• 제목/요약/키워드: Optimum Temperature

검색결과 6,352건 처리시간 0.045초

양송이 수량(收量)에 미치는 합성퇴비배지(合成堆肥培地)의 영양원(營養源), 발효(醱酵) 및 유해생물(有害生物)에 관((關)한 연구(硏究) (Studies on nutrient sources, fermentation and harmful organisms of the synthetic compost affecting yield of Agaricus bisporus (Lange) Sing)

  • 신관철
    • 한국균학회지
    • /
    • 제7권1호
    • /
    • pp.13-73
    • /
    • 1979
  • 양송이 합성퇴비(合成堆肥) 배지(培地)의 제조(製造)에 있어서 탄소원(炭素原), 질소원(窒素源) 등(等) 영양원(營養源)과 물리적(物理的) 안정(安定)을 위(爲)한 보조재료(補助材料)의 선정(選定), 볏짚을 주재료(主材料)로 사용(使用)할 때의 퇴비재료(堆肥材料)의 배합(配合), 야외퇴적(野外堆積) 및 후발효(後醱酵), 볏짚 퇴비배지(堆肥倍地)에서의 유해생물(有害生物) 발생(發生) 및 방제(防除)에 관(關)한 연구(硏究)를 수행(遂行)한 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 합성퇴비배지(合成堆肥倍地)의 탄소원(炭素原)으로서 볏짚은 보리짚과 밀짚보다 발효(醱酵)가 신속(迅速)하고 퇴비(堆肥)의 질소함량(窒素含量)이 높으며 배지(培地)의 질(質)이 양호(良好)하여 양송이 자실체(字實體) 수량(收量)이 현저(顯著)히 높았다. 2. 한국(韓國)에서 생산(生産)되는 일본형(日本型) 벼와 통일품종(統一品種等) 두 계통(系統)의 볏짚은 초형(草型) 및 이화학적(理化學的) 성질(性質)이 달라서 퇴비(堆肥)의 발효상태(醱酵狀態)에 차이(差異)가 많았다. 통일(統一)볏짚은 발효(醱酵)가 빠르게 진행(進行)되므로 퇴적기간(堆積期間)을 단축(短縮)하고 수분공급량(水分供給量)을 감소(減少)시키며 물리성(物理成) 안정재(安定材)를 첨가(添加)하여야 한다. 3. 보릿짚 퇴비(堆肥)는 볏짚퇴비(堆肥)보다 생산성(生産性)이 낮으나 보릿짚과 볏짚을 50 : 50으로 혼용(混用)하면 볏짚과 대등(對等)한 수량(收量)을 얻을 수 있었다. 4. 퇴비배지(堆肥倍地)의 전질소(全窒素), 전유기물(全有機物) 질소(窒素) 및 Amino산태(酸態), Amide태(態) Amino당태(糖態) 질소(窒素)와 자실체(字實體) 수량간(收量間)에는 각각(各各) 높은 정(正)의 상관(相關)이 있으나 Ammonia태(態) 질소(窒素)는 균사생장 및 자실체(字實體) 형성(形成)에 심(甚)히 유해(有害)하였다. 5. 볏짚을 주재료(主材料)로 사용(使用)할 때 무기태(無機態) 질소원(窒素源)으로서 요소(尿素)가 가장 좋았고 유안(硫安)과 석회질소(石灰質素)는 부적당(不適當)하였다. 요소(尿素)는 3회(回) 분시(分施)할 때 손실(損失)이 감소(減少)되고 퇴비(堆肥)의 질소함량(窒素含量)이 증가(增加)하였다. 6. 유기태영양원(有機態營養源) 중(中) 들깻묵, 참깻묵, 밀기울, 계양(鷄養) 등(等)의 첨가(添加)는 퇴비(堆肥)의 발효(醱酵)를 양호(良好)하게 하고 자실체수량(字實體收量)을 증가(增加)시켰다. 7. 들깻묵, 밀기울 등(等) 유기태영양원(有機態營養源)은 장유박(醬油粕), 이분조미료폐비(泥粉調味料廢肥) 등(等) 공장폐엽물(工場廢葉物)로서 대체(代替)하여 재배(栽培)할 수 있었다. 8. 볏짚퇴비(堆肥) 제조시(製造時) 석고(石膏)와 Zeolite를 첨가(添加)하면 과습(過濕) 및 결착(結着) 등(等)으로 인(因)한 물리성(物理性)의 악화(惡化)가 방지(防止)되며, 자실체수량(字實體收量)이 증가(增加)하는데 그 효과(效果)는 일본형(日本型) 볏짚보다 통일(統一)에서 현저(顯著)하였다. 9. 볏짚을 주재료(主材料)로 퇴비재료(堆肥材料)를 배합(配合)할 때 계양(鷄養) 10%, 깻묵 5%, 요소(尿素) $1.2{\sim}1.5%$, 석고(石膏) 1%를 첨가(添加)하고 봄재배(栽培) 때는 발열촉진(發熱促進)을 위(爲)하여 미강(米糠)을 첨가(添加)하는 것이 좋았다. 10. 볏짚배지(培地)의 야외퇴적시(野外堆積時) 적산온도(積算溫度)와 퇴비(堆肥) 부열도간(腐熱度間)에는 r=0.97의 높은 상관(相關)이 이고 적산온도(積算溫度) $900{\sim}1000^{\circ}C$일 때 자실체(字實體) 수량(收量)이 가장 많았다. 11. 퇴적기간(堆積期間)이 길어질수록 퇴비(堆肥)의 부열도(腐熱度)가 높아지고 전질소함량(全窒素含量)이 증가(增加)하고 Ammonia태(態) 질소(窒素)는 감소(減少)하였는데, 볏짚배지(培地)의 퇴적기간(堆積期間)은 봄재배(栽培) $20{\sim}25$일(日), 가을재배(栽培) 15일(日)이 적당(適當)하였고 그때의 부열도(腐熱度)는 각각 19및 24%였다. 12. 퇴비(堆肥) 후발효시(後醱酵時) 수분함량(水分含量)이 높은 퇴비(堆肥)를 진압(鎭壓) 하여 입상(入床)할 때 공기유통(空氣流通)이 감소(減少)하여 Ammonia태(態) 질소(窒素)의 잔류량(殘溜量)이 증가(增加)하고 Methane과 유기산(有機酸) 등(等) 환원성(還元性) 물질(物質)의 생성(生成)이 많았다. r=-0.76, 휘발성(揮發性) 유기산(有機酸)과는 r=-0.73의 부(負)의 상관(相關)이 있었다. 13. 입상시(入床時) 퇴비(堆肥)의 수분함량(水分含量) $69{\sim}80%$ 범위(範圍)에서 자실체(字實體) 수량(收量)은 수분함량(水分含量)이 증가(增加)할수록 감소(減少)하였는데 (r=-0.78) 이것은 공극량(孔隙量)의 감소(減少)에 기인(基因)하는 것이었다. 입상시(入床時) 균상(菌床)의 적정 공극량(孔隙量)은 $41{\sim}45%$. 14. 후발효(後發效) 정열(頂熱)은 병해충 방제(防除) 뿐 아니고 Ammonia의 제거(除去)를 위(爲)해서 필수적(必須的) 과정(科程)이며 정열후(情熱後) 4일간(日間)의 발효(發效) 과정(科程)이 필요(必要)하였다. 15. 볏짚 퇴비배지(堆肥倍地)에서 양송이 균(菌)에 유해(有害)한 영향(影響)을 미치는 사장균 10종(種)이 동정(同定)되었는데 그 중(中) Diehliomyces microsporus, Trichoderma spp.,Stysanus stemoitis 등(等)은 발생빈도(發生頻度)가 높고 피해(被害)가 심(甚)하였다. 16. Diehliomyces는 재배사(栽培舍) 온도조절(溫度調節), Basamid와 Vapam처리(處理)로서 방제(防除)가 가능(可能)하며 Trichoderma spp.는 Bavistin과 Benomyl 철포(撤布)로서 방제(防除)되었다. 17. 퇴비중(堆肥中) 서식(棲息)하여 양송이를 가해(加害)하는 4종(種)의 선충과 5종(種)의 응애(類)는 퇴비(堆肥)를 $60^{\circ}C$에서 6시간(時間) 정열(頂熱)시키므로서 방제(防除)할 수 있었다.

