• 멤브레인
• /
• 제8권1호
• /
• pp.29-41
• /
• 1998

수용상 MPD(m-phenylene diamine)와 유기상 TMC(trimesoyl chloride)를 사용하여 역삼투 복합막의 활성층 고분자인 aromatic polyamide 제조를 행하고 그 성능을 고찰하였다. 또한 polysulfone 다공성 지지막 위에 박막을 회분, 연속식으로 계면중합 제조한 후, 제조변수에 따른 역삼투 성능을 비교하였다. 회분식으로 복합막을 제조한 결과 유기상 용매의 종류, 단량체의 농도와 함침시간, 열처리 온도, 중화제, 알코올 후처리, 산 후처리 등에 의해 다양한 성능을 나타내었다. 이때, 투과량 향상에는 알코올 후처리 효과가, 또 선택도의 향상에는 단량체의 농도와 함침시간이 변수이었다. 최적조건에서 연속식 공정으로 막모듈을 제조하여 NaCl 5,000 ppm, $25kg_f/cm^2$에서 상용막과 비교할때, 투과량은 33% 증가하고 배제율은 5% 감소하였다.

• Journal of Microbiology and Biotechnology
• /
• 제14권5호
• /
• pp.1022-1030
• /
• 2004

The gene encoding Aquifex pyrophilus (Apy) DNA polymerase was cloned and sequenced. The Apy DNA polymerase gene consists of 1,725 bp coding for a protein with 574 amino acid residues. The deduced amino acid sequence of Apy DNA. polymerase showed a high sequence homology to Escherichia coli DNA polymerase I-like DNA polymerases. It was deduced by amino acid sequence alignment that Apy DNA polymerase, like the Klenow fragment, has only the two domains, the $3'{\rightarrow}5'$ exonuclease domain and the $5'{\rightarrow}3'$ polymerase domain, containing the characteristic motifs. The Apy DNA polymerase gene was expressed under the control of T7lac promoter on the expression vector pET-22b(+) in E. coli. The expressed enzyme was purified by heat treatment, and Cibacron blue 3GA and $UNO^{TM}$ Q column chromatographies. The optimum pH of the purified enzyme was 7.5, and the optimal concentrations of KCl and $Mg^{2+}$ were 20 mM and 3 mM, respectively. Apy DNA polymerase contained a double strand-dependent $3'{\rightarrow}5'$ proofreading exonuclease activity, but lacked any detectable $5'{\rightarrow}3'$ exonuclease activity, which is consistent with its amino acid sequence. The somewhat lower thermostability of Apy DNA polymerase than the growth temperature of A. pyrophilus was analyzed by the comparison of amino acid composition and pressure effect.

• Journal of Microbiology and Biotechnology
• /
• 제16권1호
• /
• pp.57-63
• /
• 2006

We have cloned a xylanase gene (xynA) from Streptomyces thermocyaneoviolaceus. The deduced amino acid sequences of the XynA, including the active site sequences of glycosyl hydrolase family 10, showed high sequence homology with several xylanases assigned in this category. The XynA was overexpressed under an IPTG inducible T7 promoter control in E. coli BLR(DE3). The overproduced enzymes were excreted into culture supernatants and periplasmic space. The purified XynA had an apparent molecular mass of near 54 kDa, which corresponds to the molecular mass calculated from its gene. The optimum pH and temperature of the purified XynA were determined to be 5.0 and $65^{\circ}C$, respectively. The XynA retained over $90\%$ its activity after the heat treatment at $65^{\circ}C$ for 30 min. The XynA was highly efficient in producing xylose (X1), xylobiose (X2), xylotriose (X3), and xylotetraose (X4) from xylan.

• 한국미생물·생명공학회지
• /
• 제17권1호
• /
• pp.69-73
• /
• 1989

자가분해 효소는 Cl. butyricum의 포자형성 배지에서 배양할 때 체외로 배출되어 배양액에도 존재하였다. 배양액으로부터 약 50배로 부분정제된 자가분해 효소를 사용하여 효소의 성질을 조사하였다. 자가분해 효소의 최적 pH와 온도는 각각 5.0과 37$^{\circ}C$였으며 중성 pH에서는 안정하나, 열에는 비교적 불안정하여 5$0^{\circ}C$에서 5분간 열처리한 후 효소활성의 70%가 소실되었다. 또한 Cu ion$^{++}$에 의해서 효소활성이 저하되었으나 그 밖의 금속이온에 의하여서는 큰 영향을 받지 않았다. 또한 자가분해 효소는 기질로서 영양세포에는 직접 활성을 나타내지 못하나, 세포벽 fraction에는 활성을 가지고 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제7권6호
• /
• pp.409-416
• /
• 1997

Leuconostoc sp. LAB145-3A isolated from kimchi produced a bacteriocin which was active against food pathogens, such as Listeria monocytogenes, Enterococcus faecalis, and E. faecium. Bacteriocin production occurred during the early exponential phase of growth and was stable upto the late stationary phase of growth. Optimum conditions for bacteriocin production were $37^{\circ}C$ with an initial pH of 7.0. The bacteriocin of LAB145-3A was sensitive to proteases, but stable for solvents, pH change and heat treatment. It was stable even at autoclaving temperature for 15 min. The bacteriocin exhibited a bactericidal mode of action against Lactobacillus curvatus LAB170-12. The bacteriocin produced by Leuconostoc sp. LAB145-3A was purified by CM-cellulose cation exchange column chromatography and Sephadex G-50 gel filtration. The purification resulted in an approximate 10,000-fold increase in the specific activity. Approximately 4% of the initial activity was recovered. Purified bacteriocin exhibited a single band on the SDS-PAGE with an apparent molecular weight of 4,400 daltons. This bacteriocin was named leucocin K. Leuconostoc sp. LAB145-3A had two residential plasmids with molecular sizes of 23 kb and 48 kb. A comparison of plasmid profiles between LAB145-3A and its mutants revealed that the 23 kb plasmid (pCA23) was responsible for bacteriocin production and immunity to the bacteriocin in Leuconostoc sp. LAB145-3A.

