• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.95-103
• /
• 2016

The absolute value management method is widely used in the most of the earth retaining construction, which evaluates the safety by comparing measurement result and management criteria. Therefore, the management criteria is the standard to evaluate the safety of the site, and in other words, the criteria is a direct factor of the evaluation. That means that the safety of the site can not be acquired if the management criteria is not proper, even though the measurement system is perfectly set. However, many of field technicians do not have rely on the current management criteria, and they even recognize the necessity of the revision. Therefore, in this study, the necessity of the revision was studied. Also, the optimum criteria selection and the application were performed based on the test results of earth retaining deflection and probabilistic theory. The absolute value management method was used for this study. The details are tabulated.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.239-244
• /
• 1997

To develope more effective extraction methods for paraquat in soil, some modification methods were accomplished in two different types of soil. For extraction of tightly bound-paraquat, conc. HCl 70ml were added with different shaking times, and then $H_2SO_4$ reflux were performed for an hour. In this case, 60 minutes shaking were optimum and recovery were increased more $1.09{\sim}1.50$ folds(84.0% in high clay contents soil, but 96.7% in low clay contents soil) and the long-time consuming step, filtration were easily done, with decreasing filtration time were shorter 4.6 folds(ca. $11{\sim}14min.$). than general paraquat analytical method(ca. $55{\sim}65min.$). And only $H_2O_2$ digestion with different volume and refluxing time resulted in recovery increasing. Nevertheless, considering analyst's safety, 30ml of $H_2O_2$ addition and 30 minutes reflux were regarded as optimum condition. Although, Kjeldahl digestion with $H_2O_2$ showed relatively high recovery, it is not significant statistically. For extraction of loosely bound-paraquat, 0.01, 0.1, 1.0, 10.0M of $NH_4Cl$ and of $CaCl_2$ compared with $1.5{\sim}24hr$ of different shaking time. There were no loosely bound residues of paraquat.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.125-135
• /
• 1998

This study presents a design method for three-span continuous preflex composite girder bridges (3S-PCB) which imposes prestresses in the negative moment region by lifting or lowering interior supports and the design method is automated by a computer program which incorporates optimal design procedure. The objective function for the design of 3S-PCB minimizes the cost of construction materials and the constraint functions represent the limited dimensions of the design section and the allowable stress for each structural member as given in the specifications. Optimal design procedure used in this study is a modification of existing sequential unconstrained minimization technique (SUMT), a numerical analyses procedure for two-span continuous preflex composite bridges. The optimized design sections determined for each span length are compared with those of simple preflex composite beams (SPCB) and the optimal girder depth is determined by defining the relationship between girder depth and construction material costs.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.423-438
• /
• 2021

The blade of motor grader is used for scattering and leveling the aggregates on the foundation of road construction site. The paper performed a design improvement research of the blade part to enhance the working efficiency of motor graders. The scattering works of aggregates by blade driving were simulated by DEM (discrete element method) of a dynamic code. The four design parameters were selected and a specific leveling scenario for the simulation was determined. The nine blade models were numerically experimented, and the sensitivity of each factors was analyzed. Next, the design factors that influence a blade performance have been selected by ANOVA, and these key design factors were applied to the progressive quadratic response surface method (PQRSM). The optimum set of design factors of the blade was finally proposed.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.75-81
• /
• 1969

In order to obtain a method of scouring of raw silk and degumming of cocoon by the appling of bacterial enzyme of sericinase, a strain of proper bacteria was isolated and some properties of the enzyme produced by the isolated bacteria were studied and the following results were obtained. 1) Optimum pH and temperature were indicating 7.5 and $50^{\circ}C$. and on these conditions, the silk fibroin will get no modification at all. 2) Sericinase activity was inhibited by calcium ion in the free incubation but same ions reacted as an activator in the reaction with substrate. So, degumming of Tussah cocoon which contains calcium oxalate in the cocoon layer will be possible by the treatment of this enzyme. 3) This bacterial sericinase never gives any affection to the fibroin layer of the silk. 4) The factors of smooth-surface condition, damage of fibroin layer, touching, luster and degumming effect of the silk resulting by the enzyme treatment were more appropriate than the results of other scouring methods, saponin, alkali and saponin-alkali using methods. We expect to get the same scouring result that compared with the papain or pancreatin were applied.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1737-1741
• /
• 2014