  • PDF

한국에서의 벼 줄무늬잎마름병의 발생, 피해, 기주범위, 전염 및 방제에 관한 연구 (Studies on the Occurrence, Host Range, Transmission, and Control of Rice Stripe Disease in Korea)

  • 정봉조
    • 한국응용곤충학회지
    • /
    • 제13권4호
    • /
    • pp.181-204
    • /
    • 1974
  • 우리나라에서의 벼 줄무늬잎마름병의 발생, 피해, 기생범위, 전염 및 방제에 관하여 1965년부터, 1974년까지 실시한 연구결과를 다음과 같이 보고한다. 1. 발생 못자리에서 줄무늬잎마름병의 피해는 $1.3-8\%$였고 포장에서는 입도중의 발병주율보다 재생도에서의 발생율이 높았으며 보통기재배보다도 조기재배에서 발병이 많았다. 또 포장에서 발병주의 분포는 대체로 휴반가까이에 많은 경향이었다. 벼 엽기별 피해에서 라병성인 일본계 벼의 경우 못자리 때인 3엽기에서 7엽기까지는 감염되면 $100\%$ 고사하였으며 9엽기에서는 $50\%$, 11엽기는 $20\%$, 13엽기 이후에는 고사주를 볼 수 없었다. 참복기간은 3-7엽기에서는 7-15일이었고 9-15엽기에서는 15-30일이었다. 저항성인 통일벼의 경우 1.5-5엽기 접종구는 비교적 발병이 많았으나 9엽기 이후부터는 현저히 떨어져 15엽기 이후는 발병을 거의 볼 수 없었다. 그리고 감염된 것은 초장이 짧고 등숙율과 임실비율이 떨어지는 경향이었다. 2. 기주범위 기주범위를 구명하기 위하여 작물과 목초 및 잡초 36종을 공시하여 아래와 같이 21종의 기주를 밝혀 내었다. 작물: 벼, 보리, 밀 , 귀리, 라이맥, 조, 옥수수, 기장, 참피 목초: 티모시, 빗살대, 이타리안라이그라스, 패래니 알라이그라스, 죤슨그라스, 슈단그라스 잡초 : 들피, 겨피, 방울피, 잠자리피, 개미피, 바랭이, 민바랭이, 좀바랭이, 방동사니대가리, 강아지풀, 비노리, 참새, 포아풀, 독새풀, 우산대바랭이, 개보리, 겨풀, 쇠풀, 조개풀, 넓은 잎 개수염은 새로운 기주로 밝혀졌다. 3. 충매전염 우리나라의 애멸구화기는 5회였으며 수원에서의 제2회성충 최성기는 6월 20일 경이고 제3회성충 최성기는 7월 30일 경이었다. 진주는 수원보다 제2회성충 최성기가 5-7일 빨랐고 진주에서는 제3회성충 최성기의 발생량이 많은 것이 달랐다. 애멸구 세대별 보독충율은 월동약충이 $10-15\%$였고 제1세대유충은 $9\%$, 제2회성충은 $17\%$, 제2세대유충은 $8\%$, 나머지 화기에서는 약 $10\%$였는데 보독충율은 남부지방보다 높은 경향이었다. 1966년부터 1970년생 사이의 애멸구 보독충율은 해에 따라 다소 차가 있었으며 화기별로는 제2회성충과 제3회성충의 보독충율이 높았다. 분리한 애멸구보독충을 재분리하여 이를 교배하였더니 차대에서는 보독충율이 $90\%$인 애멸구를 얻을 수 있었으며 애멸구충령별로는 3, 4, 5령충의 감염능력이 높았고 애멸구 무독충의 바이러스 재획득율은 평균$7.9\%$였고 여기에서 얻어진 친화성계통이라 할지라고 3회접종시험결과 계속하여 3회까지 벼에 바이러스를 매개하지 않았다. 또 애멸구보독충의 감염최적온도는 $25-30^{\circ}C$였으며, $15^{\circ}C$이하에는 감염이 일어나지 않을때도 있었다. 그리고 애멸구기생봉의 기생율은 6월부터 8월말까지 $5-48\%$였으며 7월 10일경이 $32-48\%$로서 가장 높았다.

