• Journal of Distribution Science
• /
• v.18 no.12
• /
• pp.5-13
• /
• 2020

Purpose: The objective of this study is to explore and prioritize strategic factors for revitalization of the sports contents distribution industry. Research design, data and methodology: To this end, strategic factors for revitalization of the sports contents distribution industry were explored based on literature review, and 14 experts were consulted to prioritize the factors. Results: Major conclusions deduced are the following: First, the factors were prioritized in order of legal policy factors, contents factors, and technical infrastructure factors. Second, subdomains of legal policy factors were prioritized in order of policy process factors, legislation enactment and revision factors, budget factors, business model factors focusing on sports contents. Third, subdomains of contents factors were prioritized in order of humanware contents factors, sports contents diversification factors, and high-quality sports contents production factors. Fourth, subdomains of technical infrastructure factors were prioritized in order of sports contents service platform factors, technical development and standardization, global distribution channel provision, and distribution metadata standardization. Conclusions: Findings of this study are of significance given that this study stratifies factors of sports contents distribution industry revitalization-about which there have been very few previous studies- analyzed mainly in terms of justifiability and timeliness, and presents preferential business strategies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.106-116
• /
• 2016

MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.

• Journal of Korea Technology Innovation Society
• /
• v.4 no.2
• /
• pp.224-241
• /
• 2001

This paper is an inquiry into the patterns of technological innovation of bio - industry in Korea in comparison with the worldwide patterns. In another words, this study wants to check whether the patterns of technological innovation of bio - industry in Korea differ front those in advanced countries or not. The comparison is based on the theory of science - based industry asserted by Seol (2001) and Cho (2001). There are no specific difference in the patterns of technological innovation such as science - based innovation, capitalization of science, industries leading by scientific fields, the importance of venture firms for commercialization, high level of R&D expense to sales. Also the order of fields by size is similar to worldwide patterns. But the size of microbiology is bigger than that of worldwide patterns. The strength in microbiology may be the country specific features of Korea, like platform technology of Germany.

• International Journal of Contents
• /
• v.6 no.2
• /
• pp.14-20
• /
• 2010

Korean Cultural Content Industry is developing creative cultural content based on internationally acknowledged manufacturing capacity, however, in order to become cultural industry with international competitiveness, it has to be planned and made in OMSU way. This research studied and analyzed successful cases of cultural content digital restoration and excellent cases of OSMU-type that has been developed and supported by Korean Culture and Contents Agency. This study suggests the direction of growth on the basis of movement of cultural content industry and cultivating plan of human resources.

• The Journal of Information Systems
• /
• v.26 no.3
• /
• pp.211-228
• /
• 2017

Purpose This study proposes a research model based on Expectation-Confirmation theory in order to investigate impacts of three variables(expectation confirmation, social interaction, and perceived usefulness) on continuous intention to uss SNS in MICE industry. Design/methodology/approach A survey approach was used in order to measure each latent variable in the research model. A total of 140 responses were collected from actual users of SNS in MICE industry. A structural equation modeling with SmartPLS 2.0 was conducted in order to analyze each relationship in the proposed research model. Findings The results indicated the expectation confirmation had a positive impact on the perceived usefulness, social interaction, and satisfaction. Second, perceived usefulness had a significant positive impact on satisfaction and continuous intention to use SNS in MICE industry. Thrid, social interaction had a positive influence on both satisfaction and continuous intention to use SNS in MICE industry. Finally, the relationship between satisfaction and continuous intention in SNS of MICE industry was fully supported.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_1
• /
• pp.169-176
• /
• 2022

Prognostics and health management (PHM) is recently converging throughout the industry, one of the trending issue is to detect abnormal conditions at decanter centrifuge during water treatment facilities. Wastewater treatment operation produces corrosive gas which results failures on attached sensors. This scenario causes frequent sensor replacement and requires highly qualified manager's visual inspection while replacing important parts such as bearings and screws. In this paper, we propose anomaly detection by measuring the vibration of the decanter centrifuge based on the video camera images. Measuring the vibration of the screw decanter by applying the optical flow technique, the amount of movement change of the corresponding pixel is measured and fed into the LST M model. As a result, it is possible to detect the normal/warning/dangerous state based on LSTM classification. In the future work, we aim to gather more abnormal data in order to increase the further accuracy so that it can be utilized in the field of industry.

