• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.859-867
• /
• 2014

This study was conducted to evaluate the optimum dietary lipid level in juvenile river puffer. Five semi-purified diets were formulated with corn oil to contain graded levels of lipid levels of 6, 9, 12, 15 and 18%. Fish averaging $8.32{\pm}0.02$ g randomly were fed the experimental diets in triplicate groups for 8 weeks. After the 8-weeks feeding trial, weight gain and specific growth rate of fish fed the 9% diet were significantly higher than those of fish fed the 15 and 18% diets (P<0.05) but there was not significantly different from that of fish fed the 6, 9 and 12% diets. Feed efficiency and protein efficiency ratio of fish fed the 6, 9 and 12% diets were significantly higher than those of fish fed the 18% diet (P<0.05). Visceralsomatic index of fish fed 18% diet was significantly higher than that of fish fed the 6% diet (P <0.05) but there was not significantly different from that of fish fed the 9, 12, 15 and 18% diets. No significant differences were observed in condition factor, hepatosomatic index and whole body composition among all the fish groups. Serum cholesterol and triglyceride fish fed of 18% diet were significantly higher than that of fish fed the other diets (P<0.05). Optimum dietary lipid levels by using broken-line model and by using second order polynomial were estimated at 7.01% and 8.98% for the maximum growth of fish respectively. Therefore, these results suggested that the optimum dietary lipid level could be greater than 7.01% but less than 8.98% for the maximum growth in juvenile river puffer.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.915-922
• /
• 2014

This study was conducted to evaluate the optimum dietary protein level in juvenile river puffer. Five semi-purified diets were formulated by using casein to contain graded levels of protein levels of 35, 45, 50, 55 and 65%. Fish averaging $8.56{\pm}0.04g$ were randomly assigned to one of five experimental diets in triplicate groups for 8 weeks. After the 8-weeks of feeding trial, weight gain and feed efficiency of fish fed 45, 50 and 55% diets were significantly higher than those of fish fed 35 and 65% diets (P<0.05). Protein efficiency ratio of fish fed the 35% diet was significantly higher than those of fish fed 65% diet (P<0.05), but there were no significant difference among those of fish fed 45, 50 and 55% diets. Specific growth rate of fish fed 50% diet was significantly higher than those of fish fed 35 and 65% diets (P<0.05), but there was no significant difference among those of fish fed 45, 50 and 55% diets. No significant differences were observed in condition factor, hepatosomatic index, visceralsomatic index and survival among those of fish fed all the diets. Optimum dietary protein levels by using broken-line model and by using second order polynomial were estimated at 45.9% and 51.6% for the maximum growth of fish respectively. Therefore, these results suggested that the optimum dietary protein level could be greater than 45.9% but less than 51.6% for the maximum growth in juvenile river puffer.

• Journal of Energy Engineering
• /
• v.16 no.1 s.49
• /
• pp.32-39
• /
• 2007

Coal pyrolysis processes vary with the origin and rank of coal. It is difficult to generalize the characteristics of coal pyrolysis reaction because the process consists of numerous reactions including pyrolysis, gasification, and combustion. To find out the optimum process condition it is necessary to determine the condition fur each coal from the smatter scale experiment. In this study pressurized ($2kg_{f}/cm^{2}$) fluidized bed, low temperature ($735{\sim}831^{\circ}C$) gasification using Kideco coal was performed. The reaction condition and product gas composition were determined from the variables including steam flow rate, coal feed rate and air flow rate. Optimum reaction condition was determined from the concentrations of $H_{2}$, and CO in the product gas. The ratio of air/coal was 4.45 and that of steam/coal was 0.21 respectively. The concentrations of CO and $H_{2}$ decreased with the increase of $CO_{2}$. It is important to control the feed rates of coal and steam because the reaction temperature rapidly increased when the combustion reaction dominates over the gasification reaction. The concentrations of CO and $H_{2}$ were 18%, 17% respectively from the continuous operating condition.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.318-331
• /
• 1995

