• 제목/요약/키워드: Organic Pollutants

검색결과 792건 처리시간 0.027초

전기화학적 기법에 의한 미생물연료전지 내부저항 특성 파악 및 전력관리시스템 연계 전압 변화와 유기물 저감에 미치는 영향 (Identification of Internal Resistance of Microbial Fuel Cell by Electrochemical Technique and Its Effect on Voltage Change and Organic Matter Reduction Associated with Power Management System)

  • 장재경;박혜민;김태영;양윤석;여정진;강석원;백이;권진경
    • 대한의용생체공학회:의공학회지
    • /
    • 제39권5호
    • /
    • pp.220-228
    • /
    • 2018
  • The internal resistance of microbial fuel cell (MFC) using stainless steel skein for oxidizing electrode was investigated and the factors affecting the voltage generation were identified. We also investigated the effect of power management system (PMS) on the usability for MFC and the removal efficiency of organic pollutants. The performance of a stack microbial fuel cell connected with (PMS) or PMS+LED was analyzed by the voltage generation and organic matter reduction. The maximum power density of the unit cells was found to be $5.82W/m^3$ at $200{\Omega}$. The maximum current density was $47.53A/m^3$ without power overshoot even under $1{\Omega}$. The ohmic resistance ($R_s$) and the charge transfer resistance ($R_{ct}$) of the oxidation electrode using stainless steel skein electrode, were $0.56{\Omega}$ and $0.02{\Omega}$, respectively. However, the sum of internal resistance for reduction electrode using graphite felts loaded Pt/C catalyst was $6.64{\Omega}$. Also, in order to understand the internal resistance, the current interruption method was used by changing the external resistance as $50{\Omega}$, $300{\Omega}$, $5k{\Omega}$. It has been shown that the ohm resistance ($R_s$) decreased with the external resistance. In the case of a series-connected microbial fuel cell, the reversal phenomenon occurred even though two cells having the similar performance. However, the output of the PMS constantly remained for 20 hours even when voltage reversal occurred. Also the removal ability of organic pollutants (SCOD) was not reduced. As a result of this study, it was found that buffering effect for a certain period of time when the voltage reversal occurred during the operation of the microbial fuel cell did not have a serious effect on the energy loss or the operation of the microbial fuel cell.

유기성 폐기물과 알칼리 안정화제가 첨가된 연안 양식장 퇴적물 조비료의 영양성분 조성 (Nutritive Quality of the Crude Organic Fertilizer Produced with Coastal Aquaculture-Ground Bottom Sediments, Organic Wastes and Alkaline Stabilizers)

  • 김정배;강창근;이근섭;박정임;이필용
    • 한국환경과학회지
    • /
    • 제11권12호
    • /
    • pp.1291-1298
    • /
    • 2002
  • To utilize coastal aquaculture ground bottom sediment in which concentrations of harmful pollutants are low and organic content is high as an organic fertilizer alkaline stabilizers such as CaO, Oyster shell, Mg(OH)$_2$ were added to the bottom sediment organic additives of livestock or food wastes. Nutritive qualities of crude fertilizers were measured to examine effects of alkaline stabilizers and organic waste additions. The Mg(OH)$_2$-added crude fertilizer had significantly lower total carbon(T-C) and nitrogen(T-N) content, reflecting the dilution effect due to great amount of Mg(OH)$_2$ addition. However, the addition of oyster shell had no significant effect on the T-C and T-N content of the fertilizer. $P_2O_5$ and $K_2$O content was considerably higher in the mixed sample of aquaculture ground bottom sediments and livestock wastes than in the mixture of the sediments and food wastes, resulting from higher $P_2O_5$ and $K_2$O content in livestock wastes. Addition of Mg(OH)$_2$ increased the content of MgO In the crude fertilizer but significantly reduced the content of other nutritive elements such as $P_2O_5$, $K_2$O and CaO. Addition of oyster shell as an alkaline stabilizer seemed to have the advantage of saving time and expenses far dryness due to its role as a modulator of water content. Moreover, additions of effect Mg(OH)$_2$ decreased the concentrations of heavy metals in the fertilizer by the dilution while additions of oyster shell had no influence on heavy metal concentrations in the fertilizer.

