• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 추계 학술발표회 논문집
• /
• pp.119-124
• /
• 1999

A selection methodology of liquid levelmeters, especially, level sensors in non-nuclear category, to be installed in nuclear energy facilities is developed using linguistic fuzzy approaches such as fully-linguistic and semi-linguistic methods. Depending on defuzzification techniques, the linguistic fuzzy methodology leads to either linguistic (exactly, fully-linguistic) or cardinal (i.e., semi-linguistic) evaluation. For the linguistic method, for each alternative, fuzzy preference index is converted to linguistic utility value by means of a similarity measure determining the degree of similarity between fuzzy index and linguistic ratings. For the cardinal method, the index is translated to cardinal overall utility value. According to these values, alternatives of interest are linguistically or numerically evaluated and a suitable alternative can be selected. Under given selection criteria, the suitable selections out of some liquid levelmeters for nuclear facilities are dealt with using the linguistic fuzzy methodology proposed. Then, linguistic fuzzy evaluation results are compared with qualitative result available in the literature. It is found that as to a suitable option the linguistic fuzzy selection is in agreement with the qualitative selection. Additionally, the comparative study shows that the fully-linguistic method using adequate scale system facilitates linguistic interpretation regarding evaluation results.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권3호
• /
• pp.217-222
• /
• 2016

Dental treatment is often performed under general anesthesia or sedation when an intellectually disabled patient has a heightened fear of treatment or has difficulty cooperating. When it is impossible to control the patient due to the severity of intellectual disability, conscious sedation is not a viable option, and only deep sedation should be performed. Deep sedation is usually achieved by propofol infusion using the target controlled infusion (TCI) system, with deep sedation being achieved at a slightly lower concentration of propofol in disabled patients. In such cases, anesthesia depth monitoring using EEG, as with a Bispectral Index (BIS) monitor, can enable dental treatment under appropriate sedation depth. In the present case, we performed deep sedation for dental treatment on a 27-year-old female patient with mental retardation and severe dental phobia. During sedation, we used BIS and a newly developed Anesthetic Depth Monitor for Sedation (ADMS$^{TM}$), in addition to electrocardiography, pulse oximetry, blood pressure monitoring, and capnometry for patient safety. Oxygen was administered via nasal prong to prevent hypoxemia during sedation. The BIS and ADMS$^{TM}$ values were maintained at approximately 70, and dental treatment was successfully performed in approximately 30 min.

• 디지털산업정보학회논문지
• /
• 제15권3호
• /
• pp.129-137
• /
• 2019

Recommendation systems help users by suggesting items such as products, services, and information. However, most research on recommendation systems has not considered people's moods although the appropriate contents recommended to people would be changed by people's moods. In this paper, we propose a situation-based recommendation system which exploits people's mood. The proposed scheme is based on the fact that the mood of a user is changed frequently by the surrounding environments such as time, weather, and anniversaries. The environments are defined as feature identifications, and the rating values on items are stored as feature identifications at a database. Then, people can be recommended diverse items according to their environments. Our proposed scheme has some advantages such as no problem of cold start, low processing overhead, and serendipitous recommendation. The proposed scheme can be also a good option as of assistance to other recommendation systems.

• Advances in materials Research
• /
• 제8권2호
• /
• pp.103-115
• /
• 2019

Polypropylene (PP) fibers for making fabric which is used for packing cement have a high strength and high tear resistance. Due to these excellent properties the present study investigates the effect of PP fibers on the mechanical strength of concrete. Mechanical strength parameters such as compressive strength, splitting tensile strength and flexural strength are evaluated. Structural integrity of concrete using Ultrasonic Pulse Velocity (UPV) was also studied. Concrete containing PP fibers in percentage of 0%, 0.15%, 0.25%, 0.5% and 0.75% was developed with a characteristic compressive strength of 25 MPa. Concrete cubes, cylinder and prismatic specimens were cast and tested. It was found that the UPV values recorded for all specimens were of the similar order. Test results indicated the used of PP fibers can significantly improve the flexural and splitting tensile strengths of concrete materials whereas it resulted a decreased in compressive strength. The relative increase in split tensile and flexural strength was optimum at a fiber dosage of 0.5% and a mild decreased were observed in 28 days compressive strength. The findings in this paper suggested that PP fibers deriving from these waste cement bags are a feasible fiber option for fiber-reinforced concrete productions.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.345-355
• /
• 2019

