• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.166-169
• /
• 2000

The Organic Electroluminescence (OEL) device, that was consisted of ALq3(8-hydroxyquinoline aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine), has been used. We investigated characteristics of brightness and current density about OEL that was oxidated each layers. We used two samples that were fabricated each continuous and non-continuous method. Emission was observed above 10mA/$\textrm{cm}^2$ and luminance was measured to be 1530cd/$\textrm{cm}^2$ at a current density of 100mA/$\textrm{cm}^2$. A luminance of over 2600cd/$\textrm{cm}^2$ was also observed after the final fabrication process.

• Prospectives of Industrial Chemistry
• /
• v.22 no.3
• /
• pp.1-5
• /
• 2019

차세대 디스플레이 소자로서 상용화된 유기발광소자(OLED)는 현재 진공기반의 증착공정을 통해서 제작되므로 제조공정 비용이 높다. 진공 증착공정을 용액공정으로 교체하면 공정 비용을 크게 절감할 수 있지만, 용액공정으로 다층 박막 구조를 형성하기 어렵다는 문제점이 있다. 다층 구조를 제작할 때 이미 형성된 하부 박막 위에 새로 형성되는 박막이 하부 박막에 영향을 주기 때문이다. 이를 해결하기 위한 방법으로서 용액 공정용 잉크 용매의 내용제성을 증가시켜 상부 박막을 코팅할 때 하부 박막이 용해되거나 손상을 입지 않도록 하는 가교형 소재를 이용한 방법이 있다. 본 원고에서는 OLED 소자를 용액공정으로 제작하기 위한 가교형 정공 수송 재료의 특징과 개발 현황에 대해 소개하고자 한다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.53-56
• /
• 2002

Today, interest in electroluminescent(EL) diodes has been increasing since vacuum-sublimed thin-film dioes exhibited high performance. And since the discovery of electroluminescence from aluminaqinone, which has uniform $\pi$-conjugated segment by Eastmann kodack,$^1$ lots of attentions have been concentrated on organic EL devices. However, they have disadvantage such as low mechanical intensity, thermic crystallization. (omitted)

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1358-1360
• /
• 1998

In this paper, organic thin film LED(light emitting diode) having ITO glass/$Alq_3$/Al structure using an $Alq_3$ was fabricated by the vacuum evaporation and the absorbance, wave length, 1-V characteristics were investigated. Electroluminescence of green and wavelength of 510[nm] were observed in this device. We observed absorbance form 320[nm] to 430[nm] and knew unstability of $Alq_3$ material as light emitting device.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.195-198
• /
• 1998

${\pi}-conjugated$ poly(arylene)s exhibit interesting electrochemical, optical, and electric properties, and various studies have been made on the chemical and physical properties of the poly(arylene)s. Poly(p-phenylene)(PPP) is a well-known highly conductive and highly stable organic material and is the subject of great interest in electronic device applications. (omitted)

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.264-265
• /
• 2001

영상표시방법은 관례적인 CRT 방법에 더하여 LCD, TFT-LCD, FED, PDP 등 다양한 방법들이 개발되었거나 개발되고 있다. 유기발광소자(OLED)를 이용한 영상표시법도 최근 그 실용성이 크게 향상된 방법으로 이 OLED를 이용하는 발광소자는 LCD, TFT-LCD 등의 방법과 마찬가지로 다층박막구조를 가지므로 각 박막층의 특성과 계면 급준성 등을 정확하게 평가하는 것은 긴요하다 하겠다. (중략)

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.175-195
• /
• 2008

Recent years have brought remarkable developments in white light emitting devices (WLEDs) and white organic light-emitting devices (WOLEDs). However, their efficiency, CIE values, CRI and lifetime are still not ideal. This review covers detailed discussion about syntheses of organometallic complexes, inorganic phosphors and quantum dots used in WLEDs, WOLEDs and their electroluminescent properties until December 2007.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.975-978
• /
• 2001

A novel poly[9,10-diphenylanthracene-4',4"-ylenevinylene-3,6-(N-2-ethyl hexyl)carbazole] containing alternate diphenylanthracene and carbazole unit was synthesized by the Wittig reaction. The obtained polymer was soluble in common organic solvents and thermally stable up to 380 $^{\circ}C.$ The polymer gives rise to bright blue fluorescence both in solution and in thin solid films. The light emitted from the device (ITO/polymer/Al) was greenish-blue in color and clearly visible in daylight.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1429-1432
• /
• 2007

We fabricated white organic light emitting diodes(WOLED) having two complementary and three primary colors with emission layers of DPVBi / MADN : DCM2-0.5% and DPVBi / $Alq_3$ / MADN : DCM2-1.5%, respectively. WOLED using three primary colors shows broad electroluminescence including green emission peak at 510nm while optical properties of the two complementary WOLED was higher current efficiency of 6.2 cd/A than 4.9 cd/A of three primary color WOLED. The maximum luminescence of WOLED with two complimentary color was $15200cd/m^2$ along with luminous efficiency 6.2cd/A, as achieving stable white color coordinates for both of WOLEDs at (0.33 , 0.33) almost.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.285-295
• /
• 1999

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of their capability of multi-color emission, and low operation voltage. An approach to realize such device characteristics is to use active layers of lanthanide complexes with their inherent extremely sharp emission bands in stead of commonly known organic dyes. In general, organic molecular compounds show emission due to their $\pi$-$\pi*$ transitions resulting in luminescence bandwidths of about 80 to 100nm. Spin statistic estimations lead to an internal quantum efficiency of dye-based EL devices limited to 25%. On the contrary, the fluorescence of lanthanide complexes is based on an intramolecular energy transfer from the triplet of the organic ligand to the 4f energy states of the ion. Therefore, theoretical internal quantum efficiency is principally not limited. In this study, Powders of TPD, $Eu(TTA)_3(phen) and AlQ_3$ in a boat were subsequently heated to their sublimation temperatures to obtain the growth rates of 0.2~0.3nm/s. Organic electrolumnescent devices(OELD) with a structure of $glass substrate/ITO/Eu(TTA)_3(phen)/AI, glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AI and glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AIQ_3AI$ structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, $Eu(TTA)_3(phen)$ as an emitting material, and Tris(8-hydroxyquinoline)Aluminum$(AlQ_3)$ as an electron transporting layer. Electroluminescent(EL) and current density-voltage(J-V) characteristics of these OELDs with various thickness of $Eu(TTA)_3(phen)$ layer were investigated. The triple-layer structure devices show the red EL spectrum at the wavelength of 613nm, which is almost the same as the photoluminescent(PL) spectrum of $Eu(TTA)_3(phen)$.It was found from the J-V characteristics of these devices that the current density is not dependent on the applied field, but on the electric field.