• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.991-996
• /
• 1995

Effects of high hydrostatic pressure on microorganisms and browning enzymes in Angelica keiskei juice were investigated using response surface methodology. The optimum process condition for maximum reduction of total aerobes was $5700\;kg_f/cm^2$ (558.6 MPa) pressure and 7.16 min process time, and 3.44 log cycle reduction of total aerobes was predicted at the optimum condition. E. coli, initially $8.8{\times}10^3\;CFU/ml$, was completely inactivated by high hydrostatic pressure at all process conditions ($3800{\sim}6700\;kg_f/cm^2\;pressure;\;3{\sim}17\;min\;process\;time$). Polyphenol oxidase and peroxidase were partly inactivated by the high hydrostatic pressure. It was also indicated that inactivation of microorganisms and browning enzymes by hydrostatic pressure is dependent on pressure rather than process time.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.1
• /
• pp.49-56
• /
• 2008

According to the recent trends which are the diversity of customer requests and the multi-function of buildings, A construction company's business has converted from the producer-oriented approach to the consumer-oriented approach. Therefore, each construction company is continuously trying to improve the quality level as a way of corresponding to customer needs in these changing situations. The quality is one of the main management targets which judge the success of a project along with the schedule, the cost and the safety. As construction companies execute the quality management which they aimed at, it should be completed within the optimum schedule and the limit of the budget. Accordingly, the importance of the construction site management to complete a project is continuously increasing. The construction site management is the systematic method to perform the project goals such as the quality improvement, the cost saving and the safety management, which organically operate one another, by procuring the manpower, the material and the machine in the right time. Specially, as the construction industry has based on the construction site, the establish of systematic construction site management, which can effectively correspond sudden changes of the construction business environment, is essential to maximize the construction productivity. On top of that, the necessity of the quality management method is increasing to accommodate customer needs more spontaneously in the construction site. These endeavors could guarantee their competitive power.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.191-196
• /
• 2016

This study aimed to evaluate SBR operation cycle for removing the high-concentration organic matter of distillery wastewater in the ginseng processing plant. The experiment was conducted with the use of a laboratory scale SBR reactor and distillery wastewater as the influent. The results indicated an increase in pH from 4.08 to 7.59 of distillery wastewater after aeration for 2 hours. Also, the optimum SBR operation cycle for the removal of organic matter and nitrogen was 2 hr of aeration and 6 hr of anaerobic conditions. Adjustment of proper pH through aeration time is most critical in the SBR operation for distillery wastewater treatment. In this study, we presented an efficient method for distillery wastewater treatment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.127-130
• /
• 2009

In this paper, we introduce a Y/T(Yard Tractor) Multi-Cycle System on the basis of RTLS that improves a low efficient loading and unloading. In the proposed approach, we apply the best suited algorithm looking for seeking of the optimum path and the shortest movement distance. In this paper, Our experiment results show that rate of a driving distance is reduced more than 12% compared to the average value, and that is reduced more than 23% compared to the maximum value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.19-25
• /
• 2016

Engineering structures including civil infrastructures require a life-cycle cost and benefit during their service lives. The service life of a structure can be extended through appropriate inspection and maintenance actions. In general, this service life extension requires more life-cycle cost and cumulative benefit. For this reason, structure managers need to make a rational decision regarding the service life management considering both the cost and benefit simultaneously. In this paper, the probabilistic decision tool to determine the optimal service life based on cost-benefit analysis is presented. This decision tool requires an estimation of the time-dependent effective cost-benefit under uncertainty to formulate the optimization problem. The effective cost-benefit is expressed by the difference between the cumulative benefit and life-cycle cost of a deteriorating structure over time. The objective of the optimization problem is maximizing the effective cost-benefit, and the associated solutions are the optimal service life and maintenance interventions. The decision tool presented in this paper can be applied to any deteriorating engineering structure.

