• 한국IT서비스학회지
• /
• 제8권2호
• /
• pp.147-156
• /
• 2009

As the result of the rapid development of IT technology, an on-line diagnostic system using the field bus communication network coupled with a smart sensor module will be widely used at the nuclear power plant in the near future. The smart sensor system is very useful for the prompt understanding of abnormal state of the key equipments installed in the nuclear power plant. In this paper, it is assumed that a smart sensor system based on the fieldbus communication network for the surveillance and diagnostics of safety-critical equipments will be installed in the harsh-environment of the nuclear power plant. It means that the key components of fieldbus communication system including microprocessor, FPGA, and ASIC devices, are to be installed in the RPV (reactor pressure vessel) and the RCS (reactor coolant system) area, which is the area of a high dose-rate gamma irradiation fields. Gamma radiation constraints for the DBA (design basis accident) qualification of the RTD sensor installed in the harsh environment of nuclear power plant, are typically on the order of 4 kGy/h. In order to use a field bus communication network as an ad-hoc diagnostics sensor network in the vicinity of the RCS pump area of the nuclear power plant, the robust survivability of IT-based micro-electronic components in such intense gamma-radiation fields therefore should be verified. An intelligent CCD camera system, which are composed of advanced micro-electronics devices based on IT technology, have been gamma irradiated at the dose rate of about 4.2kGy/h during an hour UP to a total dose of 4kGy. The degradation performance of the gamma irradiated CCD camera system is explained.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.404-411
• /
• 2009

In this paper, in order to increase system capacity and reduce the transmitting power of the user's equipment, we propose an efficient power estimation consisting of a modified open-loop power control (OLPC) and closed-loop power control (CLPC) schemes for mobile/satellite communications systems. The OLPC works well if the forward and reverse links are perfectly correlated and the CLPC is sensitive to round-trip delay (RTD). Therefore, it is not effective in mobile/satellite system. In order to solve the above problem, we added monitoring equipment to both the OLPC and CLPC to use information about transmitting power that has not yet been received by the receiver over the satellite/ATC channel. Moreover, we adapted an efficient pilot diversity of both OLPC and CLPC in order to get a better signal to interference plus noise ratio (SIR) estimation of the received signal.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 추계학술대회
• /
• pp.97-99
• /
• 1992

After development of order communication system for out-patients using PC and LAN in May 1992, this system had been tested for 2 months. The system also use Host computer(IBM 9221-170) as a data bank and communicats wi th emulation card(3270 emulator. Interlink Inc., Korea). Since September 1992, this system(named YOUSEI-PC) has been running successfully in the Yonsei Cardiovascular Center of the Severance Hospital, Yonsei University College of Medicine. After introducing this system, it enables patients to receive drugs wi thin 30 minutes after prescription and revealed effective system not to reduce waiting time for the patients but also to remove charge-troubling(due to mis-entry of prescription). This system also seems to be effective in terms of office automatism for hospital management. However users, usually physitions, required more friendly and easy system to operate and we thought that the most important one to successfully introduce order communication computer system in the hospital is user interface.

• 한국항행학회논문지
• /
• 제26권1호
• /
• pp.1-8
• /
• 2022

원격측정 시스템은 비행체의 상태 정보를 계측하여 지상으로 전송하는 시스템이다. 지상에서 수신한 데이터는 비행체의 상태를 모니터링하기 위한 정보로 점검 프로그램을 통해 실시간으로 점검 및 분석이 가능하다. 현재 운용중인 원격측정 자료처리 점검 시스템은 유선 통신을 이용하여 데이터를 전송하고 점검을 수행하도록 구축되어 있다. 계속되는 정보통신기술의 발전으로 스마트 기기가 대중화되면서 무선 통신 네트워크가 중요해지고 있으며, 성능 개선을 위한 기술 개발이 꾸준히 이루어지고 있다. 때문에 본 논문에서는 기존 방식을 탈피하고 미래지향적인 기술을 적용하기 위해 태블릿과 같은 스마트 기기를 통해 점검 가능한 무선 통신(Wi-Fi; Wireless fidelity) 기반의 원격측정 자료처리 지상 점검 시스템을 제안하고 구축하였다. 또한 점검 장비와 점검 프로그램을 연동하여 다양한 환경에서의 테스트를 통해 제안한 점검 시스템의 성능을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.105-111
• /
• 2020

In most multiple input/output systems, one input affects two or more different outputs. Therefore, there are many inconveniences in using the actual system. In order to solve this problem, a controller that makes an input signal and an output correspond 1:1 is called a decoupling controller. In this paper, I try to implement a relatively simple decoupling controller using a cross-compensator, that is, a compensator that takes an uncorresponding output as an input value. And this cross-compensator has a gain scheduler structure in order to increase the performance. In addition, this system is designed with a distributed control structure using CAN communication, so that it can be manufactured and operated in an easier way when implementing an actual experimental system. The proposed structure is applied to the modified new Arago's disk system and tested, and through this, the effectiveness is confirmed and reported.

