• 공업화학
• /
• 제32권2호
• /
• pp.190-196
• /
• 2021

저품질 석회석의 탈황 성능 개선을 알아보기 위해 초산, 젖산, 개미산 등 3종의 유기산 첨가제를 사용하여 기포형 반응기에서 탈황 반응을 수행하였다. 유기산이 첨가되지 않은 석회석 슬러리는 pH 5.2 이하에서 초기 탈황 효율의 저하가 일어났다. 반면, 유기산이 첨가된 석회석 슬러리는 pH 4.2~4.5에서 안정된 초기 탈황 효율을 나타내었다. 슬러리 pH 4 이하에서 유기산이 첨가된 석회석 슬러리의 탈황 성능은 유기산의 해리에 의해 생성된 음이온의 양과 연관될 수 있다. 슬러리 중 유기산의 음이온 양이 많으면 슬러리 pH의 완충 기능 저하가 급격히 일어나지 않았다. 이와 같은 결과들은 유기산의 산성도 및 해리도에 기인하였다. 3종의 유기산 첨가에 따른 저품질 석회석 슬러리의 탈황 성능 증가율은 초산(2.6%) < 젖산 (6.4%) < 개미산 (16.7%) 순으로 나타났다.

• 청정기술
• /
• 제16권3호
• /
• pp.162-171
• /
• 2010

본 연구에서는 유기산, 무기산, 여러 첨가제들을 이용하여 옥내급수관의 스케일 제거에 적합한 환경친화적인 세정제를 개발하고자 연구를 수행하였다. 여러 유기산 중에서 oxalic acid, citric acid, malic acid 등의 경우 산화철 제거에 비교적 좋은 효율을 보였다. 이들 유기산들을 주축으로 하여 보조제를 첨가하여 옥내급수관 스케일의 주성분인 산화철 제거 평가실험을 하였다. 여러 첨가제 중에 비이온 계면활성제가 산화철 제거력 향상에 매우 뛰어남을 확인할 수 있었다. 그리고 산화철에 대해 높은 용해력을 보인 두 종류의 배합세정제 $F_1$과 $F_2$를 제조하였는데 배합세정제 $F_1$의 경우 유기산과 첨가제로만 이루어져 있어 기존의 화학세척제에 비하여 안전하고 환경친화적이지만 비교적 산화철 용해력이 조금 떨어졌고, $F_2$의 경우는 $F_1$에 무기산을 소량 첨가함으로 산화철 용해력을 보완해 줌으로써 보다 높은 산화철 세정력을 필요로 할 때 사용하는 것이 좋을 것으로 판단된다. 따라서 옥내급수관 세정 시 스케일의 정도에 따라 배합후보 세정제를 선택하는 것이 바람직하다고 판단된다.

• 한국표면공학회지
• /
• 제11권3호
• /
• pp.3-9
• /
• 1978

Organic compounds, such as aldehydes, amines, amides, sulfur compounds of polymers, have been added to cyanide Zinc electroplating bath to achieve in improvement of the brightness and of the current efficiency. It was found that the addition of only one compound o these organic compounds in the bath were unsuitable to be used for brightener, but mixure of aldehyde and reaction products obtained from epoxides and amines and/or amides were suitable for brightener in cyanide zinc electroprating baths.

• 한국초지조사료학회지
• /
• 제42권4호
• /
• pp.264-269
• /
• 2022

본 연구에서는 미생물 첨가에 따라 거세한우 비육우 분의 이화학적 특성, 미생물 성상, 가스발생량 및 퇴비 부숙도에 미치는 영향을 규명하고자 수행하였다. 이상의 결과를 종합하면, 4주 후, 미생물 첨가구에서 수분, 유기물, 총질소 함량 및 pH가 낮았으며, 나머지 이화학적 특성에서는 차이가 나타나지 않았다. 유산균과 효모균 수는 증가하였으며, 대장균 수는 감소하였다. 12주 후, 미생물 첨가구에서 유산균과 고초균 수는 높았으나, 수분, 효모 및 대장균 수는 낮게 낮았다. 하지만 암모니아, 황화수소 발생량과 퇴비 부숙도는 미생물 첨가에 의한 효과가 나타나지 않았다. 따라서, 거세한우 분에 미생물을 첨가하면 유익균은 증가하고, 병원성 미생물은 감소하여, 비육우의 생산성은 증진될 것으로 사료되지만, 가스 발생량 및 퇴비 부숙도에 대한 추가적인 연구는 지속적으로 수행되어야 할 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.108-113
• /
• 2016

A miniaturized lab-scale Cu plating cell for the metallization of electronic devices was fabricated and its deposit uniformity and profile were investigated. The plating cell was composed of a polypropylene bath, an electrolyte ejection nozzle which is connected to a circulation pump. In deposit uniformity evaluation, thicker deposit was found on the bottom and sides of substrate, indicating the spatial variation of deposit thickness was governed by the tertiary current distribution which is related to $Cu^{2+}$ transport. The surface morphology of Cu deposit inside photo-resist pattern was controlled by organic additives in the electrolyte as it led to the flatter top surface compared to convex surface which was observed in the deposit grown without organic additives.

