• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.1
• /
• pp.47-55
• /
• 2005

Infrared heating has been traditionally used in industrial applications for processes such as dehydration of food industrial. This heating method involves the application of radiation in the wavelength range of 2 to 50 micrometers. In this work, simultaneous heat balance equations were developed to simulate the infrared radiation heating of agricultural products. The equations assume that moisture diffuses to the outer boundaries of the material in liquid form and evaporation occurs at the surface of the agricultural products. Energy for moisture evaporation is supplied by the infrared radiant energy. The optimum temperature and drying time for the best drying conditions of changing the red peppers with the moisture content of 18% and the restore rate of 80~85% are $80^{\circ}C$ and 44 hours. The performance of radiation tubes coating with the radiation paint developed in this research has the energy of $2.27{\times}103W/m^2{\mu}m$, $150^{\circ}C$ within the scope of radiation wave length of $2{\sim}30{\mu}m$ and has the radiation 0.92~0.93, which is superior to the general radiation tubes. The extinction coefficient according to the band pass filter using the 4 flux theory ha higher dependability on wave length, accounting for $2{\sim}17{\mu}m$ and $5{\times}105{\sim}106m-1$. A comparison between the theoretical energy transfer whose figures are interpreted according to 4 flux theory and the experimental energy transfer of far infrared dryer leads to the findings of the agreement less than 5%.

• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.13-19
• /
• 1999

Total reflection X-ray fluorescence spectroscopy using synchrotron radiation source called as TRSFA was explored to achieve high sensitivities to impurity metals on Si wafer surface. It consists of monochromating part to select a specific wavelength, slit part to shield direct beam and to control monochromated beam, and main chamber to dectect fluorescent X-ray counts of impurities on si wafer. Monochromated X-ray of 10.90 KeV was selected and the optimum total reflection condition on silicon wafer was obtained through tuning the dead time and fluorescent X-ray count of Si and Fe. TRSFA system could increase the sensitivity as high as 50 times in comparision with TRXFA using normal X-ray source. But the trend was varied since the surface conditions of Si wafers and, therefore, the reflectivities were different. Furthemore, there seems to be a promising path to reaching a detection limit useful to the next generation metal impurities control, because Fe impurity below to the $5\times10^{9}\textrm{atomas/cm}^2$ can be detectable through the developed TRSFA system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.210-215
• /
• 2002

This thesis is contents on the crystal grown by the solide phase method at $925^{\circ}C$ with orthorhombic structure that $LiMnO_{2}$ active material synthesised with precurse $Mn_{2}O_{3}$ and $LiOH.H_{2}O$ material to get three voltage level. The porosity analysis of the grown crystal in secondary batteries $LiMnO_{2}$ thin film is $1.323E+02\AA$ of the average pore diameter of powder particles and its structure to be taken the pore diameter was prepared. Adding voltage area to get properties of charge and discharge of which experiment result of $LiMnO_{2}$ thin film area 2.2V~4.3V, current and scan speed were 0.1mAh/g and $0.2mV/cm^{2}$ respectively, and properties of the charge and discharge to be got optimum experiment condition parameter and density rate of Li for analyze that unit discharge capacity with metal properties is 87mAh/g was 96.9[ppm] at 670.784[nm] wavelength, and density rate of Mn analyzed 837[ppm] at 257.610[nm]. It can be estimated the quality of thin film that wrong cell reject from the bottle of electrolyte. The results of SEM and XRD were the same that of original researchers.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.227-233
• /
• 1992

The simulation code was developed for the development of the split-disk geometry glass amplifier, which could design the laser apparatus and analyze the properties of the laser system. The flashlamp emission energy at the short wavelength region must be reduced, while maintaining a current density between 2000 and 4000 A/$\textrm{cm}^{2}$, in order to reduce the thermal loading in the laser glass and to raise the coupling efficiency between the emission spectrum of the flashlamps and the absorption spectrum of the laser glass. By cutting the laser glass into three equal pieces, the temperature rise in the laser glass dropped by 70% due to the efficient removal of the heat in the laser glass. It was found that the $Nd^{3+}$ doping rate of each laser glass should be properly selected and the optimum value of the product of the absorption coefficient $\alpha$ and the thickness d of the laser glass is about 0.26 in the split-disk geometry.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.505-513
• /
• 1993

To make the electrophotographic photoreceptor that srnsirizes for panchromatic matcrial, the dying element of sunfasr yellow which has an absorption ivavclength at near 400nm, and $\alpha,\beta$-copper phthalocyaninc dying elements with 700nm absorption wavelength were adsorbed and then dispersed onto the zine oxide(Zn0). In ordcr to characterize rhe change In sensitivity the various binders and different mole ratio of ZnO to binder were employed in here. It was found rhat the optimum sensitivity was obtained with 5.5 ratio. I;rom the measurements of electrostatic and spectral sensitivity, it was found that the maximum photographic properties were obtained for mixing the sunfast yellow and $\beta$-copper phthalocyaninr. In this case the electrophotographic sensiri\ity was found to he $E{1:2}$= 1440 lux . sec. And also the spectral sensitivity shows that it had a good properties for panchromatic matcrial.