  • PDF

흑토란의 식품재료화를 위한 숙성 조건에 따른 토란의 특성 및 관능 최적화 (Characteristics and Sensory Optimization of Taro (Colocasia esculenta) under Different Aging Conditions for Food Application of Black Taro)

  • 전유호;이지원;손양주;황인경
    • 한국식품과학회지
    • /
    • 제48권2호
    • /
    • pp.133-141
    • /
    • 2016
  • 토란은 풍부한 영양 성분과 다양한 효능을 가지고 있으나 활용도가 높지 않고, 옥살산 등의 독성 성분과 높은 수분 함량을 가지며 갈변 현상이 쉽게 일어나기 때문에 상품화를 위해서는 새로운 가공 방법에 대한 연구가 필요하다. 본 연구에서는 토란을 증자, 숙성, 건조하는 과정을 통해 차로 음용할 뿐만 아니라 다양한 식품 재료로 활용할 수 있는 새로운 가공 방법을 개발하고자 하였으며, 이를 흑토란이라 명명하였다. 흑토란을 제조하기 위하여 증자($95{\pm}3^{\circ}C-1\;h$) 후 다양한 조건(85, 90, $95^{\circ}C-20$, 40, 60 h)에서 숙성시켰으며, 이를 건조($60^{\circ}C-24h$)하여 분말화하였다. 그 후, 이화학적 특성, 산화방지 활성을 분석하였으며, 반응표면분석을 이용하여 관능적 최적점을 탐색하였다. 토란의 일반성분 분석 결과, 생토란은 87.69%의 수분 함량을 보였고 증자 시 90.70%으로 증가하였다가 흑토란에서 4.87-8.56%로 감소하였다. 흑토란은 생토란과 증자 토란에 비해 탄수화물, 조단백, 조지방, 조회분 함량이 모두 증가하였으며, 조섬유는 생토란에서 0.45%, 흑토란에서 5.23-7.86%의 함량을 나타내었다. 무기질 성분 분석 결과, 모든 시료에서 포타슘 함량이 가장 높았다. 토란의 총당과 함량 결과, 생토란은 112.53 mg/g, 증자 토란은 70.51 mg/g을 나타냈으며, 흑토란은 숙성 시간에 따라 유의적으로 증가하였고 54.94-120.03 mg/g의 함량을 보였다. 환원당은 42.48 mg/g에서 증자 후 12.29 mg/g로 감소하였으며, 흑토란에서 12.73-24.14 mg/g의 함량을 나타내었다. 분말색도는 생토란을 열처리함에 따라 L값이 84.57에서 증자 토란의 71.05, 그리고 흑토란에서 47.91-55.28으로 감소하였으며, a값은 증가하고 b값은 감소하는 경향을 나타내었다. 갈색도는 생토란에서 0.08의 값을 나타냈고, 증자 후 0.02로 감소하였다가 흑토란에서 급격하게 증가하였으며 $90^{\circ}C$에서 40시간 숙성한 토란에서 0.88의 가장 높은 값을 보였다. 옥살산칼슘 함량 측정 결과, 생토란에서 59.07 mg/100 g의 함량을 보였으며, 증자 후 37.20 mg/100 g으로 감소하였고, 숙성 과정을 거치며 시간에 따라 유의적으로 감소하여 $90^{\circ}C$에서 60시간 숙성시킨 토란에서 11.46mg/100 g의 가장 낮은 값을 보였다. 흑토란의 총 폴리페놀 함량을 측정한 결과, 20.61-28.30 mg GAE/g의 값을 나타냈으며, 숙성 온도에 따라서 폴리페놀 함량이 유의적으로 증가함을 확인하였다. 흑토란의 산화방지 활성을 DPPH, ABTS 자유라디칼 소거능 및 FRAP 활성으로 측정하였다. DPPH와 ABTS 라디칼 소거능 모두 숙성 온도가 높아짐에 따라 증가하는 경향을 보였다. DPPH 라디칼 소거능은 3.67-7.52 mg VCE/g의 값을, ABTS 라디칼 소거능은 9.63-20.32 VCE/g의 값을 나타냈으며, 두 소거능 모두 $95^{\circ}C$에서 60시간 숙성시킨 시료에서 가장 높았다. FRAP 활성 또한 유사한 경향을 보였고, 3.43-6.79 mg VCE/g의 값을 나타내었다. 흑토란의 관능 최적 숙성 조건을 탐색하기 위하여 색, 맛, 향, 전체적인 기호도에 대하여 반응표면분석을 실시하였다. 색($R^2=0.8471$), 맛($R^2=0.8244$), 전반적인 기호도($R^2=0.7480$)에 대하여 유의한 반응 표면을 이끌어낼 수 있었으며, 맛과 전반적인 기호도 항목에서 실험 범위 내의 최적점을 이끌어낼 수 있었다(맛: $88.73^{\circ}C$, 39.50시간, 전반적인 기호도: $88.82^{\circ}C$, 42.60시간). 관능 특성간의 상관 분석 결과, 전반적인 기호도에는 색, 맛, 향 모두 영향을 미치는 것으로 나타났으며, 맛(r=0.884)의 영향이 가장 큰 것으로 나타났다. 본 연구를 통해 토란의 숙성 조건에 따른 이화학적 특성 및 산화방지 활성의 차이를 확인하였으며, 관능적으로 최적이 되는 토란의 숙성 조건을 확인하였다. 실험 결과를 종합해 보았을 때, 생토란에 비해 흑토란에서 섬유소 함량의 증가, 옥살산칼슘의 유의적인 감소, 그리고 갈변 반응으로 인한 생리활성 성분의 증가 효과를 기대할 수 있다. 높은 산화방지 효과를 위해서는 높은 온도에서 오랜 시간 숙성이 필요하며, $88.73-88.82^{\circ}C$의 온도에서 39.50-42.60시간 동안 숙성시켰을 시 관능적으로 우수한 흑토란을 생산할 수 있을 것으로 사료된다. 본 연구는 토란의 이용성을 증대시키며 흑토란 분말의 다양한 식품재료로서의 활용 가능성을 탐색하기 위한 기초 자료가 될 것으로 기대된다.

