• 한국ITS학회 논문지
• /
• 제16권4호
• /
• pp.76-91
• /
• 2017

국내 철도역사는 규모설계 시 4단계 교통수요모델을 기반으로 산출된 1일간의 철도 승 하차 이용객을 기준으로 한다. 하지만 역사기능의 다양화로 비승차객 이용이 증가하고 있다. 이를 반영하여 철도역사 설계 시 비승차객 할증율을 역사 유형에 따라 적용하고 있지만, 적용기준에 대한 구체적인 근거가 미비한 상황이다. 따라서, 본 연구에서는 유형별 철도역사를 대상으로 역사 이용객의 실측자료를 바탕으로 비승차객 할증율을 재산정하고자 한다. 이후 콘코스, 편의시설, 화장실 등이 포함된 철도역사를 대상으로 보행자 시뮬레이션을 통해 설계면적의 적정성평가를 시행하였다. 실측조사에 따른 비승차객 비율을 고려한 역사 설계 시 현황 기준을 적용한 역사 대비 전체 면적이 감소(약 45%)하였음에도 불구하고 시설물 별 적정서비스수준을 만족하는 결과를 도출하였다.

• 한국항만학회지
• /
• 제7권1호
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• 한국항해학회지
• /
• 제13권1호
• /
• pp.21-53
• /
• 1989

In the past twenty years, there has been a rapid increase in the volume of traffic in Korea due to the Korean great growth of the Korean economy. Since transformation provides an infrastructure vital to economic growth, it becomes more and more an integral part of the Korea economy. The importance of coastal shipping stands out in particular, not only because of the expansion limit on the road network, but also because of saturation in the capacity of rail transportation. In spite of this increase and its importance, coastal shipping is falling behind partly because it is givenless emphasis than ocean-going shipping and other inland transportation systems and partly because of overcompetition due to excessive ship tonnage. Therefore, estimating and planning optimum ship tonnage is the first take to develop Korean coastal shipping. This paper aims to estimate the optimum coastal ship tonnage by computer simulation and finally to draw up plans for the ship tonnage balance according to supply and demand. The estimation of the optimum ship tonnage is peformed by the method of Origin -Destimation and time series analysis. The result are as follows : (1) The optimum ship tonnage in 1987 was 358, 680 DWT, which is 54% of the current ship tonnage (481 ships, 662, 664DWT) that is equal to the optimum ship tonnage in 1998. this overcapacity result is in excessive competition and financial difficulties in Korea coastal shipping. (2) The excessive ship tonnage can be broken down into ship types as follows : oil carrier 250, 926 DWT(350%), cement carrier 9, 977 DWT(119%), iron material/machinery carrier 25, 665 DWT(117%), general cargo carrier 17, 416DWT(112%). (3) the current total ship crew of 5, 079 is more than the verified optimally efficient figure of 3, 808 by 1271. (4) From the viewpoint of management strategy, it is necessary that excessive ship tonnage be reduced and uneconomic outdated vessels be broken up. And its found that the diversion into economically efficient fleets is urgently required in order to meet increasing annual rate in the amounts of cargo(23, 877DWT). (5) The plans for the ship tonnage balance according to supply and demand are as follows 1) The establishment of a legislative system for the arrangement of ship tonnage. This would involve; (a) The announcement of an optimum tonnage which guides the licensing of cargo vessels and ship tonnage supply. (b) The establishment of an organization that substantially arrangement tonnage in Korea coastal shipping. 2) The announcement of an optimum ship tonnage both per year and short-term that guides current tonnage supply plans. 3) The settlement of elastic tariffs resulting in the protect6ion of coastal shipping's share from other tonnage supply plans. 4) The settlement of elastic tariffs resulting in the protection of coastal shipping's share from other transportation systems. 4) Restriction of ocean-going vessels from participating in coastal shipping routes. 5) Business rationalization of coastal shipping company which reduces uneconomic outdated vessels and boosts the national economy. If we are to achieve these ends, the followings are prerequisites; I) Because many non-licensed vessels are actually operating and threatening the safe voyage of the others in Korea coastal routes, it is necessary that those ind of vessels be controlled and punished by the authorities. II) The supply of ship tonnage in Korean coastal routes should be predently monitored because most of the coastal vessels are to small to be diverted into ocean-going routes in case of excessive supply. III) Every ship type which is engaged in coastal shipping should be specialized according to the characteristics of its routes as soon possible.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권4호
• /
• pp.1837-1860
• /
• 2020

