• Asian Journal of Turfgrass Science
• /
• v.3 no.2
• /
• pp.89-94
• /
• 1989

Research was conducted to obtain t he optimum treatment Of sodium hypochlorite(NaOC I) at various temperatures in t he seed scarification for stimulating germination of zoysiagrass (Zocysia Japonica Steud ) seed. Morphological changes of seed coat were also examined by scanning electron micros cop(SEM). l. Differences in temperature of scarification with 2 .4% NaOCI showed little influence on promoting germination of seeds but seeds treated with 1% solution at l5˚C germinated less than that of higher temperatures. The promotion effect of 4% solution on germination was diminished when seeds were treated for 8 hours of more. The most favorable seed scarification unaffected hy temperature for enhancing germination was 4-6hours treatment at 4% solution in fresh seeds. 2. $GA_3$, treatment did not enhance germination of water-pretreated control seeds hut germination of seeds pretreated with NaOCI l was increased additional 10% or more hy$ GA_3$, Water pretreated control seeds treated with 50 mM hydrogen peroxide(H'O )germinated about 44%. In NaOCI treated seeds. $H_2$$O_2$ treatment increased germination additional l 0% or more. 3. NaOCI l and KOH treatment softened the seed coat and formed the pores hy removing the scab-like thikenings attached to the seed surface. These results suggest that the modes of action of NaOCl in the promotion of seed germination reside in it increase of the permeability of the seed coat, and in the provision of additional oxygen to the seed.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.435-442
• /
• 1995

A matrix modification was studied for the determination of trace bismuth in water samples by graphite furnace atomic absorption spectrophotometry. The type and quantity of modifiers as well as the use of auxiliary modifiers were investigated to realize the efficient modification. Palladium was chosen as a single modifier. By the addition of palladium($5{\mu}g/mL$) to 100 ng/mL bismuth solution, the temperatures could be raised from $500^{\circ}C$ to $1,300^{\circ}C$ for the charring and from $2,000^{\circ}C$ to $2,200^{\circ}C$ for the atomization as well as the sensitivity and reproducibility were improved. The absorbance of bismuth was maximum and not changed in the range of Pd $3-25{\mu}g/mL$. And several materials were examined as an auxiliary modifier. The mixed solution of $1{\mu}g/mL$ palladium and $200{\mu}g/mL$ nickel have raised the temperatures as with $5{\mu}g/mL$ palladium only. The maximum absorbance of bismuth was shown in the nickel concentration range of $100-300{\mu}g/mL$ in $1{\mu}g/mL$ palladium modified system. With such optimum conditions, the trace amount of bismuth in several water samples could be determined by a calibration curve method, and good recoveries were also obtained.

• Korean Journal of Animal Reproduction
• /
• v.16 no.2
• /
• pp.157-164
• /
• 1992

This stduy was carried out to obtain basic information available on ovulation, spawning, fertilization rate, hatching rate, and deformity rate after hCG injection in cyprinid loach, Misgurnus mizolepis. The results obtained in these experiments were as follows: 1. Ovulation and spawning occurred simultaneously and spawing was completed within 1 hour after ovulation. 2. More than 80% of fertilization rates appeared within 12 hours at 21$^{\circ}C$, 8 hours at $25^{\circ}C$, and 4 hours at 29$^{\circ}C$, respectively, following the onset of spawing. Afterwards, the fertilization rates of released eggs sharply decreased in three different water temperatures. 3. More than 70% of hatching rates appeared within 8 hours at 21$^{\circ}C$, 6 hours at $25^{\circ}C$, and 2 hours at 29$^{\circ}C$, respectively, following the onset of spawing. Afterwards, hatching rates of spawned eggs abruptly decreased in three different water temperatures. 4. The deformity rates of hatched larvae were high at $25^{\circ}C$, 8 hours following the onset of spawing. 5. Based on the developmental ability of oocytes, the optimum time of fertilization was 4 hours (stage 5) following the onset of spawing.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.4
• /
• pp.273-280
• /
• 2011

In this study, the steady state performance of a $CO_2$ heat pump water heater was measured with a variation of operating conditions such as refrigerant charge amount, compressor frequency, EEV opening, and water mass flow rate. Transient state performance tests were also conducted to investigate major system effects associated with the interaction between the $CO_2$ heat pump water heater and the water tank. Optimum refrigerant charge amount for the system was 1600 g. At compressor frequencies of 50 Hz and 60 Hz, water mass flow rates of 95 kg/h and 105 kg/h, and EEV opening of 8% and 16%, the water heating temperatures were $65^{\circ}C$ and $68^{\circ}C$ and COPs were 3.0 and 2.8, respectively. In the transient condition, the instantaneous COP decreased with an increase in the inlet water temperature.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1116-1123
• /
• 2020

Velvet antler (VA) is a historically traditional medicinal supplement and is well known in Asian countries for its pharmaceutical and health benefits. The objectives for this study were to optimize the hot water extraction (HWE) of VA for the Korean VA industry, and to determine the most effective pretreatment method among microwave (MW), ultrasonication (US), and enzymatic (EZ) techniques. Using response surface methodology, optimum extraction temperatures and times were determined by central composite design configuration based on extraction yield and sialic acid content. Various quality parameters of VA extract including yield, soluble solid, protein, and sialic acid contents were also compared with the conjunction of HWE and pretreatment. The yield and sialic acid content of VA extract were determined to be 40% and 0.73 mg/g, respectively, under an optimum temperature of 100℃ at 24 h of extraction time. The yields from VA extracts pretreated with MW, US, and EZ were 17.42%, 19.73%, and 29.15%, respectively. Among the tested commercial enzymes, pepsin was the most effective proteolytic enzyme and led to the highest yield (47.65%), soluble solids (4.03 °brix), protein (1.12 mg/ml), and sialic acid (3.04 mg/ml) contents from VA extract.