• Journal of information and communication convergence engineering
• /
• 제19권4호
• /
• pp.221-227
• /
• 2021

An early warning system was developed to help identify stock status as early as possible. For performance to improve, there needs to be a feature to predict the amount of stock that must be provided and a feature to estimate when to buy goods. This research was conducted to improve the inventory early warning system and optimize the Reminder Block's performance in minimum stock settings. The models used in this study are the single exponential smoothing (SES) method for prediction and the economic order quantity (EOQ) model for determining the quantity. The research was conducted by analyzing the Reminder Block in the early warning system, identifying data needs, and implementing the SES and EOQ mathematical models into the Reminder Block. This research proposes a new Reminder Block that has been added to the SES and EOQ models. It is hoped that this study will help in obtaining accurate information about the time and quantity of repurchases for efficient inventory management.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.507-510
• /
• 1996

In this paper we present the multi-agent robot system developed for participating in micro robot soccer tournament. The multi-agent robot system consists of micro robot, a vision system, a host computer and a communication module. Mcro robot are equipped with two mini DC motors with encoders and gearboxes, a R/F receiver, a CPU and infrared sensors for obstacle detection. A vision system is used to recognize the position of the ball and opponent robots, position and orientation of our robots. The vision system is composed of a color CCD camera and a vision processing unit. Host computer is a Pentium PC, and it receives information from the vision system, generates commands for each robot using a robot management algorithm and transmits commands to the robots by the R/F communication module. And in order to achieve a given mission in micro robot soccer game, cooperative behaviors by robots are essential. Cooperative work between individual agents is achieved by the command of host computer.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.175-180
• /
• 2002

In order to satisfy the requirements of time reduction and cost saving for development of electronic control systems(ECU) in automotive industry, the applications of a standardized real-time operating system(RTOS) and a communication protocol to ECUs are increased. In this study, a body control module(BCM) that employs OSEK/VDX(open system and corresponding interfaces for automotive electronics/vehicle distributed executive) OS tour the RTOS and a controller area network(CAN) fur the communication protocol is designed, and the performances of the system are evaluated. The BCM controls doors, mirrors, and windows of the vehicle through the in-vehicle network. To identify all the transmitted and received control messages, a PC connected with the CAN communication protocol behaves as a CAN bus emulator. The control system based upon in-vehicle network improves the system stability and reduces the number of wiring harness. Furthermore it is easy to maintain and simple to add new features because the system is designed based on the standards of RTOS and communication protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3572-3593
• /
• 2015

This article investigates the topology control problem in the space information network (SIN) using a hierarchical autonomous system (AS) approach. We propose an AS network topology control (AS-TC) algorithm to minimize the time delay in the SIN. Compared with most existing approaches for SIN where either the purely centralized or the purely distributed control method is adopted, the proposed algorithm is a hybrid control method. In order to reduce the cost of control, the control message exchange is constrained among neighboring sub-AS networks. We prove that the proposed algorithm achieve logical k-connectivity on the condition that the original physical topology is k-connectivity. Simulation results validate the theoretic analysis and effectiveness of the AS-TC algorithm.

• 한국정보전자통신기술학회논문지
• /
• 제2권4호
• /
• pp.53-58
• /
• 2009

최근 각 종 분야에서 센서들을 이용한 연구 및 활용도가 증가하고 있다. 본 논문에서 는 3축 가속도 센서를 이용해 serial 통신을 통한 물체의 기울기를 감지 및 검출 하고 사용자는 실시간으로 모니터링 할 수 있는 GUI 환경 및 기울기 감지 시스템을 제안하였다. 기존 전자식 액체충전 방식의 기울기 센서의 불안정한 데이터와 오차의 단점을 줄이고자 AD 변환기가 내장된 디지털식 3축 가속도 센서를 이용함으로서, 보다 정확한 데이터를 검출하여 정확도를 높이고 사용자는 이상 여부를 보다 쉽게 인식할 수 있었다.