• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.15-19
• /
• 2012

Both electrogalvanized and hot-dip galvanized steel sheets have been finally produced via organic-inorganic surface coating process on the zinc surface to enhance corrosion resistance and afford additional functional properties. Recently, POSCO has been developed a variety of chromate-free coated steels that are widely used in household, construction and automotive applications. New organic-inorganic hybrid coating solutions as chromate alternatives are comprised of surface modified silicate with silane coupling agent and inorganic corrosion inhibitors as an aqueous formulation. In this paper we have prepared new type of hybrid coatings and evaluated quality performances such as corrosion resistance, spot weldability, thermal tolerance, and paint adhesion property etc. The electrogalvanized steels with these coating solutions exhibit good anti-corrosion property compared to those of chromate coated steels. Detailed components composition of coating solutions and experimental results suggest that strong binding between organic-inorganic hybrid coating layer and zinc surface plays a key role in the advanced quality performances.

• Archives of Reconstructive Microsurgery
• /
• 제24권2호
• /
• pp.75-78
• /
• 2015

High-pressure (HP) injection injury to the upper extremity often causes a very serious clinical problem, leading to poor outcomes, including amputation, so that a true surgical emergency is required. The outcomes can be improved with emergent wide surgical debridement. However the diagnosis of these injuries is often delayed due to underestimated evaluation at first appearance and lack of common knowledge of the seriousness of this injury. The type and pressure of the infecting material is an important factor in prognosis and organic solvents infected pressure injury can cause poor outcome and increased amputation rate. In this case, we report on reconstruction of HP oil-based paint injection injuries of the finger using T-shaped pedicles and multiple venous anastomoses. In this concept, arterial flow can be maintained by the reverse flow of distal anastomosis when there is difficulty with the proximal anastomosis. And venous flow can be preserved by deep and superficial vein anastomosis. This concept has various advantages including preserving patency of the pedicle in chronic vasculopathy or trauma cases and maintaining the arterial flow by the reverse flow of distal anastomosis and can improve the free flap survival by a two vascular anastomosis system.

• KIEAE Journal
• /
• 제3권1호
• /
• pp.13-20
• /
• 2003

It is highly recognized that there is need for protection against indoor air pollution, as we realize environmental pollution is growing, For example, in an indoor environment, a person spends more than 80 percent of their time inside the building. Thus, concern about indoor decoration materials is growing, since they cause pollution in the rooms of an apartment, as well as in offices. As the indoor decoration materials become more diverse and lusurious, so the effect of VOCs(Volatile Organic Compounds) and HCHO(Formaldehy) is growing. The indoor decoration materials cause the Sick Building Syndrome, such as headaches, dizziness, or lack of concentraion, and they in turn cause serious deterioration in people's health. In this study, I probed the status of the indoor air pollution and carried on an investigation and analysis about the prevention technique. In doing so, I performed experimental tests and an assessment of the indoor decoration materials of an apartment. I also examined elements of the emitted and the emission. Finally, I examined the character of emissions, by changing environmental conditions, such as the temperature, humidity, and ventilation. With respect to VOCs tests, I applied the method of solid state adsorption using the adsorptive tube, based on the measurement of the American EPA TO-17, ASTM 5116-97, and the measurement of the Japanese Wall Decoration Industrial Association. The tested sample was analyzed by High Performance Liquid Chromatography, after going through the process of dissolvent extraction. As subjects of the test, Paint were selected. The process of this test is as follows; first, I figured out the character of the emission, by measuring the emitted concentration of VOCs and HOHC from the indoor decoration materials of an apartment. Second, I made a small-scale chamber and the test was processed in the chamber in order to suggest an environment-friendly prediction modlel development.

• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.204-215
• /
• 2008

Many researches for service-life of chemical cartridges of respirators have been performed in many countries. On the result of these researches a few softwares programs were eventually developed to be used. In spite of that, it is difficult to apply these researches and softwares practically in the work spot because of too many factors that influence on service-life of chemical cartridges. This study was the first of two conducted for the purpose of developing program for estimating exchange period or service-life of chemical cartridges available feasibly in the workplaces. Collecting plan of cartridges discarded after use is in principle that three cartridges from three workers at a time, three steps of 1/2 exchange time due to smelling, just routine exchange time and 1.2 to 1.3 expanded time of routine exchange, total nine cartridges are collected in the same job site. 33 cartridges for organic vapor were collected in paint spray process of ship yard and paint factory, and 6 cartridges for acid were collected in plating process. These cartridges were analysed the remaining breakthrough time in 3M Innovation Center. Challenge vapor and breakthrough concentration were complied with Korean regulation for chemical cartridge respirators. Estimated breakthrough time was determined from previously used time plus breakthrough time for the remaining. Exchange period of cartridge would be the shortest time among three estimated breakthrough times. On the result breakthrough time for organic vapor was found to be relatively easily estimated, but that for acid aerosol or vapor was difficult to be confident. Even though this method was difficult to be precisely predicted exchange period of cartridge, it could be an alternative program practically available in the job site.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.83-90
• /
• 2008

Permeability to vapor and water among other performances required for finishing materials is dealt with in this study. The relative moisture content of concrete coated/covered with a finishing material was experimentally investigated while changing the environmental conditions including temperature, relative humidity, and rainfall. An organic paint (water-based urethane), organic synthetic resin emulsion-type film coating (film coating E), and inorganic porcelain tiles were selected as the finishing materials. When compared from the aspect of vapor and water permeability, the vapor permeability and water permeability of water-based urethane were high and low, respectively; those of film coating E were high and high, respectively; and those of porcelain tiles were low and low, respectively. This means that the moisture state of concrete structures is governed not only by the environmental conditions but also by the performance of finishing materials. It is therefore of paramount importance to appropriately select a finishing material to address the specific deteriorative factors involved in the concrete structure to be finished.