미세기포를 이용한 역삼투 모듈 세정 효율 평가 (Evaluation of Cleaning Efficiency of Reverse Osmosis Module Using Micro-bubble)

  • 김동진;강신경;조하영;이재우;문일식
    • 멤브레인
    • /
    • 제27권1호
    • /
    • pp.104-107
    • /
    • 2017
  • 역삼투막 운영에 있어서 유기물 오염에 대한 문제들을 해결하기 위해 많은 연구를 하고 있다. 현재 가성소다(NaOH)를 사용하여 유기물 오염 제거를 하고 있다. 본 연구는 지속적인 막오염 증가 문제를 해결하기 위한 물리/화학적 세정 기법으로서 기존에 사용하던 가성소다와 Micro-bubble를 이용하여 유기물 오염 제거 실험을 수행되었다. 멤브레인 강제 오염을 위해 Humic acid sodium, Bovine serum albumin, Sodium alginate 약품을 사용하여 유기물 오염을 시켰다. 유기물 오염에 따른 Flux를 관찰하였고, 가성소다와 Micro-bubble를 이용한 유기물 오염 제거 실험은 가성소다로만 사용했을 때보다 향상된 것을 관찰했다.

북한 에너지 사용과 대기오염물질 배출 현황 (Energy Usage and Emissions of Air Pollutants in North Korea)

  • 김인선;이지이;김용표
    • 한국대기환경학회지
    • /
    • 제27권3호
    • /
    • pp.303-312
    • /
    • 2011
  • 북한은 심각한 에너지 공급난을 겪고 있다. 이는 주요 에너지원인 석탄의 생산량 한계와 부족한 원유도입량 때문이다. 그 결과 바이오매스에 대한 의존도가 높아졌다. 수력발전을 통한 전력 생산과 적은 에너지 사용량은 대기오염물질을 줄이는 데 기여하였다. 실제로 북한의 $SO_2$, $NO_2$ 배출량은 남한에 비하여 적다. 남한의 경우 에너지 사용량이 증가하지만, 대기오염물질배출량은 감소한다. 반면, 북한은 에너지 사용량과 대기오염물질배출량이 함께 감소한다. 에너지사용량에 따른 $SO_2$, $NO_2$ 배출량 또한 북한이 남한보다 많다. 따라서 북한은 대기오염물질 관리에 열악한 구조임을 알 수 있다. 특히, 이러한 특징은 평양과 서울을 기준으로 한 $SO_2$, $NO_2$ 농도에서도 확인된다. 북한은 심각한 대기오염문제를 발생시키는 바이오 매스를 상당량 사용하고 있다. 하지만, 이에 대한 정확한 자료가 부족하다. 그로 인하여 많은 양이 바이오매스에서 발생되는 CO의 신뢰성이 떨어진다. 바이오매스 연소는 CO뿐만 아니라 휘발성유기화합물과 유기탄소(OC), 원소상탄소(EC)와 $K^+$ 등의 입자상 성분도 다량 배출하는 것으로 알려져 있다(Lee and Kim, 2007). 이는 인체 위해성 관점에서도 중요하다. 특히 최근 수도권의 대기환경에 미치는 영향에서 생체소각의 영향이 상당히 큰 것으로 여러 연구결과에서 제시하고 있다(Kim, 2010). 따라서 남한 대기환경에 북한 대기오염물질이 미치는 영향에 대한 정량적인 연구와 함께 북한의 에너지 사용에 대한 정확한 자료가 필요하다.