돼지 액상정액의 정자 주입농도가 서로 다른 체외성숙배지에서 배양된 난포란의 체외수정에 미치는 영향 (Effect on In­Vitro Fertilization of Pig Oocytes Matured in Different In­Vitro Maturation Media according to Sperm Concentration of Liquid Boar semen)

  • 박창식;이영주;고현진;양창범;손동수;서길웅;이규승
    • 한국가축번식학회지
    • /
    • 제26권1호
    • /
    • pp.1-7
    • /
    • 2002
  • 본 연구는 mTCM-199, mWaymouth MB 752/1 그리고 NCSU-23 성숙배지에서 성숙시킨 난포란을 mTBM 수정배지에서 액상정액의 정자를 이용하여 주입정자 농도별로 체외 수정시킴으로써 액상정액을 이용한 새로운 체외수정 방법을 개발하고자 실시하였다. 미성숙 난포란은 0.5 $m\ell$의 성숙배지에 각 well 당 30~40개씩 적하하였다. 액상정액 제조용 정액은 90% 이상의 운동성을 가진 농후정자부분을 사용하였으며 정액채취 후 2시간 동안에 22~24$^{\circ}C$의 실온까지 냉각시켰다. 실온까지 냉각한 정액은 BTS 희석액으로 2$\times$$10^{8}$ $m\ell$ 정자농도로 조정하여 100$m\ell$ 플라스틱병에 30 $m\ell$씩 주입하여 17$^{\circ}C$에서 5일 보관하였다. 5일 보관후 운동성이 70% 이상인 정자를 체외수정에 이용하였다. 38.5$^{\circ}C$, 5% $CO_2$, 95% 공기로 조절된 CO2 배양기에서 44시간 성숙 후 cumulus cell들이 제거된 성숙 난포란은 0.5 $m\ell$의 mTBM 수정배지에 30~40개씩 적하하고 최종정자농도를 1, 2, 4, 6 그리고 10$\times$$10^{6}$$m\ell$되도록하여 주입하고 6시간 동안 수정시켰다. 체외수정시킨 수정란들은 수정 후 6시간 동안 0.5$m\ell$의 NCSU-23 배양배지에서 배양한 후 정자침입율, 다정자침입율 그리고 웅성전핵 형성율을 조사하였다. mTCM-199, mWaymouth MB 752/1 그리고 NCSU­23 성숙배지에서 성숙시킨 난포란을 mTBM 수정배지에서 액상정 액으로 체외수정 한 결과 NCSU-23 성숙배지에서 성숙한 난포란이 웅성전핵형성율이 높았고 다정자침입율이 낮았다. NCSU-23 성숙배지에서 성숙한 난포란을 mTBM 수정배지에서 수정할 경우 최적정자농도는 2~4$\times$$10^{6}$$m\ell$이었으며, 정자침입율은 50.8~50.9%, 다정자침입율은 13.3~19.5% 그리고 웅성전핵형 성율은 43.9~45.4%였다. 결론적으로 NCSU-23 성숙배지에서 성숙되고 mTBM 수정배지에서 수정된 난포란은 mTCM-199이나 mWaymouth MB 752/1 성숙배지에서 성숙되고 mTBM 수정배지에서 수정된 난포란보다 우수한 체외수정 결과를 나타내었다. 17$^{\circ}C$에서 5일 동안 보존한 액상정액으로 NCSU-23 배지에서 성숙한 난포란을 체외수정하기 위한 최적정자농도는 2~4$\times$$10^{6}$$m\ell$이었다.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

남대양산 크릴의 이용에 관한 연구 (STUDIES ON THE UTILIZATION OF ANTARCTIC KRILL 2. Processing of Paste Food, Protein Concentrate, Seasoned Dried Product, Powdered Seasoning, Meat Ball, and Snack)