We propose a general framework for studying resource allocation problem and the tradeoff between spectral efficiency (SE) and energy efficiency (EE) for downlink traffic in power domain-non-orthogonal multiple access (PD-NOMA) and device to device (D2D) based heterogeneous cloud radio access networks (H-CRANs) under imperfect channel state information (CSI). The aim is jointly optimize radio remote head (RRH) selection, spectrum allocation and power control, which is formulated as a multi-objective optimization (MOO) problem that can be solved with weighted Tchebycheff method. We propose a low-complexity algorithm to solve user association, spectrum allocation and power coordination separately. We first compute the CSI for RRHs. Then we study allocating the cell users (CUs) and D2D groups to different subchannels by constructing a bipartite graph and Hungrarian algorithm. To solve the power control and EE-SE tradeoff problems, we decompose the target function into two subproblems. Then, we utilize successive convex program approach to lower the computational complexity. Moreover, we use Lagrangian method and KKT conditions to find the global optimum with low complexity, and get a fast convergence by subgradient method. Numerical simulation results demonstrate that by using PD-NOMA technique and H-CRAN with D2D communications, the system gets good EE-SE tradeoff performance.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.43-59
• /
• 2014

Many bridges are subject to lateral damage for their girders due to impact by over-height vehicles collision. In this study, the optimum configurations of carbon fiber reinforced polymers (CFRP) laminates were investigated to repair the laterally damaged prestressed concrete (PS) bridge girders. Experimental and analytical investigations were conducted to study the flexural behavior of 13 half-scale AASHTO type II PS girders under both static and fatigue loading. Lateral impact damage due to vehicle collision was simulated by sawing through the concrete of the bottom flange and slicing through one of the prestressing strands. The damaged concrete was repaired and CFRP systems (longitudinal soffit laminates and evenly spaced transverse U-wraps) were applied to restore the original flexural capacity and mitigate debonding of soffit CFRP longitudinal laminates. In addition to the static load tests for ten girders, three more girders were tested under fatigue loading cycles to investigate the behavior under simulated traffic conditions. Measurements of the applied load, the deflection at five different locations, strains along the cross-section height at mid-span, and multiple strains longitudinally along the bottom soffit were recorded. The study investigated and recommended the proper CFRP repair design in terms of the CFRP longitudinal layers and U-wrapping spacing to obtain flexural capacity improvement and desired failure modes for the repaired girders. Test results showed that with proper detailing, CFRP systems can be designed to restore the lost flexural capacity, sustain the fatigue load cycles, and maintain the desired failure mode.

• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.13-20
• /
• 2006

In cellular mobile communications, how to achieve optimum system capacity with limited frequency spectrum is one of the main research issues. Many dynamic channel assignment (DCA) schemes have been proposed and studied to allocate the channels more efficiently, thus, the capacity of cellular systems is improved. Reuse partitioning (RP) is another technique to achieve higher capacity by reducing the overall reuse distance. In this paper, we present a network-based DCA scheme with the implementation of RP technique, namely dynamic reuse partitioning with interference information (DRP-WI). The scheme aims to minimize the effect of assigned channels on the availability of channels for use in the interfering cells and to reduce their overall reuse distances. The performance of DRP-WI is measured in terms of blocking probability and system capacity. Simulation results have confirmed the effectiveness of DRP-WI scheme. Under both uniform and non-uniform traffic distributions, DRP-WI exhibits outstanding performance in improving the system capacity. It can provide about 100% capacity improvement as compared to conventional fixed channel assignment scheme with 70 system channels.

