• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.373-378
• /
• 2000

Oil spill in sea water is the most frequent and significant problem of marine pollution. As an early detection sensor of the pollution, an activated carbon coated quartz crystal is prepared and examined for its performance of detection sensitivity and stability. Powdered activated carbon and phenol resin is coated on the surface of the sensor and the sensor is baked for an hour. Adsorption of acetone dissolved in water and salt water is measured using frequency shift of quartz crystal at different concentrations of solute material. The outcome indicates that the sensor preparation is adequate and the measurement of solute concentration is stable and sensitive enough to be implemented on the monitoring of solute concentration is stable and sensitive enough to be implemented in the monitoring of organic pollution of sea water.

• Macromolecular Research
• /
• v.17 no.5
• /
• pp.313-318
• /
• 2009

The side chain liquid crystal triblock copolymers (TBCs), which underwent phase transitions below their decomposition temperature, were prepared by copolymerization of poly(n-butyl acrylate) and a comonomer containing the mesogenic azobenzene group. The physical properties of TBCs in the distinctive transition temperature ranges were investigated in terms of the liquid crystal (LC) content in the copolymers. The phase transition temperatures traced optically, thermally and rheologically were well coincided one another and clearly exhibited the phase transition of smectic-nematic-isotropic with increasing temperature. In the smectic phase, increasing temperature made the liquid crystal system more elastic, but viscosity (${\eta}'$) remained almost constant. In the nematic phase, increasing temperature abruptly decreased ${\eta}'$ and G', ultimately leading to isotropic phase. Both smectic and nematic phases exhibited Bingham viscosity behavior but the former gave much greater yield stress at the same LC content.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.36-41
• /
• 1998

Intercalation compounds of alkyl sulfonates into layered double hydroxides (LDH) have been directly synthesized. From the X-ray diffraction data and the alkyl sulfonates size, the orientation of the intercalated alkyl sulfonate into the layered double hydroxide was determined. The intercalated alkyl sulfonate is arranged with molecular chain perpendicular to the hydroxide layer with an antiparallel pattern.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.110-114
• /
• 2002

The relationship between the orientation of molecules adsorbed on $_TiO2$ and their photoproducts was examined by employing HBPCA (4-hydroxy-biphenylcarboxylic acid) as a model organic pollutant. For this purpose, the Photoproducts after irradiation with UV radiation at various pH were compared by utilizing UV and Raman spectroscopies. It was found from these studies that pH affected the photoproducts probably due to the different orientations of the adsorbed molecules, and that the orientation of the adsorbed molecules and their photoproducts were closely correlated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.292-298
• /
• 1998

${\alpha}-Fe_2O_3$films were prepared by a dip-coating method using the mixed solution of ferric nitrate, ethylene glycol and acethyl acetone. The polymerization effect of the mixed solution was studied by FT-IR spectroscopic analysis, and the decomposition of organic parts and crystallization of the dip-coated film were investigated by FT-IR, XRD and DSC. In addition, AFM and SEM were employed to analyze the surface roughness and the thickness of ${\alpha}-Fe_2O_3$films.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.350-355
• /
• 1998

Dysprosium monotitanate $(Dy_2TiO_5)$ powder was synthesized by a simple mixed-oxide ceramics process using ethylene glycol (EG). Ethylene glycol, as the organic carrier for the metal cations, was used for polymerization mechanism. The successful used of a non-chelating polymer for the mixed-oxide ceramic process indicated that cation chelation is not the only route for creating stable ceramic precursors. Characterization of the powders by various thermal analysis, microscopy, and diffraction methods has been carried out.

• Archives of Pharmacal Research
• /
• v.27 no.3
• /
• pp.357-360
• /
• 2004

Four crystal forms of ketorolac have been obtained by recrystallization in organic solvents under variable conditions. Different ketorolac polymorphs and pseudo polymorph were characterized by X-ray powder diffraction crystallography (XRD), Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In the dissolution studies in water at $37{\pm}0.5^{\circ}C$ four crystal forms showed different patterns. The solubility of Form I were the highest. The solubility decreased in rank order: Form I> Form II > Form III > Form IV. Form land Form III were shown to have a good physical stability at room temperature for 60 days. However, Form II is converted to Form III and Form IV is converted to Form I after 60 days storage. Therefore, these observations indicate that crystalline polymorphism for ketorolac is readily inter-convertible and the relationship may have to taken into consideration in the formulation of the drug.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.537-537
• /
• 2012

We have studied a fabrication of vapor phase polymerized Poly(3,4-ethylenedioxythiophene) (PEDOT) nanowire arrays for the first time. The vapor-phase polymerization (VPP) technique is a bottom-up processing method that utilizes the organic arrangement of macromolecules to easily produce ordered aggregates, including on the nanoscale, or prepare thin films of self-assembled molecules, micropatterns, or modified microstructures of pure conducting polymers. Also, liquid-bridge-mediated nanotransfer molding (LB-nTM), which was reported as a new direct patterning method recently, is for the arrayed formation of two- or three-dimensional structures with feature sizes as small as tens of nanometers over large areas up to 4 inches across and is based on the direct transfer of various materials from a mould to a substrate through a liquid bridge between them. The PEDOT nanowires grown by VPP method and transferred on a substrate to use LB-nTM method have been fabricated to single crystal PEDOT nanowires investigated Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and electrical properties.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.2
• /
• pp.81-85
• /
• 1998

Three polymorphic modifications and two pseudopolymorphic modifications of cefotaxime sodium were obtained by crystallization from different organic solvents. The isolated crystal forms were characterized by UV spectrophotometry, DSC, TGA and X-ray crystallography. Crystal forms of cefotaxime sodium were also compared by dissolution rate. The dissolution rate of form 1 was the highest, followed by form 2, form 4, form 6, form 5 and form 3. Among these polymorphic modifications the dissolution rate of form 3 and form 5 was much slower than that of cefotaxime sodium on the market. All forms showed no change after 2-month storage test in the silica gel desiccator. But after the storage of 2-month at 95% relative humidity condition, all forms were deliquesced by hygroscopic property except form 1 that showed the highest dissolution rate. At 52% relative humidity condition, form 1, form 2 and form 6 had no evidence of phase transformation, but form 3, form 4 and form 5 were also deliquesced.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.5
• /
• pp.350-355
• /
• 2000

The fabrication of sapphire wafer in C plane has been developed by horizontal Bridgeman method and GaN based semiconductor epitaxial growth has been carried out in metal organic chemical vapour deposition. The single crystalline ingot of sapphire has been utilized for 2 inch sapphire wafers and wafer slicing and lapping machines were designed. These several steps of lapping processes provided the mirror-like surface of sapphire wafer. The measurements of the surface flatness and the roughness were carried out by the atomic force microscope. The GaN thin film growth on the developed wafer was confirmed the wafer quality and applicability to blue light emitting devices.