  • 박영호;이응호;이강호;변재형;김세권;김동수
    • 한국수산과학회지
    • /
    • 제13권2호
    • /
    • pp.65-80
    • /
    • 1980
  • 크릴을 원료로 하여 품에 대한 화학적 및 관능적 평가를 포함하는 일련의 실험을 하여 얻은 결과를 요약하면 다음과 같다. 1. krill paste의 제조에 있어서 krill juice는 $71\%$, krill scrap는 $29\%$의 수율을 나타내었으며, krill juice에서 분리한 krill paste는 $53\%$, krill broth는 $47\%$의 수율을 나타내었다. Krill paste의 아미노산 조성은 proline, glutamic acid, aspartic acid, lysine 및 leucine의 함량이 많았고, histidine, methionine, tyrosine, serine 및 threonine의 함량이 적었으며 필수아미노산에 있어서는 leucine 및 lysine의 함량이 높았고 methionine의 함량이 낮았다. 2. 크릴분말단백질의 제조에 있어 최적가공조건은 원료에 대하여 10배량의 $90\%$ isopropyl alcohol나 ethyl alcohol을 가하여 $80\%$에서 5분간 추출하는 조작을 5회 반복하는 것이었다. 추출용제로서는 ethyl alcohol 보다 isopropyl alcohol이 양호하였으며, 크릴분말단백질의 수율은 생동결크릴의 경우는 isopropyl alcohol 추출때가 $10.2\%$ ethyl alcohol 추출때는 $8.8\%$였고, 자숙동결크릴의 경우는 각각 $13.0\%$$11.8\%$였다. 크릴분말단백질의 아미노산조성은 생육질부의 아미노산조성과 거의 비슷하였다. 한편 크릴분말단백질을 첨가한 국수를 제조하여 관능검사를 한 결과, 원료 밀가루에 대하여 $3\%$까지 첨가 한 것이 국수 품질에 큰 영향을 주지않고 단백질을 강화할 수 있다고 판정하였다. 3. 크릴조미조림품의 품질은 전반적으로 볼 때 열풍건조크릴을 원료로 한 것이 가장 양호하였고, 다음이 일건크릴을 원료로 했을 때이며, 자숙냉결크릴을 원료로 한 것이 가장 못 하였다. 4. 크릴의 건조분말에 볶은참깨가루, 소금, 분말우육엑스, monosodium glutamate, 고추가루 및 후추가루를 각종 비율로 배합하여 분말조미료를 만들 었을 때의 품질은 색택에 있어서는 열풍건조크릴을 사용한 것이 양호하였고, 냄새는 일건크릴을 원료로 한 것이 양호하였으며, 열탕에 녹였을 때의 풍미는 sample B(크릴함량 $77\%$)가 가장 적당하였다. 5. 크릴 및 조기를 각종 비율로 배합하고 여기에 일정량의 밀가루, monosodium glutamate 및 소금을 첨가하여 krill meat ball을 만들어 그 색택, 맛 냄새, texture 및 젤리강도 등에 대하여 관능검사를한 결과, 크릴의 첨가량이 $25\%$까지의 제품이 양호하였으며, 생동결 및 자숙동결크릴을 원료로 했을 때의 품질차는 인정할 수 없었다. 6. 크릴, $\alpha$-전분, 고구마전분, 설탕, 소금, monosodium glutamate, glycine, 주석산칼리, 중탄산암모늄 및 중탄산소오다를 각종 비율로 배합하여 크릴${\cdot}$스낵${\cdot}$과자를 만들어 품질을 비교 검토한 결과 sample B(크림함량 $7.1\%$) 및 sample C(크릴함량 $10.8\%$)서 가장 양호하였다. 크릴${\cdot}$스낵${\cdot}$과자의 제조에 있어서 각종 전분의 가공적성을 시험한 결과 고구마전분이 가장 양호하였고 다음이 옥수수전분, 갈분의 순이었으며, 밀가루가 가장 못 하였다. 튀김방법은 소금튀김에 비하여 기름튀김이 좋은 결과를 나타내있고, 튀김온도는 $210\~215^{\circ}C$가 적당하였다.