• The Korean Journal of Mycology
• /
• v.15 no.4
• /
• pp.217-223
• /
• 1987

Mitochondria in the L. edodes was purified by linear sucrose density gradient centrifugation. The mitochondrial ATPase activity was investigated by various wavelength illumination for 30 min at dark state. The mitochondrial ATPase activity was stimulated 1.6 fold by 680 nm illumination compared with dark control group. The mitochondrial ATPase activity of different light illumination time at 680 nm was stimulated 2.3 fold at 5 minutes compared with dark control group. Its optimum pH and temperature were found to be 7.5 and $59^{\circ}C$ after illumination for 5 minutes at 680 nm. The mitochondrial ATPase activity was activated by 5 mmol $Fe^{3+}$, 0.1 mmol $Fe^{2+}$, 0.1 mmol $Mg^{2+}$, 0.5 mmol $K^{+}$, and 0.1 mmol $Ca^{2+}$ ion. But, the enzyme was inhibited by 5 mmol $Na^{+}$ ion.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.547-552
• /
• 2005

The study has objective in raising value of the gray color as a meaningful color suiting sentiments of modern people by expressing the gray color in various perspective utilizing natural dyes that is natural at the same time having aesthetic color tones. For example, the main ingredient used for coloring black and gray color is the pyrogallol tannin and the gray tone dye can be acquired by combining the tannin with iron. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of Gallapple pyrogallol tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of Gallapple tannin was at around 273 nm, while strong absorption was also observed at below 350 nm. Dye ability of Gallapple tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consist highly of gray tones and showed red tone after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Lightfastness was more on a normal fading. I hope this study opens up possibilities towards presenting gray color expressed from tannin as color with diversity and aesthetic value. In future, comparative study between dye expressed from catechol tannin dye materials will be helpful.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.343-348
• /
• 2006

This study aims to attain gray tone dyed goods by using tannin that is contained in green tea. Tannin is given general name of polyphenol, which has a characteristic that bonds with protein and it is used for food preservative that protects against bacteria, as well as its purpose of black tone dye for silk treatment that has been processed since its early ages. In particular, as tannin reacts with all kinds of metallic mordant and changes to various colors, when tannin acid is combined with iron, it becomes tannin steel and produces gray tone color. Tannin that is contained in green tea is condensed tannins and its structure does not hydrolyze, thus having flavan type structure. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of green tea tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of green tea tannin was at around 273nm, while strong absorption was also observed at below 350 nm. Dye ability of green tea tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consisted highly of gray tones and showed overall gray tone with the combined color of yellow and red after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased, the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Additionally, lightfastness was more on a normal fading.

• YAKHAK HOEJI
• /
• v.56 no.5
• /
• pp.280-287
• /
• 2012

A high-performance liquid chromatography (HPLC) combined with ultraviolet (UV) method for the simultaneous determination of ${\alpha}$-cyperone and nootkatone was developed for the quality control of Cyperus rotundus Linne. The separation was performed on a KR100-$5C_{18}$ ($4.6{\times}250mm$) column, and an elution gradient composed of methanol and water with a flow-rate of 1.0 ml/min. Detection wavelength was set at 254 nm. The optimum extraction for the detection of the ${\alpha}$-cyperone and nookatone was achieved by ultrasonic with methanol for an hour. Two marker compounds ${\alpha}$-cyperone and nootkatone in Cyperi Rhizoma showed good linearity ($R^2$ >0.999) in the concentration range of $12.5{\mu}g/ml$ to $200{\mu}g/ml$. The developed method provided satisfactory precision and accuracy with overall intra-day and inter-day variations of 0.04~1.23% and 0.08~0.68%, respectively, and the overall recoveries of 97.45~105.58% for the two compounds analyzed. Additionally, a difference was observed in the cluster analysis and principal component analysis between Cyperi Rhizoma in Korea and China. The result demonstrated that the principal component analysis is useful to distinguish between Cyperi Rhizoma in Korea and China.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.400-406
• /
• 2000

The fired Precursor (Y,Gd,Eu)(OH)$CO_3$.$H_2O$$900^{\circ}C$ was used to synthesize the red phosphor $(Y,Gd)_2O_3$: Eu for plasma display panel. Rounded and ~l $\mu\textrm{m}$ diameter phosphor $(Y,Gd)_2O_3$: Eu can be obtained by the reaction of aformentioned powder with a small amount addition of flux at $1350^{\circ}C$ for 2 hours. Emission spectra of these phosphors were measured under excitation wavelength at 254 nm and 147 nm and the optimum concentrations of activator ion were determined at around 15 mo1e % and 10 mole % under these conditions, respectively. $BaCO_3$flux had the best property in emission intensity among the prepared $BaCO_3AlF_3$and $Li_3PO_4$phosphors. The properties of optimized sample were improved in terms of relative luminance and color coordinate comparing with commercial phosphor such as $Y_2O_3$: Eu.