• Tuberculosis and Respiratory Diseases
• /
• 제65권6호
• /
• pp.541-545
• /
• 2008

페인트, 가구 도장제 등에 포함된 Isocyanate는 직업성 천식의 흔한 원인물질로 알려져 있고, 과민성 폐렴을 일으키기도 한다. 저자들은 6개월간 자동차 공장 페인트 도장공으로 일한 중국인 노동자에서 isocyanate에 의한 것으로 추정되는 과민성 폐렴 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E2호
• /
• pp.41-48
• /
• 2005

A novel hybrid system composed of a biotrickling filter and an activated sludge reactor was investigated under the conditions of four different SRTs (sludge retention times). The performance of the hybrid reactor was found to be directly comparable among the four different sludge ages. Discernible differences in the removal performance were observed among four different SRTs of 2, 4, 6, and 8 days. High removal efficiency was achieved by continuous circulation of activated sludge over the immobilized mixture culture, which allowed on pH control, addition of nutrients, and removal of paint VOCs (volatile organic compounds). The results also showed that the removal efficiency for a given pollutant depends on the activity of microorganisms based on the SRT. As the SRT increased gradually from 2 to 8 days, the average removal performance decreased. The highest removal rate was achieved at the SRT of 2 days at which the highest OUR (oxygen uptake rate), $6.1mg-O_2/liter-min$ was measured. Biological activity in the recycle microbes decreased to a much lower level, $3.6mg-O_2/liter-min$ at a SRT of 8 days. It is thus believed that young microorganisms were more active and more efficient for the VOCs removal of low concentrations and high flow rates. The apparent correlation of $R^2=0.996$ between the average removal efficiency and the average OUR at each SRTs suggests that VOCs degradation by young cells significantly affected the overall removal efficiency for the tested SRTs.

• 유기물자원화
• /
• 제31권3호
• /
• pp.35-41
• /
• 2023

본 연구에서는 반도체 제조공정에서 발생하는 실리콘 슬러지에 금속산화물인 이산화티타늄을 코팅하였으며, 이를 안료 및 도료의 소재로 응용하였다. 상세히는, 불순물이 제거된 판상형의 실리콘 슬러지 분말에 졸-겔법을 통해 이산화티타늄을 코팅하였다. 안료 및 도료의 소재로서 응용 가능성을 확인하기 위해서 친수성 투명 코팅제에 분산하여 페인트를 제조한 후 유리 기판에 분사하였다. 그 결과, 이산화티타늄의 도입으로 인한 발림성 향상과 하얀색의 발현을 확인할 수 있었다. 본 연구를 통해서 실리콘 슬러지에 이산화티타늄을 코팅함으로써 발림성 및 친수성이 향상됨을 확인하였으며, 이를 통해서 반도체 공정에서 발생하는 실리콘 슬러지가 안료 및 도료의 소재로서 응용 가능성을 확인하였다.

• 보존과학회지
• /
• 제33권6호
• /
• pp.507-518
• /
• 2017

Through a combination of scientific analytical methods, the coloring materials used in $20^{th}$ century paintings in historical churches of Baclayon, Dauis and Loay, which are municipalities in Bohol, Philippines, were studied. Inorganic pigments were identified using SEM-EDS and XRD. Iron-based pigments were commonly found in the paintings, yielding dark yellow and brown colors. Zinc oxide was identified as the white pigment in the ceiling paintings of Dauis Church and Loay Church, while titanium dioxide was detected in the column painting in Baclayon Church. Organic analysis showed the presence of Pigment Yellow 3, a synthetic organic pigment. Paint layers, as well as other components of the samples such as grounds and metal leaves, were examined microscopically. It was observed that different types of grounds were applied on different types of surfaces. Moreover, organic pigments were found in combination with white extender materials. Microscopic examination also revealed alterations in the artworks, such as the overpaint layer found in the samples from Baclayon Church cornice and the imitation metal leaf layers applied over the original gilt surface in the Loay Church retablo.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.65-72
• /
• 2007

VOC Analyzer는 공기 중에 포함되어 있는 VOC (휘발성 유기화합물) 중 toluene, ethyl benzene, xylene, styrene 등 4가지 방향족 탄화수소 가스 농도를 측정하는 측정 장비이다. 검출기에는 고감도 반도체 가스센서를 사용한 가스크로마토그래피방식으로써 캐리어 가스로서는 봄베공기를 사용한다. 또한, 대기 중에 포함되어 있는 다양한 가스성분을 농축하지 않고 VOC를 분리 검출하여 농도를 편리하면서도 자세하게 측정할 수 있으므로 건축자재, 페이트, 도료, 접착제 등에서 응용될 수 있다. 이러한 장점을 가진 VOC Analyzer를 이용하여 목재에 주로 사용되는 도료로부터 VOC 방사거동을 확인하였다. 실험은 시편을 밀봉하여 실험개시 후 일정시간 간격으로 48시간까지 측정하였다. 수용성 페인트와 enamel 페인트의 VOC 방산량은 lacquer와 urethane vanish에 비해 상대적으로 적었으며 4개의 샘플 중에서 lacquer의 VOC 방산량이 가장 높게 나타났다. VOC Analyzer를 이용한 측정법은 현재 사용되고 있는 VOC 측정방법 중 가장 빠르고 경제적인 기술이기 때문에 앞으로 널리 사용된 것이라 기대된다.