• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.919-924
• /
• 2014

Ambient ionization can be achieved by generating an electrospray directly from plant tissue ("leaf spray"). The resulting mass spectra are characteristic of ionizable phytochemicals in the plant material. By subtracting the leaf spray spectra recorded from the petals of two hibiscus species H. moscheutos and H. syriacus one gains rapid access to the metabolites that differ most in the two petals. One such compound was identified as the sambubioside of quercitin (or delphinidin) while others are known flavones. Major interest centered on a $C_{19}H_{29}NO_5$ compound that occurs only in the large H. moscheutos bloom. Attempts were made to characterize this compound by mass spectrometry alone as a test of such an approach. This showed that the compound is an alkaloid, assigned to the polyhydroxylated pyrrolidine class, and bound via a $C_3$ hydrocarbon unit to a monoterpene.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.212-218
• /
• 2008

Inorganic ion exchange compounds (IECs) including hydrotalcites and bentonite clays are a well known classes of layered mixed metal hydroxides or silicates that demonstrate ion exchange properties. These compounds have a range of applications from water purification to catalyst supports. The use of synthetic versions of these compounds as environmentally friendly additives to paints for storage and release of inhibitors is a new and emerging application. In this paper, the general concept of storage and release of inhibiting ions from IEC-based particulate pigments added to organic coatings is presented. The unique aspects of the IEC structure and the ion exchange phenomenon that form the basis of the storage and release characteristic are illustrated in two examples comprising an anion exchanging hydrotalcite compound and a cation exchanging bentonite compound. Examples of the levels of corrosion protection imparted by use of these types of pigments in organic coatings applied to aluminum alloy substrates is shown. How corrosion inhibition translates to corrosion protection during accelerated exposure testing by organic coatings containing these compounds is also presented.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.170-173
• /
• 1963

A tri-thiocyanate molybdenum (Ⅴ) complex containing pyridine has been prepared by one step process; namely, the solvent extraction of molybdenum (Ⅴ)-thiocyanate complex into organic solvents followed by precipitation of the compound by addition of pyridine to the extract. It is concluded that the compound has a definite composition regardless of the various mole ratios of molybdenum to thiocyanate ion employed in the preparation. The use of hydrazine as the reducing agent eliminates the necessity of working under inert atmosphere and of further purification of the product. Molybdenum (Ⅴ)-thiocyanate (1:3) complex can be quantitatively and selectively extracted with slightly polar organic solvents such as ethyl acetate, and the pyridine complex is quantitatively obtained due to the insolubility of the compound in them. The oxidation state of molybdenum in the compound is + 5 and the formula appears to be $MoH_2O_2(NCS)_3Py_2$ from the contents of Mo and NCS in the compound. The solubility of the compound in various has been studied at $25^{\circ}C$.

• Clean Technology
• /
• v.23 no.4
• /
• pp.378-387
• /
• 2017

To obtain epoxy resin with permanently attached flame-retardant groups, phosphorus compound containing di-hydroxyl group [10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phospha phenanthrene-10-oxide, DOPO-HQ] and silicone compound containing di-hydroxyl group (polydimethylsiloxane, hydroxyl terminated, PDMS) were reacted with uncured epoxy prepolymer (diglycidyl ether of bisphenol A, DGEBA) and then cured using 4,4-diaminodiphenylmethane (DDM) as a crosslinking agent. The properties of the resulting epoxy materials were characterized using Fourier transform infrared (FTIR) spectrometer, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI) test/vertical burning test (UL 94-V test), tensile properties test and impact test. This study examined the effect of phosphorus/silicone compound contents on the thermal/mechanical properties and flame retardancy of cured epoxy resins containing phosphorus and silicone compounds. It was found that the thermal/mechanical properties of epoxy resins containing phosphorus and silicone components were higher than those of simple epoxy resin. The flame-retardancy (LOI: 29.9 ~ 31.8% and UL 94-V: V-0) of all samples containing phosphorus compound and phosphrous compound/silicone compound was found to be passed the flame-retardant requirements (LOI: > 30%, UL 94-V: V-0) of LOI and vertical burning tests. However, the flame-retardancy (LOI: 21.4% and UL 94-V: no rating) of simple epoxy resin was found to be failed the flame-retardant requirements.

