• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.5
• /
• pp.318-324
• /
• 2004

In the recently, the necessity of linear position control motors have been increased in the various fields of the automatic control system. In this paper, we have designed the tooth models of the hybrid type linear stepping motor(HLSM); rectangular type(RT), triangle type(TrT), round type(RdT) and wedge type(WT), and proposed the optimum tooth shape of the HLSM by simulating(Flux2D) the thrust and normal force characteristics with the finite element method(FEM) and the virtual work method. And we have manufactured the prototype HLSM with the optimum tooth, and measured the various values by using experimental system. Thus, we have confirmed the justice of theory because the computed and the experimental results almost coincide with.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.817-823
• /
• 2008

A pin fin with variable fin base thickness is optimized based on the ratio of heat loss to the maximum heat loss using a two-dimensional analytic method. The temperature profile along the normalized radius position in the fin is presented. For fixed fin outer radius, the optimum heat loss, fin length and efficiency as a function of fin base thickness, outer radius, convection characteristic numbers ratio and ambient convection characteristic number are presented. One of the results shows that the effect of fin outer radius and ambient convection characteristic number on the optimum fin length is remarkable.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.512-517
• /
• 2008

The brake system is very important part of the machine working. If the machine can't be stopped, it would be serious accident. It is the same as the ship. The mooring winch brake hold the ship in harbor. But sometimes it appeared the excessive stress and brake lining would be broken. So it is necessary to change the shape of brake system with improve the braking power. This study carried out research on optimum design like as moved the position of link pin or modified the thickness of brake band and lining.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.492-497
• /
• 2000

This paper focuses on the weight minimization of radial gate, as an extention of the previous work. Radial gates are commonly used to regulate the flow-rate of general purpose dams, due to its simplicity in manufacture and control. The present study identifies the optimum position of support point for 2 and 3 arm type radial gate, which guarantees the minimum weight satisfying strength constraint condition. These optimum designs are then compared with previously constructed radial gates. The results indicate that the weights of the optimized radial gates reduce by about 20%, compared to those of the conventionally designed radial gates.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.407-410
• /
• 2002

A three-phase 6/8 structure Switched Reluctance Motor drive, the construction of the stator and the rotor. in the motor, the scheme of the rotor position detector and the main circuit of the power converter are described. The range of the stator pole arc factor and the rotor pole arc factor of the motor are analyzed in the linear region. The optimum range of the stator pole arc factor and the optimum range of the turn-off angle of the main switches in the power converter are given with the 2-D finite element electro-magnetic field calculation of the motor and the nonlinear simulation. Test jesuits of the developed prototype are discussed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.394-400
• /
• 2012

Due to the increasing demand for carious methodologies, the quality improvement of products were introduced. A brush, the most frequently used type of grinding process, is one of the deburring. In order to produce consistent burr shape, various machining conditions have been combined and applied to disk grinding process. By tool dynamometer, acoustic emission sensor and acceleration sensor depend on changes in processing conditions(depth of engagement, cutting speed, workpiece position, workpiece orientation, cutting time) signals were obtained for brush deburring grinding system. Root mean square obtained by processing the signal processing conditions by analyzing the characteristics of deburring is to derive the optimum conditions.

• Journal of Biosystems Engineering
• /
• v.18 no.4
• /
• pp.351-357
• /
• 1993

Recently, a garlic peeler with high performance is being demanded due to increase of consumption of peeled garlic. Although the air type out of various types of garlic peelers is recommended to remove effectively skin of garlic, it has an important problem of large energy consumption. This study was performed to analyze performance of an air-type garlic peeler for its optimum design. Performance indices to represent performance of garlic peeler include peeling ratio, energy efficiency and peeling performance. The factors such as aperture of nozzle, angle and position of air injection, charge rate of garlic, peeling time and so on must be considered to design optimally an air-type garlic peeler.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.13-30
• /
• 2010

Existing domestic ink market had some problem because of dependence on CPP import, increasing cost, competitive price. For this reason, previous speed of research and developments are very slow. Therefore, develop the new waterborne type of non-chlorine resin, enhance the nation's position with manufacturing outstanding products. Through this thesis, the purpose is mix the polar resin and non-chlorine resin with many proportion and manufacturing better product than existing resin. Pilot production samples have run the test of adhesion, transparency, water resist and resist high pressure car washing. In conclusion, this thesis found that mix acryl Urethane resin and Non-Chlorine resin is the optimum condition.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.819-826
• /
• 2004

A multi-step optimum strategy for the selection of the locations and directions of strain gauges is proposed in this paper to capture at best the modal response of blade in a series of modes on fan blades. It is consist of three steps including two pass reduction step, genetic algorithm and fine optimization to find the locations-directions of strain gauges. The optimization is based upon the maximum signal-to-noise ratio(SNR) of measured strain values with respect to the inherent system measurement noise, the mispositioning of the gauge in location and gauge failure. Optimal gauge positions for a fan blade is analyzed to prove the effectiveness of the multi-step optimum methodology and to investigate the effects of the considering parameters such as the mispositioning level, the probability of gauge failure, and the number of gauges on the optimal strain gauge position.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.357-359
• /
• 1999

It is necessary for the optimum design of switching devices to calculate repulsion forces acting on the closed electric contacts flowing over-current, e.g. inrush current and overload currents. In this paper, the forces generated by currents and flux densities at the contact point when circuit breakers are in closed position are obtained by using 3D finite element method. According to the analysis, the optimum configuration of wipe springs and arc extinguishing chambers are newly designed and consequently type tests show satisfactory results.