• The Korean Journal of Food And Nutrition
• /
• v.7 no.1
• /
• pp.51-57
• /
• 1994

A nuluk, a Korean traditional koji for brewing, was made with wheat flour and Aspergillus usamii mot. shirousamii S1 which had strong abilities in producing amylase and protease. The cultural conditions for the production of saccharogenic and proteolytic enzymes were tested. The productivities of saccharogenic and dextrogenic enzymes were improved when nuluk was made with unsteamed wheat flour as compared with steamed one, but those of proteolytic enzyme and organic acid were reduced. The addition of water containing 0.5% of hydrochloric acid was unfavorable for the production of saccharogenic, dextrogenic and proteolytic enzymes. The optimum ratios of water added to wheat flour for the production of saccharogenic enzyme and proteolytic enzyme were 32% and 28%, respectively on the basis of wheat flour. The optimum temperatures for the production of saccharogenic enzyme and proteolytic enzyme were 36$^{\circ}C$ and 28$^{\circ}C$, respectively. The activity of saccharogenic enzyme reached its maximum after 120 hours of cultivation at 36$^{\circ}C$, but that of proteolytic enzyme 96 hours. The productivity of saccharogenic enzyme was enhanced when the nuluk was molded after 24 hours of precultivation but that of proteolytic enzyme was reduced as compared with no molding.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.6
• /
• pp.533-540
• /
• 2000

Condensation heat transfer characteristics have been investigated experimentally when a water vapor is condensed on the outside of a horizontal copper tube in a condenser. This problem is of particular interest in the design of a LiBr-water absorption system. Hydrophilic surface modification was performed to increase the wettability on the copper tube. The optimum hydrophilic treatment condition using acethylene and nitrogen as reaction gas is also studied in detail. The results obtained indicate that the optimum reaction gas ratio of acethylene to nitrogen for hydrophilic surface modification was found to be 7 : 3 for the best condensation heat transfer. In the wide ranges of coolant inlet temperatures, and coolant mass flow rates, both the condensation heat transfer rate and the condensation heat transfer coefficient of a hydrophilic copper tube are increased substantially, compared with those of a conventional copper tube used in a condenser. It is also found that the condensation heat transfer enhancement by the hydrophilic surface modification still emains even after a hundred cycles of wet/dry processes.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.122-126
• /
• 2001

Eleven bacterial strains which were able to utilize terephthalic acid as a carbon and an energy source for growth were isolated from the soil of 7 water quality evaluation points in Kyonggi area of Korea. According to the report from the authorities, biochemical oxygen demands of the water at 4 points were reported over 20 ppm but those of 3 points were repOlted less than 2 ppm in 1997. Optimum temperatures of growth and terephthalic acid degrading activity of some isolates were not identical but optimum growth temperature was 30$^{\circ}$C. Most of the isolates utilized one or two of the phthalate isomers as a carbon source for growth and the isolates from the 4 contaminated points showed higher terephthalic acid degrading activity than those from the 3 clean points.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.2
• /
• pp.109-117
• /
• 2009

In this study, thermodynamic performance of R430A is examined both numerically and experimentally in an effort to replace HFC134a used in the refrigeration system of domestic water purifiers. Even though HFC134a is used predominantly in such a system these days, it needs to be phased out in the near future in Europe and most of the developed countries due to its high global warming potential. To solve this problem, cycle simulation and experimental measurements are carried out with a new refrigerant mixture of 76%R152a124% R600a using actual domestic water purifiers. This mixture is numbered and listed as R430A by ASHRAE recently. Test results show that the system performance with R430A is greatly influenced by the amount of charge due to the small internal volume of the refrigeration system of the domestic water purifiers. With the optimum amount of charge of 21 to 22 grams, about 50% of HFC134a, the energy consumption of R430A is 13.4% lower than that of HFC 134a. The compressor dome and discharge temperatures and condenser center temperature of R430A are very similar to those of HFC134a at the optimum charge. Overall, R430A, a new long term environmentally safe refrigerant, is a good alternative for HFC134a requiring little change in the refrigeration system of the domestic water purifiers.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.16-23
• /
• 2009

The porous pellets were prepared from porphyry by slurry foaming method. The effect of sintering temperatures on pore structure of porous porphyry pellets with different extension ratio ($E_R$) was investigated by specific surface area, water absorption and porosity, which changed with sintering temperatures. When the sintering temperatures increased from $975^{\circ}C$ to $1075^{\circ}C$, specific surface area and water absorption of the all samples decreased. In case of the sample with an equal sintering temperature, $E_R=3.0$ pellets had little influence on pore structure compared to the $E_R=2.0$ pellets. As a results, it was shown by SEM that facilitated formation of micro pores at $E_R=2.0$ pellets shrunk increasingly after sintering process. At $E_R=3.0$ and sintering temperature at $1025^{\circ}C$, optimum conditions of the porous porphyry porous pellets was found. Also, Escherichia coli removal efficiency of the silver-containing porphoyry porous pellets was measured for the feasibility as a antibacterial media. The antibacterial activity of prepared silver-containing sample was maintained above 90% for 40 days.