• Journal of KSNVE
• /
• v.3 no.1
• /
• pp.29-37
• /
• 1993

This study is concerned about the impact type damper for effectively restraining the high vibration amplitude in the resonance regions. The theoretical analysis is based on the assumption that the impacts occur twice per cycle at an equal time interval. Simple but reasonable approximations have been derived for the optimum collision clearance and maximum amplitude ratio. Using the impact dampers which is rigidly attached to the primary vibration system, we have experimented for mass ratios and restitution coefficients. The experimental results are in good agreement with theoretical results.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.4
• /
• pp.149-157
• /
• 2017

In this study, a system that precisely determines the heave of ship hull was designed using time-differenced GNSS carrier phase measurement, and the performance was examined. First, a technique that calculates precise position relative to the original position based on TDCP measurement for point positioning using only one receiver was implemented. Second, to eliminate the long-cycle drift error occurring due to the measurement error that has not been completely removed by time-differencing, an easily implementable high-pass filter was designed, and the optimum coefficient was determined through an experiment. In a static experiment based on the precise heave measurement system implemented using low-cost commercial GNSS receiver and PC, the heave could be measured with a precision of 2 cm standard deviation. In addition, in a dynamic experiment where it moved up and down with an amplitude of 48 cm and a cycle of 20 seconds, precise heave without drift error could be determined. The system proposed in this study can be easily used for many applications, such as the altitude correction of fish detection radar.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.153-160
• /
• 2009

The demand for super tall building construction is increasing worldwide. There has been a constant request for achieving early payback on investment by shortening the construction time. This pertains especially for the case of huge investment projects such as super tall building construction. It is very important to shorten the construction time for the building framework, which requires substantial construction time and cost, and this is directly related to the establishment of an optimum lift plan for construction. When there is a problem in the selection of the lift equipment, it is almost impossible to revise the selection, resulting in a possible failure of the project. Thus, the purpose of this study is to analyze the function and logic for the development of the process for the selection of lift equipment for super tall building projects and further development of making the analyzed process into a system. In line with this research objective, the process of selecting the optimum lift equipment by domestic construction company was investigated and analyzed as well as collecting the actual field data. The actual data were obtained by sensors installed on tower cranes at three construction sites with the help from the construction company.

• Journal of Welding and Joining
• /
• v.26 no.5
• /
• pp.74-78
• /
• 2008

The laser welding of the car body and components has been spread in the automotive industry. The Nd:YAG laser welding system could be used in 3D welding with robot. However, this system cannot efficiently reduce the welding cycle time according to various welding sequences because the robot's moving time is same that of the resistant spot welding system. But the remote welding system with high power $CO_2$ laser and scanner makes it possible welding cycle time much faster than the robot laser welding system. In the $CO_2$ laser remote welding system, laser beam can be rapidly transferred to a workpiece by moving mirrors of scanner system. So, it makes reducing the cycle time of welding process and shaping various welding patterns easily. Therefore, in this paper, the characteristic of weld strength according to patterns of weld bead on $CO_2$ laser welding was investigated. Also, the relationship between shape of weld bead and value of tensile load was studied. Finally, the optimum remote welding condition for car bumper was investigated.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.250-257
• /
• 2006

The objective of this study is to propose an alternative process for the small sewage treatment plants in rural communities. A biofilter has been used for biological wastewater treatment, which is becoming the alternative to the conventional activated sludge system. The proposed process used in this study, which is packed with floating media (i.e. expanded polystylene), has advantages of biofilter system and alternative flow system and they are incorporated into one process. Pilot and bench scale studies were performed using domestic wastewater. In the results of pilot plant study, it was observed that the stable effluent water quality was achieved and it met the present effluent criteria of suspended solid (SS), organic matters, T-N and T-P. In the study for determination of the cycle of backwashing, it was observed that the cycle of backwashing depended on BOD loading rates of influents. In the BOD loading rates of $0.5kg\;BOD/m^3{\cdot}day$ and $1.0kg\;BOD/m^3{\cdot}day$, the backwashing cycle of 28 hour and 16 hour were needed, respectively. The optimum backwashing time was 120~80 seconds at the media expansion rate of 50%. In the removal of SS, organic matters, T-N and T-P, SS removal was rather achieved by physical filtration than biological mechanism and the removal of organic matters except for SS, T-N and T-P were mainly rather achieved by biological mechanism than physical filtration. In bench-scale study, the effects of recirculation rate was investigated on removal of SS, TCOD, T-N and T-P. It was observed that the recirculation made removal efficiencies of SS, TCOD, T-N and T-P increased. Especially, in T-N removal, the increase of T-N removal efficiency of 40% was observed in the reicirculation rate of 1Q compared with 0Q.