An HPLC method for determination of naringin was developed to standardize it as a marker compound in Goheung yuzu extract as a functional health food. Optimum results were obtained by C-18 column chromatography using solvent mixtures (A: 0.5% acetic acid, B: acetonitrile) as the stationary phase and mobile phase. The method was fully validated and sensitive with a limit of detection (LOD) of 0.0218 mg/L and limit of quantification (LOQ) of 0.0661 mg/L. The method showed high linearity (coefficient of correlation=0.9986) and high accuracy, as recovery rates of naringin at concentrations of 1, 0.5, 0.1, 0.05 mg/mL were in the ranges of 95.74~98.25%, 97.67~101.01%, 97.33~104.64%, and 95.53~106.82%, respectively. Intra-day and inter-day variation, which are measures of method precision, were 1.39~1.95% and 0.17~1.49%, respectively. Therefore, the method could be used without modification for determination of naringin as a marker compound in Goheung yuzu extracts.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.23-33
• /
• 2004

MDO framework, which provides multidisciplinary system design and optimization environment, requires integration of the analyses codes developed at various computer languages and operating systems, integration of CAD and DBMS, and development of complex GUI. Emphases must be given to the software modification and upgrades in conjunction with the analysis code addition and MDO method implementation. In this study, techniques about system integration and analysis code interface have been studied extensively, and the database design and communication methods which can handle the MDO methods like MDF and CO have been studied. Using the dedicated MDO framework developed for the air vehicle design, the multidisciplinary fighter aircraft wing design has been performed to demonstrate the efficiency and usefulness of the software. Optimum wing configuration is derived using the gradient-based optimization methods within thirty design iterations.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.204-211
• /
• 1995

A target-sensitive liposome was prepared by using a dioleoyl-phosphatidylethanolamine(DOPE) and a palmitic acid coupled antibody(p-IgG). For the preparation of stable PE-liposomes, the key factors such as antibody modification method with palmitic acrid, molar ratio of p-IgG to lipid and the amount of various additives, were examined. The optimum molar ratio of p-IgG to lipid was found to be $2.5{\times}10^{-4}$ and the final concentration of deoxycholate for the stable liposome formation was about 0.09%. Two kinds of target-sensitive liposomes, containing polyclonal anti-SRBC(Sheep Red Blood Cell)-antibody and monoclonal anti-${\beta}$-HCG(Human Chorionic Gonadotropin)-antibody, were successfully prepared. The destabilization of liposomes was examined by measuring the release of calcein entrapped in the liposome vesicles. Calcein was released only when the liposomes were contacted with the specific target cells. The calcein release with non-specific target cells was negligible. From this result, it is clear that p-IgG is indispensible for the maintenance of stable PE-liposome and the calcein release is mainly due to the specific interactions between the liposomes containing antibody and the target cells containing antigen.

• Journal of Adhesion and Interface
• /
• v.8 no.3
• /
• pp.1-8
• /
• 2007

An atmospheric plasma pre-treatment method was applied to polyurethane foam to improve its contact angle and adhesion. In order to investigate the optimum reaction condition of plasma treatment, type of reaction gas (nitrogen, argon, oxygen, air), rate of gas flow (30~150 mL/min), and reaction time (0~30 sec) were examined in a plate plasma reactor. Also, the effects were compared to those of a conventional vacuum plasma pre-treatment system. The result of the surface modification with respect to the treatment procedure was characterized by using SEM and ATR-FTIR. Due to a decrease of the contact angle of polyurethane foam, the greatest adhesion strength was achieved at a flow rate of 100 mL/min and at a reaction time of 10s for N2 gas. Consequently, the atmospheric plasma treatment reduced the contact angle of the polyurethane foam and also resulted in the improvement of the peel strength.

• Advances in nano research
• /
• v.8 no.1
• /
• pp.1-11
• /
• 2020

In order to develop a new adsorbent for removal of formaldehyde from aqueous solution, surface modification of TiO₂ nanoparticles was performed with 2,4-Dinitrophenylhydrazine (DNPH) that have a strong affinity to the formaldehyde. Sodium dodecyl sulfate (SDS) surfactant was used to improve the DNPH grafting to TiO₂ surface. Modified adsorbents were characterized by SEM, TEM, XRD, EDX and FTIR. Since the COD level in wastewaters including formaldehyde is considerable, it is necessary to determine the COD content of the synthetic wastewater. In order to determine the optimal removal conditions, the effect of contact time (60-210 min), pH (4-10) and adsorbent dosage (0.5-1.5 g/L) on adsorption and COD removal efficiencies were studied, using response surface method. EDX and FTIR analysis confirmed the presence of nitrogen-containing functional groups on the modified TiO₂ surface. The maximum formaldehyde adsorption and COD removal efficiencies by modified TiO₂ were about 15.65 and 7.35% higher than the unmodified nanoparticles respectively. Therefore, the grafting of nano-TiO₂ with DNPH would greatly improve its formaldehyde adsorption efficiency. The optimum conditions determined for a maximum formaldehyde removal of 99.904% and a COD reduction of 94.815% by TiO₂/SDS/DNPH nanocomposites were: adsorbent dosage 1.100 g/L, pH 7.424 and the contact time 183.290 min.