• 한국식품영양학회지
• /
• 제12권2호
• /
• pp.204-208
• /
• 1999

In order to obtain data for use of algin in drink making process solution properties of algin have been investigated at various condition of algin concentration temperature pH and various food additives. At same revolution velosity viscosities of algin were increased as algin concentration raised. Algin solution showed dilatnat type flow in concentration of 0.25% to 0.4% but pseudoplastic type flow in above 0.5% showed dilatant type flow in concentration of 0.25% to 0.4% but pseudoplastic type folw in above 0.5% A maximum viscosity of algin was observed at pH 5.5 and its viscosities were also decreased as the tem-perature increased and heating at 8$0^{\circ}C$ above. Organic acids affected on the viscosity of algin with pH dependently and gel formed in pH below 3.0 Sweetners have no effect to the viscosity of algin. How-ever addition of NaCl and KCL upto 1.0% decreased a little its viscosity and CACl2 MgCl2 and FeCl3 increased the viscosity of algin Glutamic acid decreased the viscosity of algin.

• 한국세라믹학회지
• /
• 제43권6호
• /
• pp.351-357
• /
• 2006

The fabrication process of the honeycomb filter was investigated using synthesized cordierite with the addition of pore former and extrusion additives (either organic matter or graphite). Also, the effect of additives on the resultant properties of honeycomb filter such as porosity, thermal expansion coefficient and mechanical strength were investigated. With increasing the organic matter up to 10 wt%, porosity was increased but compressive strength was decreased. With increasing the graphite content, however, both porosity and compressive strength were increased. The specimen with an optimum processing condition (C-17A30G, sintering at $1150^{\circ}C$) was demonstrated 59% in porosity, 69 MPa in compressive strength, and $2.4{\times}10^{-6}/^{\circ}C\;(25{\sim}1000^{\circ}C$) in thermal expansion coefficient, which physical properties are appropriate for the honeycomb filter applications.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.17-22
• /
• 2000

The separation of tryptophan enantiomers was carried out with medium-pressure liquid chromatography using BSA (bovine serum albumin)-bonded silica as a chiral stationary phase. The influence of various experimental factors such as pH and ionic strength of mobile phase, separation temperature, and the presence of organic additives on the resolution was studied. In order to expand this system to preparative scale, the loadability of sample and the stability of stationary phase for repeated use were also examined. The separation of tryptophan enantiomers was successful with this system. The data indicated that a higher separation factor (a) was obtained at a higher pH and lower temperature and ionic strength in mobile phase. Addition of organic additives (acetonitrile and 2-propanol) in mobile phase contributed to reduce the retention time of L-tryptophan. About $30\%$ of the separation factor was reduced after 80 days of repeated use.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.276-279
• /
• 2004

The factors affecting Ni-Co alloy electroforming were investigated to determine the optimum bath composition and electroplating parameters, like pH, temperature, and current density, suitable for high speed fabrication of a micro mold with longer lifetime. To obtain alloy deposits having uniform thickness and composition, electroplating parameters were finely tuned with home-made electroforming apparatus. Ni-Co alloy deposits had linearly increased Co with $Co^{2+}$ ion concentration in electroplating bath, and showing $412H_v$ of Victors hardness at $23wt\%$ of Co content. For Ni-Co alloy, sulfonate and diol related organic additives were very effective to alleviate its residual stress and surface roughness. The maximum deposition rate was $106{\mu}m/hr$ at 10ASD and the tensile strength of alloy deposit was 2 times larger than that of Ni only case.

• 한국표면공학회지
• /
• 제36권2호
• /
• pp.184-193
• /
• 2003

Cyclic sweep voltametry was performed to investigate the electrochemical behavior of heavy metal ions and the organic additives in surface finishing process. And electrolysis using parallel plate electrode electrolyzer was carried out to simulate the treatment of real waste water. Results showed that more than 99 percent of Cu was recovered and selective recovery of Cu in mixed waste water was possible, but the possibility of economical recovery of Ni and Cr were very low due to the evolution of hydrogen gas. Electrochemical oxidation of cyanide and organic additives on anode showed very excellent removal rate. The complete removal of several hundred ppm of cynide was possible within several tens minutes and organics within 2 or 3 hours. Even in case of concentrate waste water, the complete removal of COD by using NaCl and air stirring seemed to be possible.