• Korean journal of applied entomology
• /
• 제58권2호
• /
• pp.159-164
• /
• 2019

The purpose of this study was to investigate whether leaf damage in pear orchards caused by large black chafer beetles can be controlled through net traps and clove oil treatment. In June 2017, we measured large black chafer beetle population density and leaf damage rates in two orchards, located in Boseong and Hampyeong, under three treatments: net, net plus clove oil, and control. In order to evaluate the effect of net position on the adult beetles, nets were placed outside the orchard and along the upper and lower parts of a horizontal trellis. The adult beetle population density was 20.4 to 34.7% lower in the net alone treatment, and 21.1 to 38.1% lower in the combined net and clove oil treatment than in the control. The adult beetle population density was 10.9-14.4 times higher outside the orchard and 5.1 to 9.1 times higher in the upper parts of the horizontal trellis than in the lower parts of the horizontal trellis. Leaf damage under both the net only and net plus clove oil treatments was significantly lower than that in the control at both sites. Therefore, intensive net installation around orchards may be a practical organic alternative to prevent leaf damage caused by large black chafer beetles.

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.154-158
• /
• 2007

For the application of flexible printed circuit board (FPCB), electroplated copper is required to have low surface roughness and residual stress. In the paper, the effects of surface roughness and residual stress of electroplated copper as thick as $8{\mu}m$ were studied on organic additives such as inhibitor, leveler and accelerator. Polyimide film coated with sputtered copper was used as a substrate. Surface roughness and surface morphology were measured by 3D-laser surface analysis and FESEM, respectively. Residual stress was calculated by Stoney's equation after measuring radius curvature of specimen. The addition of additives except high concentration of accelerator in the electrolyte decreased surface roughness of electroplated copper film. Such a tendency was explained by the function of additives among which the inhibitor and the leveler inhibit electroplating on a whole surface and prolusions, respectively. The accelerator plays a role in accelerating the electroplating in valley parts. The inhibitors and the leveler increased residual stress, whereas the accelerator decreased it. It was thought to be related with entrapped additives on electroplated copper film rather than the preferred orientation of electroplated copper film. The reason why additives lead to residual stress remains for the future work.

• Environmental Engineering Research
• /
• 제23권1호
• /
• pp.46-53
• /
• 2018

This study explores the environmentally innovative and low-impact technology, a zero food waste system (ZFWS) that utilizes food waste and converts it into composts or biofuels and curtails carbon emissions. The ZFWS not just achieves food waste reductions but recycles food waste into fertilizer. Based on a fermentation-extinction technique using bio wood chips, the ZFWS was employed in a field experiment of the system installed in a large-scale apartment complex, and the performance of the system was examined. The on-site ZFWS consisted of three primary parts: 1) a food waste slot into which food waste was injected; 2) a fermentation-extinction reactor where food waste was mixed with bio wood chips made up of complex enzyme and aseptic wood chips; and 3) deodorization equipment in which an ultraviolet and ozone photolysis method was employed. The field experiment showed that food waste injected into the ZFWS was reduced by 94%. Overall microbial activity of the food waste in the fermentation-extinction reactor was measured using adenosine tri-phosphate (ATP), and the degradation rate of organic compounds, referred to as volatile solids, increased with ATP concentration. The by-products generated from ZFWS comply with the national standard for organic fertilizer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.673-675
• /
• 2004

This study proposes controller with voltage-compensated drivers for producing gray-scaled pictures on passive matrix organic light emitting diodes (PMOLEDs) panels. The controller includes voltage type drivers so the output impedance of the driver is far less than that of the current-type driver. Its low output impedance provides better electron-optical properties than those of traditional current drivers. A free running clock and a group of counters are applied to the gray-scaled function so that phase lock loop (PLL) circuit can be reduced in the controller. A pre-charge function is used to enhance performance of the luminance of an active OLED pixel. As a result, distribution of the low gray level portion is achieved linear relationship with input data. In this work, the digital part of the proposed controller is implemented using FPGA chips, and analog parts are combined with a digital-analog converter (DAC) and analog switches. A still image is displayed on a $48^{\ast}64$ PMOLEDs panel to assess the luminance performance fir the controller. Based on its cost requirement and luminance performance, the controller is qualified to join the market for driving PMOLEDs panels.

• Korean Journal of Organic Agriculture
• /
• 제24권1호
• /
• pp.131-138
• /
• 2016

Analyzing the 13 sort contents of broccoli leaves by using GC/MS, sulforaphane was found in 11 sort of broccoli leaves for the result. After being grinded by the blinder, amount of sulforaphane in broccoli leaves was rapidly raised after thirty minutes and maintained the amount till sixty minutes have passed. Among the parts of broccoli, the root had the most sulforaphane. In freezing temperature, biosythesized sulforaphane maintained longer than in room temperature. However, even in frozen condition, the amount of sulforaphane was reduced to half or less after 3 weeks.