  • PDF

Sesquiterpenoids Bioconversion Analysis by Wood Rot Fungi

  • Lee, Su-Yeon;Ryu, Sun-Hwa;Choi, In-Gyu;Kim, Myungkil
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2016년도 춘계학술대회 및 임시총회
    • /
    • pp.19-20
    • /
    • 2016
  • Sesquiterpenoids are defined as $C_{15}$ compounds derived from farnesyl pyrophosphate (FPP), and their complex structures are found in the tissue of many diverse plants (Degenhardt et al. 2009). FPP's long chain length and additional double bond enables its conversion to a huge range of mono-, di-, and tri-cyclic structures. A number of cyclic sesquiterpenes with alcohol, aldehyde, and ketone derivatives have key biological and medicinal properties (Fraga 1999). Fungi, such as the wood-rotting Polyporus brumalis, are excellent sources of pharmaceutically interesting natural products such as sesquiterpenoids. In this study, we investigated the biosynthesis of P. brumalis sesquiterpenoids on modified medium. Fungal suspensions of 11 white rot species were inoculated in modified medium containing $C_6H_{12}O_6$, $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ for 20 days. Cultivation was stopped by solvent extraction via separation of the mycelium. The metabolites were identified as follows: propionic acid (1), mevalonic acid lactone (2), ${\beta}$-eudesmane (3), and ${\beta}$-eudesmol (4), respectively (Figure 1). The main peaks of ${\beta}$-eudesmane and ${\beta}$-eudesmol, which were indicative of sesquiterpene structures, were consistently detected for 5, 7, 12, and 15 days These results demonstrated the existence of terpene metabolism in the mycelium of P. brumalis. Polyporus spp. are known to generate flavor components such as methyl 2,4-dihydroxy-3,6-dimethyl benzoate; 2-hydroxy-4-methoxy-6-methyl benzoic acid; 3-hydroxy-5-methyl phenol; and 3-methoxy-2,5-dimethyl phenol in submerged cultures (Hoffmann and Esser 1978). Drimanes of sesquiterpenes were reported as metabolites from P. arcularius and shown to exhibit antimicrobial activity against Gram-positive bacteria such as Staphylococcus aureus (Fleck et al. 1996). The main metabolites of P. brumalis, ${\beta}$-Eudesmol and ${\beta}$-eudesmane, were categorized as eudesmane-type sesquiterpene structures. The eudesmane skeleton could be biosynthesized from FPP-derived IPP, and approximately 1,000 structures have been identified in plants as essential oils. The biosynthesis of eudesmol from P. brumalis may thus be an important tool for the production of useful natural compounds as presumed from its identified potent bioactivity in plants. Essential oils comprising eudesmane-type sesquiterpenoids have been previously and extensively researched (Wu et al. 2006). ${\beta}$-Eudesmol is a well-known and important eudesmane alcohol with an anticholinergic effect in the vascular endothelium (Tsuneki et al. 2005). Additionally, recent studies demonstrated that ${\beta}$-eudesmol acts as a channel blocker for nicotinic acetylcholine receptors at the neuromuscular junction, and it can inhibit angiogenesis in vitro and in vivo by blocking the mitogen-activated protein kinase (MAPK) signaling pathway (Seo et al. 2011). Variation of nutrients was conducted to determine an optimum condition for the biosynthesis of sesquiterpenes by P. brumalis. Genes encoding terpene synthases, which are crucial to the terpene synthesis pathway, generally respond to environmental factors such as pH, temperature, and available nutrients (Hoffmeister and Keller 2007, Yu and Keller 2005). Calvo et al. described the effect of major nutrients, carbon and nitrogen, on the synthesis of secondary metabolites (Calvo et al. 2002). P. brumalis did not prefer to synthesize sesquiterpenes under all growth conditions. Results of differences in metabolites observed in P. brumalis grown in PDB and modified medium highlighted the potential effect inorganic sources such as $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ on sesquiterpene synthesis. ${\beta}$-eudesmol was apparent during cultivation except for when P. brumalis was grown on $MgSO_4$-free medium. These results demonstrated that $MgSO_4$ can specifically control the biosynthesis of ${\beta}$-eudesmol. Magnesium has been reported as a cofactor that binds to sesquiterpene synthase (Agger et al. 2008). Specifically, the $Mg^{2+}$ ions bind to two conserved metal-binding motifs. These metal ions complex to the substrate pyrophosphate, thereby promoting the ionization of the leaving groups of FPP and resulting in the generation of a highly reactive allylic cation. Effect of magnesium source on the sesquiterpene biosynthesis was also identified via analysis of the concentration of total carbohydrates. Our current study offered further insight that fungal sesquiterpene biosynthesis can be controlled by nutrients. To profile the metabolites of P. brumalis, the cultures were extracted based on the growth curve. Despite metabolites produced during mycelia growth, there was difficulty in detecting significant changes in metabolite production, especially those at low concentrations. These compounds may be of interest in understanding their synthetic mechanisms in P. brumalis. The synthesis of terpene compounds began during the growth phase at day 9. Sesquiterpene synthesis occurred after growth was complete. At day 9, drimenol, farnesol, and mevalonic lactone (or mevalonic acid lactone) were identified. Mevalonic acid lactone is the precursor of the mevalonic pathway, and particularly, it is a precursor for a number of biologically important lipids, including cholesterol hormones (Buckley et al. 2002). Farnesol is the precursor of sesquiterpenoids. Drimenol compounds, bi-cyclic-sesquiterpene alcohols, can be synthesized from trans-trans farnesol via cyclization and rearrangement (Polovinka et al. 1994). They have also been identified in the basidiomycota Lentinus lepideus as secondary metabolites. After 12 days in the growth phase, ${\beta}$-elemene caryophyllene, ${\delta}$-cadiene, and eudesmane were detected with ${\beta}$-eudesmol. The data showed the synthesis of sesquiterpene hydrocarbons with bi-cyclic structures. These compounds can be synthesized from FPP by cyclization. Cyclic terpenoids are synthesized through the formation of a carbon skeleton from linear precursors by terpene cyclase, which is followed by chemical modification by oxidation, reduction, methylation, etc. Sesquiterpene cyclase is a key branch-point enzyme that catalyzes the complex intermolecular cyclization of the linear prenyl diphosphate into cyclic hydrocarbons (Toyomasu et al. 2007). After 20 days in stationary phase, the oxygenated structures eudesmol, elemol, and caryophyllene oxide were detected. Thus, after growth, sesquiterpenes were identified. Per these results, we showed that terpene metabolism in wood-rotting fungi occurs in the stationary phase. We also showed that such metabolism can be controlled by magnesium supplementation in the growth medium. In conclusion, we identified P. brumalis as a wood-rotting fungus that can produce sesquiterpenes. To mechanistically understand eudesmane-type sesquiterpene biosynthesis in P. brumalis, further research into the genes regulating the dynamics of such biosynthesis is warranted.

  • PDF

밭 작물(作物)의 가리(加里) 생리(生理) (Potassium Physiology of Upland Crops)

