• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.762-765
• /
• 2002

The bilayer organic light-emitting diode using Al (DBM) $_3$ (DBM=Dibenzoylmethane) as an emitting material and poly (N-vinylcarbazole) (PVK) as hole-transport material, emitted bright blue-green light instead of blue light. The blue-green emission is attributed to exciplex formation at the solid interface between Al (DBM) $_3$ and the hole-transport material. The exciplex formation was evidenced by the measurement of the photoluminescence spectra and lifetimes of Al (DBM) $_3$, PVK and an equimolar amount of mixture of Al (DBM) $_3$ and PVK.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4590-4599
• /
• 2011

컬러 시프트 현상은 다양한 색상을 생성하는 유기발광다이오드 소자에 있어서 발광 색상의 순도를 저하시키는 주요 원인으로 작용되어지고 있다. 본 연구에 적용한 유기발광다이오드 소자의 기본 구조는 ITO/${\alpha}$-NPD/$Alq_3$:DCJTB [wt%]/$Alq_3$/Mg:Ag로 구성되어지며, 컬러 시프트가 일어나는 메커니즘을 규명하기 위하여 유기발광다이오드 소자 내에서의 전기광학적인 특성 요인들을 수치 해석하였다. 또한 DCJTB[wt%]의 도핑 농도 비율을 변화시켜 가면서 컬러 시프트의 원인을 조사하였다. 그 결과, 발광층과 정공 수송층의 경계면에서 발생되어지는 호스트에 트랩된 전자들과 자유 정공들 그리고 게스트에 트랩된 정공들과 자유 전자들에 의한 재결합율의 변화가 컬러 시프트 현상의 주요 요인들 중의 하나임을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.23-27
• /
• 2006

Recently, Top emission organic light-emitting diode (TEOLED) has been attracted by their potential application for the development of flat panel display (FPD). We have fabricated the high luminance top emission organic-emitting diode (TEOLED) using dual cathode layer and three top emitting structure. These devices were characterized by electroluminescence (EL) and current density-voltage (J-V) measurements. After compared it with Au anode structure, luminance of the device using dual anode was better than using without Al device. Consequently, Al layers are very good candidates for a promising electron-injecting buffer layer for top emission light-emitting diode (TEOLED).

• 한국산업정보학회논문지
• /
• 제10권2호
• /
• pp.76-81
• /
• 2005

본 연구에서는 차세대 디스플레이 소자로 각광을 받고 있는 유기발광 소자의 전기적인 특성을 해석적으로 접근하였다. 기본적인 OLED의 동작 메카니즘은 일함수(work function)가 낮은 음극(cathode) 전극으로부터 주입된 전자(electron)와 양극(anode) 전극으로 주입된 정공(hole)이 수송층을 지나 발광층으로 유입되어 여기상태(exciton state)를 거치며 재결합함으로써 발광되는 것으로 알려져 있다. 따라서 음극과 양극을 통해 들어오는 수송자(carrier)들이 원활한 전자-정공 쌍(electron - hole pair)을 이루기 위해 다층 박막 구조로 소자를 제작하여 높은 에너지 장벽을 완만하게 만들고 또한 박막의 두께를 조절하여 정공과 전자의 이동도 밸런스(balance)를 맞추어 수송자-전자와 정공-들이 수송층(CTL : carrier transport layer)을 통해 발광층(EML : emitting material layer)으로 주입을 용이하게 만든다 따라서 본 논문에서는 유기 발광소자의 최적의 발광특성을 얻기 위해서는 수치 해석을 통한 가장 높은 발광 효율을 가지게되는 박막의 두께를 예측하고 예측된 유기발광소자의 수치해석 값이 실제 제작된 소자의 특성 값과 일치하여 타당성이 있음을 증명하고자 한다.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1343-1351
• /
• 2012

본 연구에서는 디스플레이 기술군을 이루는 LED(Light Emitting Diode), OLED(Organic Light Emitting Diode), LCD(Liquid Crystal Display), PDP(Plasma Display Panel), CRT(Cathode Ray Tube) 등 5개의 연구영역에 대하여 과학계량학 기법을 이용하여 트렌드를 살펴보았다. 해당 연구영역별로 Scopus 데이터베이스 논문과 미국특허청(USPTO) 특허데이터베이스의 특허를 이용하여 각각에 대한 인용데이터를 추출하였다. 논문과 특허의 생산건수와 인용데이터를 이용하여 시간의 흐름에 따른 5개 연구영역의 발전과정 및 현재의 관심도를 분석하고 미래의 트렌드를 전망하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.25-28
• /
• 2002

We have been fabricated white organic light emitting diode with two-wavelength ard mixing blue emit in DPVBi (4, 4-bis(2, 2-diphenylvinyl)-1, 1 -biphenyl)layer and yellow emit in rubrene (5, 6, 11, 12-tetraphenylnaphthacene)as emitting layer which are controlled with thickness. This device emits white light emitting in CIE (0.29, 0.33), 1000cd/$m^2$ at DC 18V.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.257-260
• /
• 2002

This paper describes the pixel of AMOLED(act ive matrix organic light emitting diode) driving circuit by poly-sl technology. The area per pixel is 278um$\times$278um in 120$\times$160(2.2 inch) Driving the OLEDS with active matrix leads to the lower voltage operation, the lower peak pixel currents and the display with much greater efficiency and brightness The role of the active matrix is to provide a constant current throughout the entire frame time and is eliminating the high currents encountered In the passive matrix approach, This design can support the high resolutions expected by the consumer because the current variation specification is norestricted. The pixel has been designed driving TFT threshold voltage cancellation circuit and wide aperture ratio circuit that communizes 4 pixel. The test simulation results and layout are 11% per threshold-current var Eat ion and 12.5% the aperture ratio of increase.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.137-140
• /
• 2007

We prepared ambipolar organic field-effect transistors and observed blue emission when both hole and electron accumulation layers were in the channel. We found that the reduction of carrier traps and controlling devices' preparation and measurement conditions were crucial for ambipolar operation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1050-1055
• /
• 2005

We report the development frontiers that are dictating the speed of adoption of polymer organic light emitting diode (P-OLED) technology in market applications. Our presentation includes both the developments taking place in materials and the rapid advances in the manufacturing processes used for solution processable P OLEDs. On the manufacturing side, the latest progress in ink jet printing process is discussed. On the materials side, we look at both fluorescent and phosphorescent material performance including the CDT development roadmap.