• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.259-267
• /
• 1995

This study was conducted to evaluate the effects of pressure and dissolved oxygen concentration on the activated slut비e and to determine the optimum depth of deep shaft process. Some results from this study were summarized as follows. 1. It is considered that low sludge product in the activated sludge system maintaining high dissolved oxygen concentration is attributed to the increase of endogeneous respiration rate caused by the increase of aerobic zone in the sludge floe. 2. The increase of dissolved oxygen concentration does not affect to the increase of organic removal efficiency greatly and therefore the limiting factor is the substrate transfer into the inner part of floe. 3. The yield coefficient, Y is decreased in proportion to the increase of oxygen concentration. In this study, Y values arre ranged from 0.70 to 0.41 according to the variation of dissolved oxygen concentration from 18.0mg/$\ell$ to 258 mg/$\ell$. 4. The optimum depth of deep shaft process should be determined within the limits of non-toxicity to the microorganism and it is about loom in this study.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.20-25
• /
• 1998

Optimum conditions of the cellulose-hydrolysis reaction with mixed enzymes(cellulase extracted from Penicellium funiculosum mixed with $\beta$-glucosidase extracted from Almod) were investigated to increase the production of glucose from cellulose. Experimental result showed that optimum conditions fro pH, activity ratio of $\beta$-glucosidase to cellulase, concentration of mixed enzymes, concentration of cellulose as a substrate, and temperature range were 4.2, 0.4, 0.8, U/mL, 40 g/L, and 37$\pm$3$^\circ C$, respectively. In these conditions, quantities of glucose productions by using mixed enzymes were larger than those by using cellulase at optimum conditions.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.309-315
• /
• 2018

The applicability of the ultrafiltration process for color removal from dye-containing water has been examined in this study. The optimization of major process variables, such as dye concentration, chitosan concentration and transmembrane pressure on permeate flux and color removal efficiency was investigated. To find the most appropriate results for the experiment, the Box-Wilson experimental design method was employed. The results were correlated by a response function and the coefficients were determined by regression analysis. Permeate flux variation and color removal efficiency determined from the response functions were in good agreement with the experimental results. The optimum conditions of chitosan concentration, dye concentration and pressure were 50 mg/l, 50 mg/l and 3 bars, respectively for the highest permeate flux. On the other hand, optimum conditions for color removal efficiency were determined as 50 mg/l of dye concentration, 50 mg/l of chitosan concentration and 1 bar of pressure.

• Journal of Environmental Health Sciences
• /
• v.35 no.4
• /
• pp.295-303
• /
• 2009

A simulated wastewater containing the dye Rhodamine B (RhB) was electrolytically treated using a three-dimensional electrode reactor equipped with granular activated carbon (GAC) as particle electrode. The effect of type of packing material (GAC, ACF, Nonwoven fabric fiber coated with activated carbon), amounts of GAC packing (25-100 g), current (0.5-3 A) and electrolyte concentration (0.5-3 g/l) was evaluated. Experimental results showed that performance for RhB decolorization of the 3 three-dimensional electrodes lie in: GAC > Nonwoven fabric fiber > ACF. When considered RhB decolorization, oxidants concentration and electric power, optimum GAC dosage was 50 g. Generated concentration of 3 oxidants ($ClO_2$, free Cl, $H_2O_2$) was increased with increase of applied current, however optimum current for RhB degradation was 2.5 A. The oxidants concentration was increased with increase of NaCl concentration and optimum NaCl dosage for RhB degradation was 1.5 g/l.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.5
• /
• pp.415-420
• /
• 2014

This study was conducted to establish optimum conditions for coagulation of konjac jelly as well as antimicrobial activity by concentration of $Ca(OH)_2$. Hardness, gumminess, and chewiness of konjac jelly increased according to concentration of konjac powder, the key material of konjac jelly. The highest sensory evaluation score was acquired with konjac jelly made with 3% konjac powder. A $Ca(OH)_2$ concentration of 0.4-0.6% as a coagulation agent was optimum for coagulation of konjac jelly. Further, sensory score was highest at a $Ca(OH)_2$ concentration of 0.6%. All populations of bacteria, yeast, and mold in konjac jelly were restrained by $Ca(OH)_2$ in a concentration- dependent manner. Furthermore, all tested microorganisms were strictly restrained at $1.0{\times}10^{-2}$ N of $Ca(OH)_2$.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.47-59
• /
• 2012