• Korean Journal of Organic Agriculture
• /
• 제5권2호
• /
• pp.93-104
• /
• 1997

In order to investigate the growth response of grasses to chitosan solution amended soil were studied from the standpoint of estimating the growth stimulating adequate concentrations of chitosan solution amended soil in each grass. Three species in this experiment used were orchardgrass, tall fescue and reed canarygrass. Six different concentrations of chitosan solution amended soil were 0%(control), 0.01%, 0.05%, 0.1%, 0.5% and 1.0%, respectively. The resulte obtained were as follows ; 1. Leaf area(LA), dry weight of leaf(LW), dry weight of shoot(SHW), biological yield(BY), C/f ratio and T/R ratio were significantly different between species. 2. Growth stimulating effect by chitosan solution amended soil were found in plant length(PL) and T/R ratios of grasses. 3. Adequate concentrations of chitosan solution amended soil were different between species. The highest values of yield components and dry weight of plant parts were obtained at 0.01% in orchardgrass, 0,05% in reed canarygrass and 1.0% in tall fescue, respectively. 4. The growth response of grasses to chitosan solution amended soil were different between species. Thus, an increase in leaf area(LA) and dry weight of leaf(LW) by chitosan solution amended soil was mainly contributed to increase in dry weight of shoot(SHW) and biological yield(BY) in orchardgrass. Chitosan solution amended soil also stimulated growth of shoot and increased in biological yield(BY) in tall fescue. In reed canarygrass contributed to increase in C/F ratios. 5. Adequate concentrations of chitosan solution amended soil for an economical benefit of cultivation and dry matter production of grasses were ranged from 0.01% to 0.05% levels.

• The Korean Journal of Ecology
• /
• 제18권1호
• /
• pp.99-108
• /
• 1995

Deciduous hardwood communities were ecologically analyzed in order to determine their distributional characteristics. The quadrats were sampled in Mt. Chiri, Mt. Deokyu, Mt. Kyeryong, Mt. Sokri, and Mt. Jungwang, and their environmental factors including topographical features as well as soil properties were investigated. The computer program TWINSPAN and CANOCO were used to elucidate the relationship between environmental factors and species composition. In the relations of communities and environmental factors, the optimal ecological habitats of Carpinus tschonoskii community could be the sites at low latitudes such as the regions of southern part of Korea in which total nitrogen and organic matters are rich, while those of Fraxinus mandshurica community, Acer mono community, and Betula costata community could be the sites which are wet and have high total nitrogen and organic matters in soil. The quercus mongolica community is distributed widely throughout Korea, and its ecological habitats could be the sites which have high soil nutrient and moderate soil moisture in central and northern parts of Korea, while those of Quercus variabilis community could be the sites which is dry and have high Mg and C.E.C. value.

• The Korean Journal of Ecology
• /
• 제15권3호
• /
• pp.267-279
• /
• 1992

The relationship between pb, zn, cd, and the microbial biomass and activity were investigated in three public park soils of central and outer london. Variability with distance from the roadside and profile were studied. The heavey metal concentrations were the highest in hampstead heath and hyde park with high trafic density and the lowest in hainault. The highest concentrations of heavy metals were found adjacent to the roadside in the upper parts of the soil profile. Dehydrogenase activity, adenosine tri-phosphate and ergosterol contents used as indices of micrbial biomass and activity, were generally higher in hainadult, and also higher in the upper pats of the soil profile. Simple regression analysis indicated that the microbial biomass and activity were affected significantly by moisture content, water holding capacity, total organic carbon, total nitrogen, and organic mater rather than heavy metal concentration. Highest inputs of nitrogen and carbon were associated with high inputs of heavey metals, all three being derived from vehicle emissions adjacent to the road. The hyde park and hampstead heath microbial populations were able to respond to the c and n input positively by increase in biomass and activity, whereas the hainault populations could not. This rsult suggrsts adaptation in he former to heavy matals, but not in the latter.

• Korean Institute of Interior Design Journal
• /
• 제29호
• /
• pp.273-280
• /
• 2001

In architecture, each project participant must maintain organic relationship with others. However, current practices are rather procedural and discrete than organic, which result in considerable inefficiencies. The cool-downs of Korean construction market also force the architects to be familiar with the new construction methods and systems. This research mainly focuses on the pre-development stage of such systems, analysing relationships between the information of architectural design and other parts of construction information like structure, construction, environment, and so forth. The result of analysis can be organized into attributes of members in a physical building, which can be modeled in a 3D system. The resulting model can be used for automated generation of drawing, Bill of Materials, finite element meshes for structural analysis and energy analysis, etc. by extracting meaningful information from it. Hence, the purpose of this research is to analysis the relationship among domain-specific information (e.g. structural engineering, construction detail, energy evaluation) that are represented in drawings, and to represent the attributes of the information relevantly so that they can be applied to each unit task that forms the whole project. Therefore, an object oriented methodology is introduced to compose design informations in three dimension, and expressing properties of building factors and materials, and to construct a database for computers to recognize architecture informations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.531-532
• /
• 2005

We have used ITO/$Alq_3$/Al structure to study electrical conduction mechanism in $Alq_3$ based organic light emitting diode. Current-voltage characteristics were measured at room temperature by varying the thickness of $Alq_3$ layer from 60 to 400nm. We were able to prove that there are three different mechanism depending on the applied voltage; Ohmic, SCLC (space-charge-limited current). and TCLC (trap-charge -limited current) mechanism.