Use of the reconstructed fuel assemblies from partially burnt nuclear fuel pins is analyzed. This reutilization option is a potential candidate technique to make better use of the nuclear resources. Standard two step method is used to calculate node i.e. fuel assembly average burnup and then pin by pin ${\eta}$ values are reconstructed to ascertain the residual reactivity in the used fuel pins. Fuel pins with ${\eta}$ > 1:0 are used to reconstruct to-be-reused fuel assemblies. These reconstructed fuel assemblies are burnt during the cycle 3, 4, 5 and 6 of a 1000 MW PWR core by replacing fresh, once burnt and twice burnt fuel assemblies of the reference core configurations. It is concluded that using reconstructed fuel assemblies for the fresh fuel affect dearly on the cycle length (>50 EFPD) when more than 16 fresh fuel assemblies are replaced. However, this loss is less than 20 days if the number of fresh fuel assemblies is less than eight. For the case of replacing twice burned fuel, cycle length could be increased slightly (10 days or so) provided burnt fuel pins from other reactors were also available. Reactor safety parameters, like axial off set (< ${\pm}10%$), Doppler temperature coefficient (<0), moderator temperature coefficient at HFP (<0) are always satisfied. Though, 2D and 3D pin peaking factors are satisfied (<1:55) and (<2:52) respectively, for the cases using eight or less reconstructed fuel assemblies only.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.6139-6160
• /
• 2018

For ease of use and access, web browsers are now being used to access and modify sensitive data and systems including critical control systems. Due to their computational capabilities and network connectivity, browsers are vulnerable to several types of attacks, even when fully updated. Browsers are also the main target of phishing attacks. Many browser attacks, including phishing, could be prevented or mitigated by using site-, user-, and device-specific security configurations. However, we discovered that all major browsers expose disparate security configuration procedures, option names, values, and semantics. This results in an extremely hard to secure web browsing ecosystem. We analyzed more than a 1000 browser security configuration options in three major browsers and found that only 13 configuration options had syntactic and semantic similarity, while 4 configuration options had semantic similarity, but not syntactic similarity. We: a) describe the results of our in-depth analysis of browser security configuration options; b) demonstrate the complexity of policy-based configuration of web browsers; c) describe a knowledge-based solution that would enable organizations to implement highly-granular and policy-level secure configurations for their information and operational technology browsing infrastructures at the enterprise scale; and d) argue for necessity of developing a common language and semantics for web browser configurations.

• 건축역사연구
• /
• 제31권5호
• /
• pp.7-20
• /
• 2022

Traditional building technique has been used as the main technology in the field of architectural heritage conservation in South Korea. It has remained this way with very little resistance until now. But the time has come to question the appropriateness of traditional technique as conservation technique. In this paper a study was done on the properties of the traditional technique and the architectural heritage conservation technique in order to define the appropriateness between the two techniques. As a result the traditional technique was found to be unfit for conservation technique. The reasons are as follows. First, there is a time gap between the traditional technique and the time when the heritage was first built. Second, conservation work is about retaining the values of being a heritage while the traditional technique is about safeness and practicality. Third, the use of traditional technique comes with using the tools of its time which cannot ensure the safety of the heritage. The traditional technique must be looked upon as one of an option in the field of conservation. We must develop a better conservation technology by finding balance between the traditional technique and modern science. And further more an aggressive investment must be made in order to realize this objective.

• Computers and Concrete
• /
• 제28권6호
• /
• pp.585-603
• /
• 2021

The validation based on the experimental data demonstrates that the concrete strength under triaxial compression (TC) is overestimated by Lubliner-Oller strength criterion (SC) but underestimated by Lubliner-Lee SC in ABAQUS. Moreover, the discontinuous derivatives of failure criterion exists near the unexpected breakpoints. Both resulted from the piecewise linear meridians of the original Lubliner SC with constants γ. Following the screen for the available failure criteria to determine the model parameter γ of Lubliner SC, Menétrey-Willam SC (MWSC) is considered the most promising option with a reasonable aspect ratio Kc but no other strength values required and only two new model parameters introduced. The failure surface of the new Lubliner SC based on MWSC (Lubliner-MWSC) is smooth and has no breakpoints along the hydrostatic pressure (HP) axis. Finally, predicted results of Lubliner-MWSC are compared with other concrete failure criteria and experimental data. It turns out that the Lubliner-MWSC can represent the concrete failure behavior, and MWSC is the optimal choice to improve the applicability of the concrete damaged plasticity model (CDPM) under TC in ABAQUS.

