• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.34-39
• /
• 2004

The process of energy separation in a low pressure vortex tube with compressed air as a working medium is studied in detail. Experimental data of the temperature of the cold and hot air leaving the vortex tube are presented. The variation of the maximum wall temperature along the inner surface of a vortex tube and the temperature distribution in a vortex tube provide useful information about the location of the stagnation point of the flow field at the axis of the vortex tube Analysis of the results enabled to find the optimum ratio of nozzle area and the optimum shape of an orifice. From this optimum geometric setup of a low pressure and big vortex tube the effectiveness of energy separation was better than a high pressure and small vortex tube.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.40-45
• /
• 2004

The experimental results of the G-M (Gifford-McMahon) type pulse tube refrigerators are presented in this paper. The pulse tube refrigerator, which has no moving parts at its cold section, is attractive in obtaining higher reliability, simpler construction, and lower vibration than any other small refrigerators. The objectives of this study are to develop the design technology of the G-M type pulse tube refrigerator and acquire its application methods for replacing G-M cryocooler. As a preliminary test, the refrigeration performances of the basic, orifice, and double inlet pulse tube refrigerators were investigated. The lowest temperature obtained in the one-stage pulse tube refrigerator was 34.4K and the refrigeration capacity at the optimum operation condition was 23W at 80K. And the lowest temperature of the second stage cold head in the two-stage pulse tube refrigerators was 18.3K and the refrigeration capacities at optimum condition were 0.45W at 20K and 20W at 80K, respectively. Finally, the lowest temperature obtained in the three-stage pulse tube refrigerator was 29.8K and the refrigeration capacity at the optimum operation condition was 1.3W for 40K and 5W for 70K.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.1
• /
• pp.27-31
• /
• 2013

This study was conducted to isolate and identify the fungal pathogen causing seedling rot of Lithospermum erythrorhizon Siebold & Zuccarini, and to know the optimum growing temperature for decreasing seedling rot of Lithospermum erythrorhizon. On the basis of morphological characteristics, EF-1a sequence analysis, and pathogenecity to host plant, the fungi isolated from seedling rot and seeds of Lithospermum erythrorhizon were identified as Fusarium fujikuroi, indicating that disease causing fungus is seed-borne pathogen. Optimum temperature for germination of seeds of Lithospermum erythrorhizon was $15{\sim}20^{\circ}C$, but pathogenicity of Fusarium fujikuroi was shown more readily at $25{\sim}30^{\circ}C$. These results suggested that seedling culture of Lithospermum erythrorhizon between $15^{\circ}C$ and $20^{\circ}C$ might reduce seedling rot of Lithospermum erythrorhizon caused by seed-borne pathogen Fusarium fujikuroi.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.72-79
• /
• 2002

In this study, time-dependent distributions of temperature and stresses, in the box-column welded from ultra thick plates with center segregation, has been analyzed by the commercial finite element package SYSWELD+, for several types and angles of groove. The major points of investigation are the optimum type and angle of groove that minimize weld stress specially at the center segregation, as well as temperature distribution, residual stresses and changes in the mechanical properties. The results can be summarized as follows; 1) Generally the thermal cycle at the root of groove exhibits relatively rapid cooling pattern, however, most of the other part weldment have a slow cooling pattern in all groove types. 2) Most of the micro-structures of weldment are composed of ferrite and pearlite, meanwhile we could find martensite and bainite locally a the root of the groove. 3) Optimum groove type for high heat input welding of box-column corner is a double groove type, and the optimum angle for the groove is 30~$45^{\circ}$ that minimize deformation and weld stress at the center segregation.

• BMB Reports
• /
• v.35 no.2
• /
• pp.220-227
• /
• 2002

Two aspartate aminoransferase (EC 2.6.1.1) isoenzymes (AAT-1 and AAT-2) from Lupinus albus L. cv Estoril were separated, purified, and characterized. The molecular weight, pI value, optimum pH, optimum temperature, and thermodynamic parameters for thermal inactivation of both isoenzymes were obtained. Studies of the kinetic mechanism, and the kinetics of product inhibition and high substrate concentration inhibition, were performed. The effect of some divalent ions and irreversible inhibitors on both AAT isoenzymes was also studied. Native PAGE showed a higher molecular weight for AAT-2 compared with AAT-1. AAT-1 appears to be more anionic than AAT-2, which was suggested by the anion exchange chromatography. SDS-PAGE showed a similar sub-unit molecular weight for both isoenzymes. The optimum pH (between 8,0 and 9.0) and temperature ($60-65^{\circ}C$) were similar for both isoenzymes. In the temperature range of $45-65^{\circ}C$, AAT-2 has higher thermostability than AAT-1. Both isoenzymes showed a high affinity for keto-acid substrates, as well as a higher affinity to aspartate than glutamate. Manganese ions induced an increase in both AAT isoenzymes activities, but no cooperative effect was detected. Among the inhibitors tested, hydroxylamine affected both isoenzymes activity by an irreversible inhibition mechanism.

• The Microorganisms and Industry
• /
• v.19 no.3
• /
• pp.41-45
• /
• 1993

The cultural conditions of the osmophilic red color yeasts (Strain L$_{1}$, L$_{2}$, L$_{3}$ and L$_{4}$) isolated and identified in the previous report were examined and the results obtained were as follows ; 1. The optimum medium for growth of these osmophilic red color yeasts was soy sauce medium. 2. These strains were grown exceedingly well on the medium containing 3 percent of NaCl but somewhat restrained on the medium containing 6% or more. 3. The optimum temperautre for growth of these strains was 25.deg.C and their lethal temperature was 68.deg.C(treatment for 5 minutes). 4. The optimum pH for growth of these strains was 6.0.

• 전기의세계
• /
• v.19 no.4
• /
• pp.12-17
• /
• 1970

BaO.nFe$_{2}$O$_{3}$ Powder ferrite magnet was made by sintering process. The purity of the powder were 99.6% far BaO. 99.5% for Fe$_{2}$O$_{3}$, and the grain size 1-3 micron. The Optimum mixing ratio n=4.4 the optimum density 4.8gr/cm$^{3}$ and the optimum second sintering temperature 1260.deg. C was found. The theoretical bloch wall, dimension of domain and energy per unit volume of BaFe$_{12}$O$_{19}$ were compared with pure Fe. Also, the saturation magnetization and maximum energy product were computed.d.d.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.1
• /
• pp.79-85
• /
• 1989

For the Purpose of this study, were researched the optimum condition preconditioning condition of orient tobacco leaves . The loss of 3-methyl pentanoic acid (3-MP) component of BASMA leaves in the treatment process amount to about 60% , but the loss of 3-MP At the optimum conditions of BASMA CTC treatment, the temperature was 45-$65^{\circ}C$ and the treatment time 25-35 minutes. And further, the physical properties of BASMA after CTC treatment was remarkably similar to the control's. Since VTC minimized the loss, it is suggested that CTC method should be changed by VTC method.

• Journal of the Korean Society of Safety
• /
• v.3 no.1
• /
• pp.37-45
• /
• 1988

This research investigated the condition for plant design on reclamation of waste plastic by heat decomposition. The results were summarized as follows 1. The highest of oil product by heat decomposition is about 54.7％. 2. The optimum reaction temperature is about 300­40$0^{\circ}C$. 3. The optimum reaction time is 2­3 hours. 4. When the flow rate of 8­16 cm/sec in column reactor the yield is maximum. 5. Waste plastics yielded of carbon black product by heat decomposition at the optimum condition is about 23.5%. 6. Calorific values 0：1 were 9820 Kcal/kg.