• 한국시뮬레이션학회논문지
• /
• 제3권1호
• /
• pp.151-165
• /
• 1994

Broadband network based on the Asynchronous Transfer Mode(ATM) concept are becoming the target technology for the emerging Broadband Integrated Services Digital Network(B-ISDN). Since B-ISDN is very complex and requites a great amount of investment, optimum design and performance analysis of such systems are very important. Simulation can be widely used to analyze and examine the broadband network behavior. However, for the complicated system like broadband networks it is extremely difficult and time-consuming to develop a complete model for simulation. In this paper, an object-oriented modeling approach for the broadband network simulation is presented for the effective and efficient modeling. Object-oriented approaches can provide a good structuring capability for complicated simulation models and facilitate the development of reusable and extensible simulation models. We have developed an object-oriented model which consists of object model and behavior model. In the object mode., the components of the broadband network and both constant bit rate(CBR) and variable bit rate(VBR) traffic types of call level, burst level, and cell level are modeled as object classes. In the behavior model, the dynamic features for each object class are represented using the state transition diagram. It has been shown by illustration that objectoriented modeling is an effective tool for modeling the complicated B-ISDN.

• 한국통신학회논문지
• /
• 제24권6A호
• /
• pp.803-819
• /
• 1999

본 논문은 무선 ATM 서비스를 위한 CDMA WATM 시스템을 제시하며, 매체 접속 방식으로 전송 스케줄링과 슬롯 및 무선 링크 할당 알고리즘을 가진 중앙 제어 예약 접속 방식 (CRMA/TSDA)을 제안한다. 또한, 본 논문에서는 CDMA WATM 시스템을 위한 무선 접속 및 링크 제어 방식으로 지역정보 슬롯 및 링크 할당 알고리즘과 광역정보 슬롯 및 링크 할당 알고리즘을 제안하고, 모의 실험을 통하여 양방향 링크에서의 시스템 용량과 성능을 분석하였다. 제시된 접속 방식 및 제어 방식은 기존의 CDMA 랜덤 접속 방식에 비해 만족할 만한 성능을 보이며, ATM 서비스의 요구 품질을 만족시키며 수용할 수 있다. 특히, 지역 정보 제어 방식은 준최적의 광역 정보 방식에 견줄만한 성능을 갖는다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.745-755
• /
• 2010

GTX(Great Train Express), the wide area express train of a big city center of metropolitan area, is the best new transportation method able to realize 'Low Carbon Green Growth' for solving traffic congestion of the metropolitan area with the connection the metropolitan area into 40-minute life zone by speeding up the standardized velocity, making the route straight and reducing the compensation of land using the space of 40~50m below the ground. In the transportation sector all over the world, if it turned into the public transportation system focusing on the train at a point of time that low carbon green revolution takes the initiative, national competitiveness would be enhanced by reducing the emission of carbon from cars by 1/6. Accordingly, this study is to look into the efficient operation in accordance with GTX construction superintended by currently Gyeonggi province and to consider the optimum operation plan of GTX that are proper for the actual circumstances of the country by comparatively analyzing overseas cases that took their positions as new transportation by curtailment of transit time through highspeed such as London area, Paris area, and Tokyo area etc that are similar to Korean metropolitan area.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.69-75
• /
• 2016

대화형 웹 환경에서 응용 프로그램의 성능은 고품질의 서비스를 제공하기 위한 필수적인 이슈이다. 즉, 웹 요청 트랙픽이 일시적으로 급증할 경우, 서버의 CPU 여유 시간이 부족하게 되고 결국 요청의 응답 시간이 증가하기 때문에 클라이언트에게 좋지 않은 경험을 유발하게 된다. 본 논문에서는 J2EE 응용 서버에서 설정 가능한 파라미터인 스레드 풀과 데이터베이스 연결 풀의 크기가 응용 프로그램의 성능에 끼치는 영향을 분석한다. 또한 최적의 파라미터 값을 얻기 위해서 웹 성능 분석을 위한 실험적 평가 기법을 소개한다. 마지막으로 사례 연구를 통해 성능 분석 결과를 제시한다.