• 재무관리연구
• /
• 제23권2호
• /
• pp.209-237
• /
• 2006

기존의 기업부도 예측모델들은 장부가치를 기준으로 한 회계적 자료에 의존하여 부도확률을 평가함으로써 시장의 상황변화를 민감하게 반영하지 못하며, 이론적 배경도 약하다는 약점을 가지고 있었다. 그러나 시장정보형 부도예측모형은 기업의 부도예측에 시장가치를 이용함은 물론 Black-Scholes(1973)의 옵션가격결정이론이라는 옵션이론을 배경으로 하고 있어 최근 들어 많은 기업들이 신용리스크를 평가하는 데 사용하고 있으며 그 대표적인 모형이 KMV이다. 우리나라 기업들도 최근 들어 KMV를 많이 사용하고 있으나, 미국기업들과 부채구조가 다른 데도 미국에서 사용하는 KMV모형을 그대로 사용함으로써 부도시점 예측 시 오차가 발생한다는 문제를 가지고 있다. 본 연구에서는 부채구조가 다를 경우 KMV모형을 그대로 사용하면 안 되고 부도확률 산출 시 부채구조를 감안하여야 함을 실증적으로 입증하였다. 즉, KMV모형을 국내에 적용할 경우, 부도확률계산 시 고정부채의 편입비율 50%로 일률적으로 적용하는 것보다는 부채구조를 감안하여 20% 이하로 고정부채편입비율을 조정해야 부도예측능력이 제고된다는 것을 확인함으로써 기업의 신용리스크관리에 중요한 시사점을 제공하고 있다. 또한 IMF 외환위기와 같은 외부충격이 기업부도에 미치는 영향을 확인하였으며, 한국기업들의 경우 유동비율보다는 유동부채비중이 부도점 산정에 보다 중요함도 확인하였다.

• 재무관리연구
• /
• 제21권1호
• /
• pp.205-229
• /
• 2004

풋-콜 패리티에 괴리가 생길 경우 각종 차익거래 및 스프레드 전략이 가능하게 되고 이로 인해 현물, 선물 및 옵션시장 가격의 움직임이 발생하게 되므로 이 관계식의 성립여부는 실제로 시장가격에 영향을 미칠 수 있다. 본 연구에서는 10분 간격으로 측정된 현물, 선물, 콜 옵션, 그리고 풋 옵션 가격 및 가격의 변화가 풋-콜 패리티 조건으로부터의 괴리율과 어떤 관계를 가지고 있는지 GARCH(1,1)모형을 이용하여 분석하였다. 우선 풋-콜 패리티 조건에 괴리가 발생했을 때 다시 균형상태로 회귀하려는 경향을 발견할 수 있었다. 즉, 괴리율이 (+)의 값을 가질 때 현물가격과 풋 옵션의 가격은 하락하고, 콜 옵션의 가격은 상승함으로써 향후 괴리율의 크기가 줄어드는 모습을 보여주었다. 시장에 따라 다소 차이가 있지만 전반적으로 괴리율의 변화는 각 시장에서 가격의 향후 변동에 약 60분가량 영향을 주고 있었으며, 시차항 변수에 대한 회귀계수의 크기를 비교해볼 때 시간이 지날수록 괴리율이 각 시장가격에 미치는 영향도 점차 줄어들고 있었다. 그러나 KOSPI 200 주가지수 선물가격의 움직임에서는 풋-콜 패리티 괴리율과의 뚜렷한 연관성을 보이지 않았다. 교차상관분석에 따르면 주가지수선물의 가격이 새로운 정보에 가장 신속하게 반응함으로써 기타 시장에서의 가격을 일정기간 선도하고 있는 것으로 여겨진다.