• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1343-1351
• /
• 2012

In this study, trends for five research areas of LED(Light Emitting Diode), OLED(Organic Light Emitting Diode), LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and CRT(Cathode Ray Tube) are investigated using bibliometric analysis. The papers and patents citation data were extracted from Scopus and USPTO databases, respectively. We could figure out the research trends by the number of publications and citation information. We prospect the current interests and future trends by investigating the development process of the 5 research areas as function of time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.616-621
• /
• 2003

The white-light-emitting organic LED with two-wavelength was fabricated using blue emitting material(DPVBi) and a series of orange color fluorescent dye(Rubrene) by vacuum evaporation processes. The basic structure of white-light-emitting OLED was ITO/NPB(150$\AA$)/DPVBi(150$\AA$)/Alq$_3$:Rubrene(150$\AA$)/BCP(100$\AA$)/Alq$_3$(150$\AA$)/Al(600$\AA$). The changes of the CIE coordiante strongly depended on the doping concentration of Rubrene and the thickness of NPB layer. We obtained the white-light-emitting OLED close to the pure white color light and the CIE coordinate of the device was (0.315, 0.330) at applied voltage of 13V when the doping concentration of Rubrene was 0.5wt% and the thickness of NPB layer is 200$\AA$. At a current of 100mA/$\textrm{cm}^2$, the quantum efficiency was 0.35%.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.647-652
• /
• 2004

In aqueous tape casting of alumina slurry systems, the relationships between the suspension compositions and the defects of the dried tapes were discussed. The suspensions compositions were controlled with the ratios of the solids, water and organics binder contents. The effects of the thickness of dried tape and kinds of binder system were also examined. In the defect free region, the apparent viscosity showed nearly same value due to the count balancing effect of solid and organic binder content on the apparent viscosity. When water content was constant, increasing solid led to decrease of organic binder content. The defect free region was narrowed with increasing of casting thickness. When linear type acrylic emulsion binders system (D1000 and D 1035) were used, defect free zone formed the belt type in the triangle of solid, water and organic binder content according to the line of constant water contents. However the defect free region was not found in the cross-link type emulsion binder system (D 1050).

• Journal of Microbiology and Biotechnology
• /
• v.8 no.6
• /
• pp.719-722
• /
• 1998

The addition of decane to biotransfonnation media containing Yarrowia lipolytica led to the accumulation of intennediate L-phenylacetaldehyde and L-phenethyl acetate during bioconversion of L-phenylalanine, whilst none of these products were obtained in conventional aqueous fennentations. The results obtained support an earlier hypothesis (Spinnler et al. 1996. Proc. Natl. A cad. Sci. USA 93: 3373-3376) that organic solvents, acting as "thermodynamic traps" for hydrophobic intermediates, can substantially alter metabolic fluxes.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.199-203
• /
• 2011

Reported herein is the film morphology control of inkjet-printed 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene) organic thin-film transistors for the improvement of their performance and of the device-to-device uniformity. The morphology of the inkjetted TIPS-pentacene films was significantly influenced by the bank geometry such as the bank shapes and confinement area for the channel region. A specific confinement size led to the formation of uniform TIPS-pentacene channel layers and better electrical properties, which suggests that the ink volume and the solid concentration of the organic-semiconductor solutions should be considered in designing the bank geometry.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.2
• /
• pp.33-37
• /
• 2015

High efficiency LED device is being concerned due to its high heat loss, and such heat loss will cause a shorter lifespan and lower efficiency. Since there is a demand for the materials that can release heat quickly into the external air, the organic insulating layer was required to be replaced with high thermal conductive materials such as metal or ceramics. Through anodizing the upper layer of Al, the Breakdown Voltage of 3kV was obtained by using an uniform thickness of $60{\mu}M$ aluminum oxide($Al_2O_3$) and was carried out to determine the optimum process conditions when thermal cracking does not occur. Two Ni layers were formed above the layer of $Al_2O_3$ by sputtering deposition and electroplating process, and saccharin was added for the purpose of minimizing the remain stress in electroplating process. The results presented that the 3-layer film including the Ni layer has an adhesive force of 10N and the thermal conductivity for heat dissipation is achieved by 150W/mK level, and leads to improvement about 7 times or above in thermal conductivity, as opposed to the organic insulation layer.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.25-32
• /
• 2014

