• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.4
• /
• pp.332-338
• /
• 2007

In this paper, the three modified space vector modulation methods are suggested in order to control effectively the shoot-through time at Z-source inverter. Both the switching patterns of three modulation methods and the modulation signals with a variation of shoot-through time are analyzed. The optimum modified space vector modulation method is determined by both the control range of the shoot-through time and the symmetry of the switching pattern and modulation signal. The performances of modulation methods are verified with the simulation results with 32-bit DSP.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.269-272
• /
• 2008

LGP is a key component of LCD back light unit because it determines the brightness and sharpness of display image. Usually, it has optical patterns fabricated on the bottom surface. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme helped find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• Korean Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.26-33
• /
• 2008

To understand the effect of water temperature on growth pattern of Stephanodiscus sp., we weekly or biweekly investigated in the lower part of the Nakdong River from 1994 to 2006 and performed a laboratory experiment. Stephanodiscus was the most dominant species among phytoplankton in winter when low flow persisted and the high abundances of the species were maintained from December to February. Three strains of Stephanodiscus sp. were isolated for the in vitro experiment from the Nakdong River in January 2005. Over the water temperature range of $4^{\circ}C$ to $20^{\circ}C$, the growth patterns of Stephanodiscus sp. were different in the short-term batch culture. The maximum cell density of Stephanodiscus sp. was observed at approximately $5^{\circ}C$ in the river systems, but the optimum water temperature of Stephanodiscus sp. was $10^{\circ}C$ for the growth in the laboratory experiment. However, the proliferation of Stephanodiscus sp. was related to low water temperature in the Nakdong River.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.77-84
• /
• 2011

Tire manufactures have dealt with noise problem by varying the pitch of the tread. The various formulas for the variations are generally determined differently, however. Often these variations are based on a combination of trial and error, intuition, and economics. Some manufactures have models and analogs to test tread patterns and their variations. These efforts, however practical, do not determine the best variation beforehand or guarantee the best results. For this reason it was felt that a general mathematical approach for determining the best variation was needed. Moreover, the method should be completely general, easy to use, and sufficiently accurate. This paper discusses a mathematical method called Mechanical Frequency Modulation(MFM) which meets the above requirements. Thus, MFM pertains to computing an irregular time sequence of events so that the resulting excitation spectrum is shaped to a preferred form. The first part of this paper treats the theoretical basis for computing an optimum variation ; the second part discusses experimental results and simulation program which corroborate the theory.

• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.1-11
• /
• 2019

Recently, studies on the development of flexible electronic devices by combining flexible materials and a conductor have been actively performed as interest in wearable devices. Especially, carbon nanotubes (CNT) or graphene coating have been used to construct a circuit to induce improvement in flexibility and rigidity. Various technologies have been developed in the surface coating of conductive materials, which are key to the manufacture of flexible electronic devices. Surface coating products with 3D coating and micro-patterns have been proposed through electrospinning, electrification, and 3D printing technologies. As a result of this advanced surface coating technology, there is a growing interest in manufacturing gradient conductive surfaces. Gradient surfaces have the advantage that they are adapted to apply a gentle change or to inspect optimum conditions in a particular region by imparting continuously changing properties. In this study, we propose a manufacturing technique to produce a continuous gradient conductive surface by combining a partial stretching of elastomer and a conductive material coating, and introduce experimental results to confirm its performance.

• Structural Engineering and Mechanics
• /
• v.47 no.1
• /
• pp.119-129
• /
• 2013

Nonlinear Static Procedures (NSPs) have been developed as a practical tool to estimate the seismic demand of structures. Several researches have accomplished to minimize errors of NSPs, namely pushover procedures, in the Nonlinear Time History Analysis (NTHA), as the most exact method. The most important issue in a typical pushover procedure is the pattern and technique of loading which are extracted based on structural dynamic fundamentals. In this paper, the coefficients of modal force combination is focused involving a meta-heuristic optimization algorithm to find the optimum load pattern which results in a response with minimum amount of errors in comparison to the NTHA counterpart. Other parameters of the problem are based on the FEMA recommendations for pushover analysis of building structures. The proposed approach is implemented on a high-rise 20 storey concrete moment resisting frame under three earthquake records. In order to demonstrate the effectiveness and robustness of the studied procedure the results are presented beside other well-known pushover methods such as MPA and the FEMA procedures, and the results show the efficiency of the proposed load patterns.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.23-30
• /
• 2001

The cavitation noise of high-speed propellers was experimentally studied using new measurement device in KRISO cavitation tunnel. A series of cavitation noise tests were carried out for 6 propellers with various sections, loading distributions, and a different area ratio. From the experimental results, the noise characteristics for various cavitation patterns and the noise performance for a series of propellers were analyzed. These can be used for full-scale prediction study of the noise and optimum design of high-speed propellers.

• Solar Energy
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2000

In this research, the intensity of solar energy, which was injected to the different angle plane every hour day by day, was technically documented and quantitatively analyzed through actual observations. In order to group every days into days with similar intensity, graph was drawn with respect to time for every day and each area value under the curve was calculated. Then, the search for grouped days having similar intensity curve patterns was carried out. In order to maximize the efficiency of solar energy systems, the optimum incident angle of absorber plate was derived.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.4
• /
• pp.287-295
• /
• 2019

Privacy films are typically manufactured by combining black resin and transparent louver-shaped patterns. The use of black resin results in excellent light-shielding. However, black resin can reduce the transmittance of privacy films at the front viewing angle. In this study, we applied $SiO_2/SiON$ multi-layer thin films on a privacy film to maintain transmittance at the front viewing angle and improve light-shielding at the side viewing angle. We determined the optimum combination of thicknesses of the $SiO_2/SiON$ multi-layer stacks to increase the overall transmittance; the light shielding could be maximized at the side viewing angle.

• Asian Journal of Business Environment
• /
• v.11 no.1
• /
• pp.17-25
• /
• 2021

Purpose: This study extends previous empirical work on the threshold effects of institutions on the relationship between infrastructure and economic growth. It does so by using three sub-indices of institutions as the threshold variable in place of aggregate index. This is with a view to determining the roles of the sub-indices in the nexus between infrastructure and economic growth. Research design, data and methodology: The analysis is based on a dynamic panel threshold regression model using a panel data set comprising 41 countries in Sub-Saharan Africa over the sample period of 1996-2015. Data are obtained from Ogbaro (2019). Results: The study finds that infrastructure exerts significant positive effects on economic growth below and above the threshold values of the three sub-indices, with higher effects above the threshold values. Results also show that on average, the Sub-Saharan African countries are not able to satisfy any of the threshold conditions, which accounts for their poor growth experience. Conclusion: The study concludes that countries with weak institutions do not benefit maximally from infrastructure development policies. The paper, therefore, recommends that countries in Sub-Saharan Africa need to focus on improving their institutional patterns if they are to reap the optimum benefits from their infrastructure development efforts.