  • 박훈
    • 한국토양비료학회지
    • /
    • 제10권3호
    • /
    • pp.103-134
    • /
    • 1977
  • 밭 작물에 대(對)한 칼리의 생리(生理) 및 생화학적(生化學的) 역할(役割)을 최근(最近) 연구결과(硏究結果)를 중심(中心)으로 검토(檢討)하였으며 우리나라 밭 작물(作物)의 가리영양(加里營養) 현황(現況)을 살펴봤다. 칼리이온의 물리화학적(物理化學的) 특성(特性)은 Na에 의(依)하여 완전(完全) 대체(代替) 불가능(不可能)함을 보이며 대부분(大部分)의 작물(作物)에서 Na의 K대체(代替)는 불가피(不可避)한 대체기능(代替機能)에 대(對)한 부분적(部分的) 대체(代替)에 불과(不過)한 것 같다. 칼리의 특이성(特異性)은 엽록체(葉綠體) thylacoid막(膜)과 같은 미세구조(微細構造)를 효율적(效率的) 구조(構造)로 유지(維持)하며 주(主)로 탄수화물(炭水化物)과 단백질(蛋白質) 대사(代謝)에 관계(關係)하는 제효소(諸酵素)들의 allosteric effector로, 효율적(效率的) conformation의 유지자(維持者)로 작용(作用)하는 것으로 보였다. 광인산화(光燐酸化) 반응(反應)과 산화적(酸化的) 인산반응(燐酸反應) 등(等) energy 대사(代謝)에 필수적(必須的) 존재(存在)로서 유기물(有機物)의 합성(合成)과 전류등(轉流等) 광범(廣範)한 energy 의존(依存) 생리작용(生理作用)에 관여(關與)하고 있다. 칼리는 삼투압(渗透壓) 및 교질(膠質)의 가수도(加水度)를 유지(維持)하여 수분흡수(水分吸收) 및 전류(轉流)의 동인(動因)으로 작용(作用)하여 생리작용(生理作用)의 최적환경(最適環境)을 만들며 수분효율(水分效率)을 높인다. 칼리는 무기양분(無機養分)의 흡수(吸收)와 체내분포(體內分布)에 영향(影響)을 주고 생산물의 품질향상(品質向上)에도 영향을 주며 생산품의 K함량자체(含量自體)가 인체(人體)에서의 K의 중요성(重要性)으로 품질평가(品質評價)의 기준(基準)이 될 것 같다. 칼리의 흡수(吸收)는 저온(低溫)에 의(依)해 크게 저해(沮害)받으며 내부(內部) 칼리 함량에 의(依)한 부(否)의 feedback기작(機作)이 있어서 칼리의 사치흡수는 재평가(再評價)되어야 할 것으로 보였다. 우리나라 토양(土壤)의 전가리(全加里)는 약(約) 3%이나 치환성(置換性)은 0.3me/100g으로 동해(凍害), 한해(寒害)와 불균일(不均一)한 강우(降雨)로 인(因)한 습해(濕害), 한해(旱害) 등(等)으로 모든 밭 작물(作物)에서 요구도(要求度)가 컸다. 대맥(大麥)은 결빙직전(結氷直前) 및 해빙(解氷) 직후(直後)의 K영양(營養)이 수량(收量)과 유의성(有意性) 상관(相關)을 보이며 곡실(穀實)로 많이 전류(轉流)되는 것이 좋았다. 대맥(大麥)의 가리이용률(加里利用率)은 27%, 대두(大豆)는 숙전(熟田)에서 58% 개간지(開墾地)에서 46%였다. 대두(大豆)는 야산(野山) 개발지(開發地)에서 특(特)히 가리(加里) 결핍증상(缺乏症狀)을 많이 보였으며 화아분화기(花芽分花期)에 엽(葉) 중(中) $K_2O$ 2% 이상(以上) K/(Ca+Mg) (함량비(含量比))비(比)는 1.0 이상(以上)이어야 할 것 같다. 고구마는 가리흡수력(加里吸收力)이 커서 후작(後作)의 K영양(營養)에 크게 영향(影響)을 주었다. 감자와 옥수수는 Ca와 Mg에 비(比)해 K가 특히 높았다. 가리결핍(加里缺乏) 고구마는 뿌리에서 K농도 차이가 가장 컸다. 당근, 가지, 배추, 고추, 무우, 도마도가 가리(加里) 함량(含量)이 많았으며 배추 수량(收量)은 가리(加里)와 정상관(正相關)이었다. 사료작물(飼料作物)의 가리(加里) 함량(含量)은 비교적(比較的) 높은 편이었으며 식물체(植物體) 중(中) N, P, Ca와 유의정상관(有意正相關)을 보였다. 과수원(果樹園)의 16~25%가 가리(加里) 부족(不足)으로 나타났으며 우량(優良) 사과밭과 배밭의 토양(土壤)과 엽(葉)은 가리(加里) 함량(含量)이 높았다. 뽕나무의 동해(凍害)에 의(依)한 가지 끝 고사방지(枯死防止)를 위(爲)한 엽(葉) 중(中) $K_2O/(CaO+MgO)$ 임계치(臨界値)는 0.95이었다. 밭 작물재배(作物栽培) 뒤의 토양(土壤) 중(中) 가리(加里)는 전작(前作)에 따라 증가(增加)되는 경우와 감소(減少)되는 경우가 있으며 가리(加里) 흡수(吸收)는 토양수분(土壤水分)에 존재(依存)하는 것 같다. 따라서 토양(土壤) 중(中)의 전가리(全加里)를 포함한 형태별(形態別) 가리(加里) 함량(含量)의 토질(土質), 기상(氣象), 작부체계(作付體系) 등(等) 제요인(諸要因)과 관련(關聯) 장기적(長期的)이고 정량적(定量的)인 조사(調査)가 필요(必要)하다. 가리(加里)의 추비(追肥), 심층시비(深層施肥) 또는 완용성(緩溶性) 비료(肥料)와 입상비료(粒狀肥料) 등(等)이 강우양상(降雨樣相)과 관련(關聯) 검토(檢討)됨으로써 K흡수(吸收) 및 효율(效率)을 증진(增進)시킬 수 있을 것 같다. 가리영양(加里營養)을 포함하여 밭 작물(作物)의 영양해석(營養解析)에는 다요인분석(多要因分析)에 의(依)한 합리적(合理的)이고 실용적(實用的)인 영양지표(營養指標)를 찾는데 경주(傾注)해야 할 것 같다.

  • PDF

쌀 품질 고급화 및 고부가가치화를 위한 육종현황과 전망 (Current Status and Perspectives in Varietal Improvement of Rice Cultivars for High-Quality and Value-Added Products)