The effects of organic calcium compounds (ACa) tree-spray for late growing stage on the mineral nutrition concentration of fruit, russet and quality in 'Fuji' apple were investigated. Optimum spray concentration of leaves by ACa tree-spray during late growth stage were ranged 125 times among 1,000 times. Also, Optimum concentration of fruits was effected to 125 times. Optimum spray times of leaves effected by ACa 500 times tree-spray during late growth stage were effective in one times (Sept. 25) and three times (Sept. 25, Oct. 5, 15). Also, Optimum times concentration of fruit skin was effected to one times (Sept. 25) and fruit flesh was effected two times (Sept. 25, Oct. 5) and three times (Sept. 25, Oct. 5, 15). Phytotoxicity by tree-spray of ACa concentration and times different not occur to leaf and fruit.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.201-206
• /
• 2004

In order to investigate the optimum conditions for the effective ozone formation in a dielectric barrier discharge, measurements of ozone concentration were carried out for various conditions such as the gap length, the dielectric material and the operating gas. It was found that the optimum discharge conditions differed exceedingly in the types of operating gases and dielectric materials. In dry air, dielectric material with low dielectric constant and thermal conductivity, which might contribute to the restriction of the gas temperature rise in the discharge region, proved effective in obtaining both high ozone yield and concentration. The optimum gap length was considered to be in the range of 600-800 mm. In oxygen, using a quartz glass disk as a dielectric material, the required condition to obtain the high ozone yield and concentration was expanded.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.273-278
• /
• 1991

Methanol assimilating bacterium, Pseudomonas sp. ILS-003 was used to investigate the optimum conditions for the production of $poly-{\beta}-hydroxybutyric$ acid from methanol. For PHB production, the optimum initial pH was 6.4 and the optimum temperature was $30^{\circ}C$. Also the optimum methanol concentration was found to be 1.0%(v/v). In the PHB production, $(NH_4)_2SO_4$ was the most effective nitrogen source and the optimum concentration was 0.8 g/l, which was eqivalent to 17.4 in C/N ratio. Also, deficiency of the 2 valence metal ions in the medium had stimulating effect on PHB accumulation. Under the optimum substrate concentration, successive feeding of 0.25%(v/v) methanol was the most effective on PHB production. Under the optimum conditions, 1.94 g/l of PHB and 2.78 g/l of dry biomass were produced in 96 hours, and the yield was 69.8%(w/w).

• The Korean Journal of Mycology
• /
• v.31 no.2
• /
• pp.77-83
• /
• 2003

For the purpose of utilizing cellulose resources by cellulolytic enzymes of Roseofomes subflexibilis, it's cultural conditions for the production of cellulolytic enzymes in synthetic media were investigated. The results obtained were summarized as follows : The optimum temperature and pH for the enzyme production were $30^{\circ}C$ and pH 4.0, respectively. Among the carbon sources, glucose was good for the production of cellulase. The optimum concentration of saccharose as 1.2%. As a organic nitrogen source, yeast extract was good for the mycelial growth. The optimum concentration of yeast extract as 1.5%. As a inorganic nitrogen source, $NH_{4}H_{2}PO_{4}$ was good for the mycelial growth. The optimum concentration of $NH_{4}H_{2}PO_{4}$ were 1.1%. The mineral salt of $Al_{2}(SO_{4})_{3}$ was effective and the optimum concentration was 0.1 M.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.163-170
• /
• 1997

Solubility on $(LiBr+CaCl_2)$ in water has been measured systematically and compared with those of pure LiBr. It has been observed that there exists optimum value of $CaCl_2(LiBr+CaCl_2)$ in solubility when total$(LiBr+CaCl_2)$ concentration is higher than 57wt%. As total concentration increases up to 65wt%, it is found that the optimum value also increases monotonically. From the experimental results, a master plot has been constructed, with which optimum ratio of LiBr to $CaCl_2$ can be found in terms of total concentration. Vapor pressure of $H_2O/(LiBr+CaCl_2)$ solution with optimum contents of $CaCl_2$ has been observed to be changed negligibly at relatiely low temperature. However, as temperature increases, it is found that increasement in vapor pressure is significant.