• The Journal of Asian Finance, Economics and Business
• /
• v.10 no.1
• /
• pp.19-29
• /
• 2023

Logistics industry is being an important industry in Vietnam with the contribution from 8-10% of GDP recently. This industry employs about 15 millions people. Increasing the employees' job satisfaction is become one of the most concerns of managers in logistics companies to strengthen the employee engagement and improve their business performance. The aim of this study is to investigate how employees' perceptions of job satisfaction are influenced by factors such as job stress, leadership capability, work-life balance, and demographics. 426 workers in the logistics sector in Vietnam were surveyed online. The acquired data was analyzed using a structural equation model. In total 16 hypotheses were established, 13 of which were deemed to be significant. The results demonstrate how the literature-informed second-order constructs can potentially explain the overall job stress, leadership capability, and work-life balance of employees in the Vietnamese logistics industry. These variables account for 54.8% of job satisfaction. This study makes a theoretical contribution to the extant literature by showing how researching second-order constructs can improve the theory's capacity to predict employees' job satisfaction. The paper concludes with a set of recommendations for the management of logistics firms in Vietnam.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.56
• /
• pp.77-100
• /
• 2012

China draws lots of attention from many multinational corporations all over the world as one of the biggest market in the world. Due to the huge territory and explosive population, it is considered that China has endless potentiality. Moreover, since China joined the WTO, China opens its market, developing the policies for opening of its market. Based on the enormous purchasing power, China gets another attention in industry of electronic commerce. With the development and expansion of information technologies, China's electronic commerce has rapidly developed. Since the market of electronic commerce in China is in the developing stage, there is still a big market for electronic commerce and also Chinese government has made much effort in order to develop the industry of electronic commerce. However, in spite of these circumstances, the Chinese electronic commerce industry is far behind the developed countries. There could be many reasons for slow development in industry of electronic commerce and the main purpose of this paper is to discuss these reasons. First of all, the current status of electronic commerce industry in China will be analysed, and then, main problems of electronic commerce industry will be discussed in order to find out the reasons why the industry of electronic commerce cannot develop as much as it is anticipated. It is expected that this paper can contribute to understanding electronic commerce industry in China, and it will be helpful for companies which have a plan to extend their businesses in China.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.166-169
• /
• 2002

The purpose of this paper is to develop systematic analysis and automatic tuning rule of PID controller for industry servo applications. Considering the coupling of inner current control loop and speed loop delay, the target plant fit into second-order plus time delay model. Based on PID controller design for high-order plus known/unknown time delay plant model, some formulars are provided for the control gain calculation and system-based theoretical analysis is developed, and it also allows an automatic controller setup to benefit the inexperienced user. In addition, the proposed design rule gives uniformly satisfactory performance and the motor speed stays on a desired response curve with minimal oscillation and settling time. This approach can be applicable in conjunction with the cascaded control loop which is widely used in practice.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.83-95
• /
• 2019

In order to promote the domestic aircraft manufacturing industry, this study analyzed the limitations of the preceding study on the WTO dispute concerning civil aircraft by summarizing the latest developments and issues in the mid-range aircraft dispute between Brazil and Canada and the large civil aircraft dispute between the United States and the EU. Based on the results of the study, we should look closely at WTO regulations and existing cases of disputes to find maximum support measures, and we believe that in order to stimulate the domestic aircraft manufacturing industry, we should refrain from publicly specifying support measures in the data, such as laws and policies, utilize the WTO SCM Agreement exceptions, and strengthen links with international cooperation and other industries.