간이이동법에 의한 폐아스콘 재생시 대기오염물의 배출분석에 대한 실험적 연구 (A Pilot Study on Emission Analysis of Air Pollutants Produced from Portable Recycling of Asphalt Concrete)

  • 이병규;김행아;정의량;;채포기;박경원
    • 한국환경과학회지
    • /
    • 제16권3호
    • /
    • pp.385-392
    • /
    • 2007
  • Currently, portable equipment for recycling of waste asphalt concrete (ASCON) has been used. However, any air pollution control devices are not attached in the simple portable one. Thus, a lot of air pollutants have been produced from recycling processes of waste ASCON which resulted from aging of paved roads or repavement of roads. This study deals with a preliminary result of concentration analysis of air pollutants obtained from a pilot and a real recycling processes of waste ASCON using simple portable recycling equipment. Air pollutants were taken from 4 steps of the pilot recycling process including an initial heating by liquid petroleum gas (LPG), intermediate heating and melting (H&M) process, final H&M process, and pavement processes using recycled ASCON at the recycling site. Also, air pollutants were taken front 4 steps of the real recycling processes including an initial H&M, final H&M and mixing, loading of recycled ASCON to dump trucks, and at the recycling site after leaving the loaded dump trucks for real pavement sites. The air pollutants measured in this study include volatile organic compounds (VOCs), aldehydes, particulate matter (PM: PM1, PM2.5, PM7, PM10, TSP (total suspended particulate)). The identified concentrations of VOCs increased with increasing time or degree for H&M of waste ASCON. In particular, very high concentrations of the VOCs at the status of complete melting, which is exposed to the air, of the waste ASCON just before paving tv the recycled ASCON at the recycling site. Also, considerable amount of VOCs were identified from the recycling equipment after the dump trucks leaded by recycled ASCON leaved the recycling site for the pavement sites. The relative level of formaldehyde exceeded 80% of the aldehydes Identified in the recycling processes. This is because the waste ASCON is exposed to direct flame of LPG during H&M processes. The PM concentrations measured in the winter recycling processes, such as the loading and rotation processes of waste ASCON into/in the recycling equipment for H&M, were much higher than those in the summer ones. In particular, the concentrations of coarse particles such as PM7 and PM10 during the winter recycling were very high as compared those during the summer one.

EFFECT OF ENGINE OIL ON EXHAUST EMISSIONS

  • Maxa, D.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.423-424
    • /
    • 2002
  • Amount of regulated emissions (CO, $NO_x$, HC), and emissions of some groups of organic substances (volatile hydrocarbons, polyaromatics, and aldehydes) were measured in the standard ECE 83 test on spark ignition engine of a passenger car. The influence of the engine oil composition (mineral or fully synthetic) was examined. For both engine oils, exhaust emissions were measured with fresh oil as well as used oil at the end of the oil drain interval. Unleaded petrol and CNG were used as fuels in all experiments performed. The main conclusion made from the tests is that polyaromatics is the only part of th ε exhaust emissions that was influenced with the nature of the engine oil. Effect on the other components of emissions (aldehydes and VOC) was negligible. Emissions of polyaromatics were almost twice higher for fresh mineral as for fresh fully synthetic oil. The amount of polyaromatics in the exhaust emissions increased slightly with mileage for fully synthetic and substantially more for mineral engine oil.

  • PDF

Synthesis and comparison of pure TiO2 and metal/non-metal doped TiO2 as a photocatalyst

  • Moon, Jiyeon;Lee, Kyusang;Kim, Seonmin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.370.1-370.1
    • /
    • 2016
  • Volatile organic compounds (VOCs) are considered hazardous air pollutants and these are emitted from building materials and household products. VOCs can cause global warming as well as human sickness, and even cancer. Photocatalysis provides a way of converting VOCs into harmless materials. Various researches have shown that $TiO_2$ is the most efficient photocatalysts due to its excellent activity. In this study, metal/non-metal doped $TiO_2$ particles are synthesized for the enhancement of the photocatalytic properties of pure $TiO_2$. By metal/non-metal doping, band gap energies of prepared samples were analyzed by UV/Visible spectrophotometer. The physical and chemical properties of synthesized powder were characterized by field emission scanning electron microscope, by BET for measuring their specific surface area, and by XRD for phase identification and particle size determination. Degradation ability for p-xylene was evaluated through monitoring the concentration in a closed chamber. Relation between their properties and decomposition abilities for VOC were evaluated based on the experimental results.