The c - axis oriented single crystal of $LiNbO_3$ and $LiNbO_3$ : 5mol%MgO was success-fully grown by Floating zone method using halogen lamp as a heat source. The effects of the sintering condition of the feed rod and the atmosphere gas during the crystal growth on the be havior of the feed rod/melt interface were studied for growing crystal with the high quality, and then, the optimum growth conditions were determined by studying the experimental param eters, such as gas flow rate, pulling rate, rotation speeds of the feed rod and the seed. The grown crystals were analyzed using the chemical etching to observe the tch pattern and the ICP (Inductively Coupled Plasma) to determine the composition uniformity and the impurity content of Fe. The effects of additive (5 mol % MgO) on the transmittance and refractive index was, also, analyzed. In order to compare the nonlinear optical oharacteristics of $LiNbO_3$ with those of the other optical materials, the nonlinear optical refractive index ($n_2$) was calcu l lated using the measured refractive index.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.3
• /
• pp.221-226
• /
• 2000

Cassia mimosoides var. nomame was grown at five seeding rates (10, 20, 30, 40 and 50 kg/ha) from March 31 to September 21, 1998 at Cheju to determine influence of seeding rate on agronomic characters, and forage yield and quality. Days to flowering increased from 126 to 129 days as seeding rate increased from 10 to 50 kg/ha. The plant height increased from 86 to 99 cm as seeding rate was increased from 10 to 30 kg/hac and then decreased to 93 cm at a rate of 50 kglha. With increasing seeding rate, stem diameter quadratically decreased and the number of branches and green leaves per plant linearly decreased but the number of withering leaves per plant linearly increased. As seeding rate increased &om 10 to 30 kg/ha, fresh forage, dry matter, crude protein, and total digestible nutrients (TDN) yield increased 'from 30.7 to 49.1, 7.5 to 12.2, 0.90 to 1.57 and 4.09 to 7.09 MTha, respectively, and then decreased with further increased seeding rates. Crude protein, ether extract, nitrogen free extract, and TDN wntent increased 12.1 to 14.2% 2.2 to 2.9%, 35.1 to 39.2%, 54.8 to 60.3% respectively, but crude fiber wntent decreased 39.8 .to 33.3% and crude ash declined 4.9 to 3.8% as seeding rate increased from 10 to 50 kgiha. The optimum seeding rate to obtain the highest TDN yield was estimated to be 36kglha. (Key words : Cassia mimosoides var. nomame, Seeding rate, Forage yield, Forage quality)

• Membrane Journal
• /
• v.8 no.2
• /
• pp.94-101
• /
• 1998

The oil separation is effectively performed from the oil containing alkaline cleaner solution by using a backflushed ultrafiltration system, where hollow fibers commercially made by polyacrylonitrile copolymer are bundled. Backflushing to reduce membrane fouling during crossflow ultrafiltration is investigated. Experimental observations allow us to understand the behavior of permeate flux according to the relative operating conditions, and determine the optimum condition of normal operation and backflushing. The maximum improvement of net permeate flux owing to backflushing was found to be about 23 % with the condition of 10 min/40 sec for the cycle of normal/backflushing operations. Note that, however, the maintenance of stable permeate flux is lost as the duration of normal operation is increased. The permeate flux depends on both the backflushing pressure and the feed flow rate. It is obvious that there is a critical velocity of feed flow, in which permeate flux is practically independent of backflushing pressure. Above this critical value, the permeate flux is proportional to an appropriate power of the backflushing pressure, $\Delta P_{back}^n$, where exponent n is enhanced with increasing feed velocity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.1
• /
• pp.87-91
• /
• 2019

Effects of feeding frequency on the growth performance of juvenile starry flounder Platichthys stellatus were investigated. One thousand fifty fishes were distributed into 15 of 500-L flow-through tanks. Triplicate groups of were fed experimental diet with five feeding frequency (one meal every two days, one meal a day, two meals a day, three meals a day and four meals a day) for 9 weeks. Weight gain and specific growth rate (SGR) of fish fed two meals a day were higher than those of fish fed one meal 2 days and one meal a day, but not different from those of fish fed three meals a day and four meals a day. Feed consumption of fish fed two meals a day was not different from that of fish fed three meals a day and four meals a day. Feed efficiency (FE) and protein efficiency ratio (PER) of fish fed two meals a day were higher than those of fish fed all other diets, except for three meals a day. These results suggest that the optimal feeding frequency is two meals a day for the optimum growth performance of juvenile starry flounder under the experimental conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1628-1633
• /
• 2005