  • 최해춘
    • 한국작물학회지
    • /
    • 제47권
    • /
    • pp.15-32
    • /
    • 2002
  • 1980-'90년대에 쌀의 자급생산이 지속되고 생활수준 향상에 따른 양질미 수요가 점증되면서 자포니카 다수성 품종의 미질 개선에 힘을 크게 기울이게 되었고 식미향상을 위한 육종연구 와 효율적 평가 기술개발 연구에 박차를 가하게 되어 쌀의 이화학적 특성과 식미 및 밥 물리성간 상관과 식미의 객관적 평가방법 개발, 양식미 쌀 및 가공적성 특수미 개발 등 그 동안 많은 연구성과를 올리게 되었다. 1990년대에 밥맛이 매우 좋은 고품질 자포니카 품종과 대립, 심백미, 향미, 유색미 등 가공용 특수미 품종을 개발 보급하였고 식미와 용도에 대하여 식미검정계, 신속점도측정계 및 texture 분석계 등을 이용하여 검토하였다. 최근에는 아밀로스 함량이 9%로 찹쌀과 맵쌀의 중간 성질을 가진 중간찰 품종인 '백진주벼'와 배유가 보얀 멥쌀인 '설갱 벼'를 비롯하여 라이신 함량이 높은 '영안벼' 육성하여 쌀의 가공 이용성과 기능성을 한층 높혀 놓았다. 식미와 여러 가지 미질 특성간 관련성에 관한 연구 결과를 요약해 보면 다음과 같다. 쌀의 상온흡수율 및 최대흡수율은 K/Mg율 및 알칼리 붕괴도와 유의한 부의 상관성을 나타내었으며 가열흡수율이 높은 품종일수록 밥의 용적팽창률이 컸다. 수분함량이 낮은 경질인 쌀일수록 침지 20분 후의 상온흡수율과 최대흡수율이 더 높은 경향이었으며 이러한 흡수 특성은 쌀 단백질 함량이나 아밀로스 함량 및 식미와는 유의한 상관성이 없었다 취반 적정가수량은 품종에 따라 마른 쌀 무게의 1.45-l.61배의 변이를 나타내었고 평균은 1.52배였으며 알맞게 취사된 밥의 부피는 평균 쌀 부피의 2.63배가되었다. 쌀 형태, 알칼리붕괴도, 호응집성, 아밀로스 및 단백질 함량은 거의 비슷하지만 식미에 차이가 있는 자포니카 품종들을 사용하여 식미와 관련된 쌀의 이화학적 특성을 검토한 결과, 밥의 윤기와 식미 총평은 생산 연도에 따라 호화점도 특성 중 최고점도, 최저점도 및 응집점도와 밀접한 관계를 나타내었다. 밥맛이 가장 좋은 일품 벼는 쌀의 외층에 아밀로스 함량 분포가 낮고 쌀을 열탕에 담근 20분간 우러난 용출액의 요드 정색도가 낮고 증가정도도 완만하였다. 일품 벼는 밥맛이 떨어지는 동해 벼에 비해 밥알 횡단면의 주사형 전자현미경 사진에서 밥알 외층의 호화전분의 그 물망이 매우 치밀하고 속층의 전분립의 호화정도가 양호하였다. 식미총평은 식미관련 이화학적 특성과의 관계를 이용한 중회귀식에 의해 매우 높은 결정계수로 추정이 가능하였다. 밥노화의 품종간 차이는 α-amylase-iodine 법으로 비교할 수 있었는데 노화정도가 적었던 품종은 일품벼, 추청벼, 사사니시끼, 진부벼 및 고시히까리였다. 통일형 품종인 태백벼와 자포니카 품종 중 섬진벼가 비교적 밥노화가 빨랐다 일반적으로 밥맛이 좋은 품종이 밥의 노화정도가 느렸으며 찬밥의 탄력성이 큰 경향이었다. 또한 밥노화가 느렸던 품종은 최저점도가 높았고 최종점도가 낮았다 찬밥의 탄력성은 쌀의 마그네슘함량과 밥의 용적팽창률과 밀접한 관계를 나타내었다. 식은밥의 더운밥 대비 경도 변화율은 취반용출액의 고형물량과 취반용적 팽창률과 부의 상관을 나타내었다. 식미관련 주요 이화학적 특성은 밥의 노화와도 직접 간접으로 상관이 있는 것으로 평가되었다. 쌀의 여러 가지 식품 가공적성과 관련된 형태 및 이화학적 특성은 가공식품 종류에 따라 매우 다르다. 쌀 튀김성은 호응집성이 연질이거나 아밀로스 함량이 낮을수록 양호하며 지질함량이나 단백질 함량이 높으면 좋지 않은 경향이다. 심복백정도가 심할수록 튀김현미 정립률이 떨어지며 현미 강도가 높을수록 튀김률은 높은 경향이었다 쌀국수는 밀가루와 50% 혼합시에 쌀의 칼륨 및 마그네슘 함량이 높은 품종일수록 제면 총평이 낮은 경향이었고 제면이 양호한 것이 국수물의 용출고형 물량이 적은 경향이었다. 쌀빵 가공적성은 품종에 따라서 현미와 백미간에 현저한 차이를 나타내는 것이 있는데 현미에서 반죽의 부피 증가율이 큰 쌀일수록 푹신한 감이 있는 쌀방 제조가 가능하였으며 백미에서 단백질 함량이 높은 품종일수록 쌀빵이 더욱 촉촉한 느낌이 있는 경향이었다. 아밀로스 함량이 높고 호응집성이 경질인 쌀일수록 쌀빵의 탄력성이 더 높은 경향이었다. 쌀의 발효 및 양조적성은 심복백이 심한 쌀이나 새로운 돌연변이인 뽀얀 멥쌀이 홍국균이나 홍국균의 균사활착 밀도가 높고 당화 효소 역가도 높은 경향이었으며 쌀알이 대립이면서 단백질 함량이 낮은 쪽이 양조에 유리한 것으로 알려져 있다. 찰벼 품종도 여러 가지 이화학적 특성과 전분구조 특성의 차이에 따라 9개의 품종군으로 나누어 볼 수 있을 만큼 품종적 변이가 크며 이들 이화학적 및 구조적 특성간에 상호 밀접한 연관성을 나타내었으며 유과·인절미·식혜ㆍ미숫가루 등에 상당한 가공적성의 차이를 보였다. WTO 체제 출범이후 생산비와 가격 면에서 경쟁력이 약한 우리 쌀이 살아남기 위해서는 품질의 고급화와 쌀 가공식품의 다양화 및 고기능성 개발을 추구할 수밖에 없다. 따라서 이와 같은 노력은 벼 품종개발만으로 소기의 성과를 올리기 어렵고 쌀 식품의 고급화 및 다양화를 위한 여러 분야의 긴밀한 연구협력이 수반되지 않으면 안 된다.