The purpose of this research is to develop a process and a system to collect, purify and reuse the residual quantity of trimethylgallium, used as a raw material, upon GaN epitaxial growth for LED from a metal organic chemical vapor deposition(MOCVD) equipment. This research reviews whether TMGa collected from the process can be used through a chemical and structural characteristics evaluation. As a result of analyzing the purity using ICP-MS and ICP-AES, 7N high purity (99.99999%) of TMGa was obtained. According to checking the structural change of TMGa through NMR analysis, TMGa having pure $(CH_3)_3Ga$ structure was obtained without structural change. For reliability review of the collected TMGa, u-GaN was deposited using the MOCVD process and an structural, optical and electrical characteristics evaluation was conducted. As a result, it was found out that the reuse was possible.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1736-1738
• /
• 2000

ITO/TPD($450{\AA}$)/$Alq_{3}(500{\AA})$/Al:Li($1200{\AA}$) 구조의 유기 LED를 제작하였다. Al과 Al:Li(0.lwt%), Al:Li(1wt%), Al:Li(5wt %) 합금을 음전극으로 증착시켜 소자의 전기적 광학적 특성을 분석하였다. 음전극 내의 Li의 분포를 알아보기 위하여 SIMS(Secondary ion Mass Spectroscopy) depth profiling을 하였다. Al:Li합금에서 Li의 함량이 0.1 wt %에서 5 wt %로 증가함에 따라 소자의 turn-on voltage는 약 3.5 V에서 3 V로 감소하였고, 구동전압도 감소하였다. 200$cd/m^2$의 휘도를 기준으로 Al:Li(0.1wt %) 합금을 사용한 소자의 경우 3.5 lm/W로 발광효율이 최대였다. 증착된 Al:Li(0.1wt%) 합금의 SIMS depth profiling 결과 초기에만 Al:Li이 증착되어 Al:Li/Al의 두 층이 형성되었고, Al:Li 합금층의 두께는 약 120${\AA}$ 이었다.

• Journal of Fashion Business
• /
• v.24 no.1
• /
• pp.15-28
• /
• 2020

The purpose of this study was to develop and propose creative smart bags in emotional e-textiles using LEDs that inform smartphone users of motion-induced luminescence and ringing of cell phones. The LED light-emitting operation tasks produced in the study were applied to each of the three design smart bags, setting the five cases of luminance by a call initiated, absent phone, rejecting answering phone, texting, and motion-induced luminescence. In the male laptop bags of LED luminous images using wappen, 10 LEDs could be separated by a total of three pins to display the luminous mode, and all 10 LEDs became a total of five luminous patterns, including all that illuminate and those that illuminate randomly. E-wappen rendered the motif a strong sense of visibility and performed six roles on phone rings and texting. To develop a women's tote bag, we did a laser cut and attached the leather strips and placed 10 triangular LEDs to form a geometric LED e-textile. It provides the possibility of transforming simple design from traditional fashion into a more interesting and various smart designs. An entertainment smart bag using graphic design was constructed by applying a tilt sensor to look like a light in the night sky by shaking and moving the bag. The graphic design and composition of LEDs indicate that LEDs and fashion item are applied in harmony rather than heterogeneous, enabling them to be applied as fashion-oriented wearable smart products.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.3
• /
• pp.43-50
• /
• 2018

In a previous study, the feasibility of four materials (bentonite, steelmaking slag, lime and organic compost) to induce soil aggregate formation was assessed and the mixtures of organic compost and lime were chosen as most effective amendments in terms of cost benefit. This work is a subsequent study to evaluate the effectiveness of those amendments in reducing soil loss in $15^{\circ}$ sloped agricultural area by using rainfall simulation test. Three different soils were treated with two conditions of organic compost/lime mixtures (2% + 2%, 3% + 1%, w/w). In the amended soils, soil fertility was increased due to the increase of CEC, T-N, and T-P. During the rainfall simulation, suspended solid in run-off water from amended soil were reduced by 43% ~ 78%. When the content of organic compost was higher than that of lime, reduction of soil loss was also increased by 67% ~ 78%. Sediment discharge was also decreased by 72% ~ 96% in the amended soil. Similar to the suspended solid analysis, higher organic compost content led to more reduction of soil discharging, which implies organic compost is more effective than lime in reducing soil loss. The overall result suggests that the mixtures of organic compost and lime could be used as amendment materials to reduce soil loss in sloped farmland.