Three hundred and twenty four one day old mixed sex broiler chicks were assigned at random into 9 treatment groups. The experimental design was a 3${\times}$3 factorial arrangement. During the starter period (week 1-3), chicks were fed ad libitum. A cornsoybean meal based diet contained 23% crude protein, 3,200 kcal/kg metabolizable energy (NRC, 1994), and supplemented with organic or inorganic forms of chromium. Two organic chromium products, chromium yeast (Cr-Yeast from Alltech Biotechnology Corporation Limited) and chromium picolinate (Cr-Pic) were supplemented at the rate of 200, 400 and 800 ppb. One inorganic product, chromium chloride, was supplemented at the rate of 200, 400 and 800 ppb. During the finishing period (week 4-7), the corn-soybean meal based diet contained 20% crude protein, 3,200 kcal/kg metabolizable energy (NRC, 1994), and the same levels of chromium as in the starter period were added. No significant difference was observed among treatment groups in average daily gain, feed intake, body weight gain, feed conversion ratio and mortality. The carcass percentage of broilers receiving 200 and 400 ppb organic chromium (Cr-Yeast or Cr-Pic) was significantly increased (p<0.01). In addition, the supplementation of organic chromium reduced (p<0.05) breast meat fat content but increased breast meat protein content. The addition of chromium in the diet had no effect on boneless breast, skinless boneless breast, boneless leg, skinless boneless leg but reduced percentage of sirloin muscle. Total cholesterol and triglycerides were reduced by organic Cr supplementation. Supplementation with 200 and 400 ppb of both Cr-Yeast and Cr-Pic showed the lowest total cholesterol. The effects of type of Cr on HDL and LDL were variable, however, LDL increased with increasing level of Cr supplementation. This trial indicates that organic chromium tended to improve growth performances and carcass composition, reduced total cholesterol and triglycerides. The optimum level of organic chromium supplementation was at 200 ppb.

• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.223-229
• /
• 2015

The application of coagulation for feed water pretreatment prior to microfiltration (MF) process has been widely adopted to alleviate fouling due to particles and organic matters in feed water. However, the efficiency of coagulation pretreatment for MF is sensitive to its operation conditions such as pH and coagulant dose. Moreover, the optimum coagulation condition for MF process is different from that for rapid sand filtration in conventional drinking water treatment. In this study, the use of response surface methodology (RSM) was attempted to determine coagulation conditions optimized for pretreatment of MF. The center-united experimental design was used to quantify the effects of coagulant dose and pH on the control of fouling control as well as the removal organic matters. A MF membrane (SDI Samsung, Korea) made of polyvinylidene fluoride (PVDF) was used for the filtration experiments. Poly aluminum chloride (PAC) was used as the coagulant and a series of jar tests were conducted under various conditions. The flux was $90L/m^2-h$ and the fouling rate were calculated in each condition. As a result of this study, an empirical model was derived to explore the optimized conditions for coagulant dose and pH for minimization of the fouling rate. This model also allowed the prediction of the efficiency of the coagulation efficiency. The experimental results were in good agreement with the predictions, suggesting that RSM has potential as a practical method for modeling the coagulation pretreatment for MF.

• Resources Recycling
• /
• v.28 no.2
• /
• pp.23-30
• /
• 2019

An color sorting technique was introduced to recycle End-of-life automobile shredded bumpers. The color sorting is a innovate method of separating the differences in the color of materials which are difficult to separate in gravity and size classification by using a camera and an image process technique. Experiments were planned and optimal conditions were derived by applying BBD (Box-Behnken Design) in the reaction surface method. The effects of color sensitivity, feed rate and sample size were analyzed, and a second-order reaction model was obtained based on the analysis of regression and statistical methods and $R^2$ and p-value were 99.56% and < 0.001. Optimum recovery was 94.1% under the conditions of color sensitivity, feed rate and particle size of 32%, 200 kg/h, and 33 mm respectively. The recovery of actual experiment was 93.8%. The experimental data agreed well with the predicted value and confirmed that the model was appropriate.