronic and optoelectronic devices such as MISFETs(metal-insulator-semiconductor field-effect transistors) and LEDs(light-emitting diodes). However, there is little knowledge on electronic and structural properties of linear-conjugated oligothiophenes in solid states, compared with those in solutions. $\alpha$-sexithienyl($\alpha$-6T) thin-films were deposited by OMBD(Organic Molecular Beam Deposition) technique, where the $\alpha$-6T was synthesized and purified by the sublimation method. The $\alpha$-6T films were deposited under various conditions. The effects of deposition rate, substrate temperature, and vacuum pressure on the formation of these films have been studied. The molecules in the $\alpha$-6T film deposited at a low deposition rate under a high vacuum were aligned almost perpendicular to the substrate. The $\alpha$-6T films deposited at an elevated substrate temperature showed higher conductivity than the film deposited at room temperature. Electrical characterization of these films will be also executed by using four-point probe measurement technique.

• Current Photovoltaic Research
• /
• v.4 no.2
• /
• pp.48-53
• /
• 2016

We report the effect of physical load on the stability of organic solar cells under physical loads. The active layers in organic solar cells were fabricated with bulk heterojunction films (BHJ) films of poly (3-hexylthiophene) and phenyl-$C_{61}$-butyric methyl ester. The loading time was varied up to 60 s by keeping the physical load constant. Results showed that the open circuit voltage was not influenced by the physical load but other solar cell parameters were sensitive to the loading time. The fill factor was very slightly increased at 15 s, while short circuit current density was well kept for 30 s. The power conversion efficiency was reasonably maintained for 45 s but became significantly decreased by the continuous loading for 60 s.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.63-63
• /
• 2011

In this tutorial session, the field of organic photovoltaic (OPV) cells based on small molecular weight materials will be presented. The previously reported studies on the fabrication, structure, and property of the cells as well as the molecular materials are included. Especially, the factors hampering further enhancement in the power conversion efficiency of the cells such as exciton recombination, light absorption and interfacial morphology between electron donor and acceptor layer will be discussed in detail. The recent progress in our group will also be presented. It includes typical materials and cell fabrication techniques we used as well as the studies on improving the light absorption in the electron donor layer and reducing the extinction of excitons formed by introducing the nanostructured interface between organic layers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.415-418
• /
• 1998

The maleate copolyrner($C_{18}MA-VE_2$) is used as sensitive materials and deposited on the slide-glass substrates at room temperature using Langmuir-Blodgett(LB) method. The results of current-time(1-t) measurements are performed to investigate the gas-detection characteristics of the sensitive LB films in the presence of organic gases just as chloroform, acetone, ethanol, methanol using the apparatus for the gas-detection measurement. Several interesting responses are observed at room temperature, such as reversible response, sensitivity and response time. Response time and sensitivities are evaluated 160~220[sec], minimum 6[times], maximum 70[times] for each organic gas by adsorption and penetration of the organic gases in the relation concentration of 100[%], respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.164-168
• /
• 2005

We report high performance poly (3-hexylthiophene) organic field-effect transistors fabricated on a plastic substrate. The polymer active channel layer was directly printed by the rubber stamp printing method with a pre-patterned elastomer stamp. As a result. organic transistors having average field-effect mobility of 0.079 $cm^2/Vs$ and on/off ratio of $10^4{\sim}10^5$ were realized on a plastic substrate. Also, through the investigation of the molecular ordering of rubber-stamp-printed poly (3-hexylthiophene) films using synchrotron grazing-incidence X-ray diffraction measurements, the films were found to have edge-on structure which is favorable in realizing high performance organic transistors.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.124-125
• /
• 2012

Korea institute of materials science (KIMS) use a linear deposition source called as a closed drift linear plasma source (CDLPS) as well as dual magnetron sputtering (DMS) to deposit SiOxCyHz films in $HMDSO/O_2$ plasma. The CDLPS generates linear plasma using closed drifting electrons and can reduce device degradations due to energetic ion bombardments on organic devices such as organic photovoltaic and organic light emission diode by controlling an ion energy. The deposited films are investigated by Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). Optical emission spectroscopy (OES) is used to measure relative radical populations of dissociation and recombination products such as H, CH, and CO in plasma. And SiOx film is applied to a barrier film on organic photovoltaic devices.

• Preventive Nutrition and Food Science
• /
• v.6 no.4
• /
• pp.247-252
• /
• 2001

The need to determine the permeability of organic vapors to polymeric films such as aromas, flavors, etc. has significantly increased in the food industry because of preservation and safety issues along with migration problems. However, due to the complex nature of the permeation process, there have been few investigations compared to nonorganic compounds. In this paper, we review the history of permeability studies and typical methods of permeability measurement such as the isostatic method and quasi-isostatic method for organic vapors. New instrumental developments and significant findings are also introduced and discussed.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.365-365
• /
• 2006

The wavelength dispersion of birefringence (or retardation) is very important property for optical use of polymer films. Birefringence free film and retardation film have been widely used for applications such as liquid crystal display (LCD). In this study, miscible polymer blends which consist of polymers of positive and negative birefringence were found. By operating composition and orientation of molecules in the transparent blend films, the behavior of wavelength dispersion of birefringence (retardation) was controlled. The applicability to wideband birefringence free film and quarter wave (retardation) film was discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.17-22
• /
• 2005

Organic-inorganic hybrid type thin films are the next generation candidates as low-k materials. SiOC films are analyzed the bonding structure by the red and blue chemical shift using the fourier transform infraredspectra. Conventional chemical shift of organic chemistry is a red shift, but hybrid type SiOC films were observed the red and blue shift. The chemical shift originates from the interaction between the C-H bond and high electronegative atoms, and the blue shift in SiOC films is caused by the porosity due to the increase of the electron rich group such as much methyl radicals. The bonding structures of SiOC films are also divided into the Si-O-C cross-link structure and the Si-O-C cage-link structure due to the chemical shifts. The Si-O-C cross-link structure progressed the adhesion attributed to the C-H bond elongation in the reason of the red shift, and the dielectric constant also decreases.