• Environmental engineer
• /
• s.146
• /
• pp.42-43
• /
• 1998

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.37-41
• /
• 2013

In this work, we report the effect on the volatole organic compounds(VOCs) sensing properties of Copper phthalocyanine(CoPc) and Dilithium phthalocyanine(DiLiPc) thin films onto alumina substrates. Use evaporation method and the spin-coated method for sensing device. The materials of metallophthalocyanine macrocyclic compound solutions blended with N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4"-diamine and/or Poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] solutions. The influence of the blended in with metallophthalocyanine macrocyclic compounds on the resistance have been measured and analyzed in five different volatole organic compounds. The following results were obtained: The AFM 3D image of thin films deposited on metallophthalocyanine macrocyclic compound shows that the surfaces roughness were about CuPc 4.1~14.3 nm(7.5~8.1%), DiLiPc 10.3~22.2 nm(7.9~11.5%). The resistances decreases upon increasing the concentration of vapor organic compounds to CuPc and DiLiPc thin films. That thin films blended Copper phthalocyanine(CoPc) and Dilithium phthalocyanine(DiLiPc) with N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4"-diamine and/or Poly[2-methoxy--5-(2'-ethylhexyloxy)-1,4-phenylenevinylene]. The resistances of blended thin films with N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4"-diamine and/or Poly[2-methoxy--5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] decreases upon increasing the concentration of volatole organic compounds(VOCs) on DiLiPc than CuPc compound thin films.

• Journal of Environmental Science International
• /
• v.8 no.6
• /
• pp.699-704
• /
• 1999

The Photodegradation efficient of total organic compounds in the drinking water has been studied using the methods of photocatalytic reaction and laser beam irradation. The results are summarized as follows; 1. The photodegradation efficiency of total organic compounds shows as $50\%\;to\;80\%$ as within one hour and after this the efficiency is decreased slowly. 2. The photodegradation efficiency of total organic compounds shows as 65 to $90\%$ within 3.3min. when Nd : YAG beam is irradiated to the water layer. 3. An excellent observation of the organic compound removal efficiency gives revealed in that case of the longest wavelength of 532nm is irradiated among the three kinds of laser beam sources of 532nm, 355nm and 266nm. 4. The organic compound removal efficiency shows high in the case of UV beam irradiation in the thin layer of water. However the efficiency is not depended on the thickness of water layer severely. 5. The removal efficiency of the organic compounds in the direct irradiation shows higher than the indirect irradiation in the case of UV beam, but the efficiency is not depended on the direction of irradiation in the case of Nd : YAG beam irradiation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.92-98
• /
• 1988

With a purpose of finding out the effects of magnesium and boron enriched organic-compound fertilizer application on the dry matter yield, yield components and changes in the botanical composition on the hilly pasture, a field experiment was arranged with five different treatments as a randomized block design and lasted from September, 1984 to the end of growing season in 1986. The results obtained are summarized as follows : 1. As a early plant growth and development, winter hardiness, growth vigour and coverage of grasses at the plots with organic-compound fertilizer application were better comparing to single dressing. 2. Average dry matter yields for two years were shown significantly high due to increasing amount of fertilizer. This trend was same both single and organic-compound fertilizer. And dry matter yields with organic-compound fertilizer application of low (8, 693.1 kg/ha) and conventional level (12, 758.7 kg/ha) were appeared to increase by 10 and 15% than those of single dressing of Low (7, 930.6 kg/ha) and conventional level (11, 122.6 kg/ha), respectively. But it was not significant difference. 3. Dry matter yield of grasses was significantly gained by increasing amount of fertilizer. The yield of legumes at the plot without fertilization was significant higher comparing to fertilizing plots, but it was not different between low and conventional dressing levels. However, at the plots with organic-compound fertilizer application the yields of grasses were a little more increased by 8-14%, and legumes were much more gained by 26-29% than those of the same species groups with single dressing, but it was not significant between the different kinds of fertilizer in the same fertilizing level. 4. At the grassland management, the rate of legumes tended to dominate at the plot without fertilization gradually. On the other hand, the botanical compositions and the rates of grasses were much better maintained at the plots with fertilization. But the rates of legumes with organic-compound fertilizer application tended to increase a little more than those of single dressing gradually.

• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.126-132
• /
• 2022

Wood Plastic Composite(WPC) has been mostly used for outdoor purposes such as deck materials and trails so far. In this study, WPC panels with improved antibacterial properties, total volatile organic compound emissions (TVOC), and flame retardant were manufactured to use Wood Plastic Compound as interior materials for indoor use. WPC compound was prepared by mixing Chamaecyparis obtusa wood flour with high density polyethylene(HDPE). The prepared WPC compound exhibited excellent antibacterial and antifungal properties, and the total volatile organic compound emission(TVOC) was 0.062 mg/m2·h. The WPC panel(303mm×606mm×10mm) manufactured by a twin screw extruder with the manufactured compound achieved the flame retardant grade 2 standard of KS F 2271.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.87-91
• /
• 2010

For the discovery of new antivirals against Severe Acute Respiratory Syndrome-coronavirus (SARS-CoV), we prepared and evaluated several benzoquinoline compounds as its 3C-like protease (3CLpro) inhibitors. Based on the computer modeling study that each of the two rigid benzoquinolinone and N-phenoltetrazole moieties of the compound 1 is bound to the S1 and S2 sites, respectively, of the SARS protease by forming H-bonds and hydrophobic interactions, we designed and synthesized alkylated benzoquinolines at both the sites of the hydroxyl groups. We found that the compound 2a showed five times higher inhibiting activity against the 3CLpro compared to the compound 1.