  • PDF

이탈리아 수자원의 당면문제와 새로운 보전방안 (Problems of Water Resources with New Measures for Conservation in Italy)

  • 조윤승
    • 환경위생공학
    • /
    • 제10권3호
    • /
    • pp.115-123
    • /
    • 1995
  • Most countries have problems regarding the quantity and quality of their fresh water resources, and many countries are suffering from the e(feces of pollution of their inland and coastal waters. Italy is one of the country in which water supply is extremely uneven, and there are wide areas where it represents a real emergencies during periods of drought. All the watershed's water resources, however, are subjected to considerable anthropogenic pressure such as organic load with heavy metals. The high values of organic materials are accounted for mainly by runoff and percolation waste water from urban and agricultural land extensively ma- nured with effluents (rom livestock farming, while high concentration of heavy metals are found in watersheds of national and interregional significance. More than 35% of the underground water bearing strata of certain basins are already contaminated by pollution boih industrial and agricultural pollutants. In these connection, the problems and new measures of water resources in Italy are overviewed.

  • PDF

도시 대기오염물중 다환방향족 탄화수소의 배출원 규명을 위한 화학물질 수지모델의 적용 (Application of chemical Mass Balance Model for the Source Apportionment of Polynuclear Aromatic Hydrocarbons in Urban Atmosphere)

  • 구자공;서영화
    • 한국대기환경학회지
    • /
    • 제8권4호
    • /
    • pp.229-239
    • /
    • 1992
  • A receptor model application was performed by using a chemical mass balance (CMB) model to identify and apportion the specific source of airborne organic pollutants, particularly polynuclear aromatic hydrocarbons (PAHs). Source profiles of PAHs produced from the combustion of fossil fuels for CMB modeling were prepared by measuring them in emission gases. The emission sources which were examineed for the development of PAH source profiles are a coal-fired furnace using Yontan, a bunker-C iol heating boiler, and gasoline-and diesel engine automobiles. The ambient concentrations of PAHs were determined at four sites in Daejon city in 1991 with a seasonal variation. Wintertime air samples contained more extractable organic matter than summertime samples. The results of CMB modeling were various depending on the sampling sites and seasons, but the emission from bunker-C oil heating boliers was the predominant factor to affect local air quality throughout the year.

  • PDF

순환골재와 천연제올라이트 피복에 의한 연안퇴적물 오염물질 용출 차단 효과 (Effects of Capping with Recycled Aggregates and Natural Zeolite on Inhibition of Contaminants Release from Marine Sediment)

  • 김영기;신우석
    • 한국물환경학회지
    • /
    • 제32권6호
    • /
    • pp.546-551
    • /
    • 2016
  • In this study, capping with recycled aggregate and natural zeolite in marine sediment was performed to investigate its inhibitory effect on pollutants released from sediment to seawater. An experiment was performed by capping with amendments for 60 days, and concentrations of organic matter (COD), nitrate, phosphate and metallic elements (Ni, Zn, Cu, Pb, Cd, As, and Cr) were measured. Two capping materials effectively suppressed pollutant release. Recycled aggregate showed better effectiveness for organic pollutant, nitrate and phosphate release. Meanwhile, natural zeolite was effective for metallic elements. As a result, recycled aggregate and natural zeolite can be considered as cost-effective/inexpensive capping material candidates. Also, the capping material can be selected according to the target pollutant.