• 태양에너지
• /
• 제2권2호
• /
• pp.11-20
• /
• 1982

This paper presents the experimental investigations of a system as a second treatment means to increase boiler efficiency and heat transfer from combustion gas to heating surfaces in the case of spray combustion. In order to reburn residual combustible components accelerate the burning rate of sprayed fuel droplets, improve the diffusion flame and delay the residence time of the flame, advice with slit type nozzles for spouting preheated supplementary air is used in this study. In the experiment, boiler efficiency and smoke concentration in the exhaust gas at given conditions are measured in both case of installing and not-installing device in the model of combustion chamber which was designed to be equipped with five surfaces. The results obtained in this experiment are as follows ; 1. The optimum values of air rate ${\lambda}$ are about 1.3 in both case. 2. The exhaust gas temperature in the case with device increases about $30{\sim}70^{\circ}C$ above that of the case without the device. 3. Boiler efficiency and reduction effect of smoke emissions are improved considerably.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.111-117
• /
• 2020

Centrifugal casting is suitable for producing hollow-products using centrifugal force. Bush type metal bearings are the key parts that facilitate the rotational movement of various machinery. Metal bearings produced by conventional centrifugal casting machines show rotational imbalance. Therefore, after injecting a large amount of material, the product's precision is secured in the secondary processing. Rotational imbalance is caused by the force acting on the rotary disc plate. In order to minimize rotational imbalance, NASTRAN was used for the optimal design and structural analysis. It was concluded that the rotating plate of the conventional centrifugal casting machine should be prevented from tilting. For this purpose, the location & thickness of the stiffeners were obtained through the optimum design. In the conventional centrifugal casting machine, both ends of the product are lower in temperature than the center part, so internal stress occurs. This solves this problem by inserting a heating coil into the rotating plate.

• 한국주조공학회지
• /
• 제17권3호
• /
• pp.286-291
• /
• 1997

Influence of Si contents on the mechanical properties and microstructure of austempered ductile iron was investigated. Four different Si contents between 2.0 and 2.9% were used. Austenitizing was performed at $890^{\circ}C$ for 2 hrs and austempering temperatures were both 340 and $380^{\circ}C$ for 0.5, 1, and 2 hrs. Nodule content was more than $300/mm^2$ and nodularity was more than 90%. Microstructure was revealed using nital and retained austenite was measured by x-ray diffractometer. Tensile test, no-notch Charpy impact test and wear test were performed. Tensile strength was improved as Si content increased and both elongation and impact toughness had peak at 2.6%Si. The specimen austempered at $380^{\circ}C$ showed lower tensile strength than that of $340^{\circ}C$, but showed higher elongation. However, austempering temperature of $380^{\circ}C$ was desirable because that of $340^{\circ}C$ was close to lower bainite transformation. As austempering time increased, tensile strength and elongation were improved and optimum condition was obtained for 2 hrs heat treatment.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.391-397
• /
• 2002

Synthesis and process development of nano-size Ti powder by SFE(Sodium/halide Flame Encapsulation) method were investigated. Four concentric coflow burner was used and its flame configuration was $TiCl_4/Ar/Na/Ar$ in order from the center. Flame has been controlled by the various processing parameters such as temperature of burner and flow rates of both $TiCl_4$(g) precursor and Na(g). It was found that yellow-colored flame was shown in the flow rates of 70cc/min of $TiCl_4$(g) precursor and 2 $\ell$ /min of Na(g) which were regarded as optimum flame condition. The powders encapsuled by NaCl were produced having the average powder size of 250nm. The results of X-ray diffraction showed that powders from the optimized condition consisted of pure Ti and NaCl. TEM analysis confirmed that the several Ti powders of 20-100nm were encapsulated with NaCl. After removing sodium chloride by heat treatment, the spherical Ti powders with the size range of 80 to 150nm were obtained.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.241-248
• /
• 2003

Biaxially textured Ni tapes were fabricated by a cold working and recrystallization heat treatment processes from powder compact rods. The processing parameters associated with the cube texture formation in Ni tapes were systematically investigated by using X-ray diffraction and pole-figure analysis. The Ni powder used in this study was 5 $\mu$m in size and 99.99% in purity. To find the optimum sintering temperature, tensile tests were performed for Ni rods sintered at various temperatures. The Ni rods sintered at 100$0^{\circ}C$ showed poor elongation and low fracture strength, while the Wi rods sintered above 100$0^{\circ}C$ revealed good mechanical properties. The higher elongation and fracture strength of the Ni rods sintered at higher temperatures than 100$0^{\circ}C$ are attributed to the full densification of the sintered rods. The sintered Ni rods were cold-rolled with 5% reduction to the final thickness of 100 $\mu$m and then annealed for development of rube texture in rolled Ni tapes. The annealed Ni tapes depicted strong cube texture with FWHM(full-width at half-maximum) of in-plane and out-of-plane in the range of 8$^{\circ}$ to 10$^{\circ}$. The NiO deposited on the Ni tapes by MOCVD process showed good epitaxy with FWHM=10$^{\circ}$, which indicates that the Ni tapes can be used as a substrate for YBCO coated conductors.