• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.58.2-58.2
• /
• 2010

This paper deals with the simulation of solid particle coating technology via supersonic nozzle in vacuum environment to devote as an aerosol-deposition device. In order to improve efficiencies of nozzle and coating process, effects of shockwave, nozzle geometry, and substrate location were studied computationally under a fixed chamber pressure of 0.01316 bar which is nearly vacuous. Shockwave is the important factor affect to entire flow because shockwave in the jet flow dissipates the kinetic energy of the flow in the supersonic condition. Results show that various nozzle geometries have significant effect on the supersonic flow and we know that the supersonic nozzle should be optimized to minimize the loss of the flow. Another parameter, the distance between substrate and nozzle tip, shows little effect in this study.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.22-26
• /
• 2013

Fiber laser welding was performed on SUS Materials metal bellows. The results can be summarized as follows: When we tried to change welding focus location. we get the best welding line when focus location placed 0mm. In product welding, We could make a satisfactory product in constant area by applying optimized conditions and show a table that is able to help producer easily to apply it to manufacturing. In comparison with existing TIG and plasma welding, welded bellows by fiber laser has faster processing speed, smaller thermal effect, very narrow welding area and fine surface.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.921-924
• /
• 2005

Diesel generator sets with resilient mounts often experience resonances by major excitations which come from diesel engine and their foundation with rigid body modes. Because their natural frequency is determined by moment of inertia and stiffness of resilient mount vibration problems are resolved by changing location and stiffness of resilient mounts. But the calculated natural frequencies are inaccurate due to uncertainty of the inertia and mount stiffness. So this result can be useless on the design stage. In this paper, the stiffness of mount is evaluated on result from mount stiffness test in laboratory and generator set vibration test and a simple calculation method for moment of inertia is proposed. Based on these data, the procedure to select optimized mount stiffness and location on the design stage is set up.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.23-27
• /
• 2006

Rubber is used in many industrial products, such as hoses, rubber belts, and oil seals. In particular, more than 200 rubber parts are used in automobiles. The design technology of these parts is largely dependent on field experience, which leads to lengthy and expensive developing procedures. However, with the help of recent developments in nonlinear computer analysis, new rubber products can be developed at low cost. In this study, rubber injection molding design variables, such as location and number of gates, were optimized using computer-aided engineering with the cross-WLF equation to produce CLIP rubber products made from ethylene propylene diene monomer(EPDM). The validity of the proposed design was evaluated by comparison with actual forming results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.67-72
• /
• 2014

Zigbee is a wireless communication technology optimized for Wireless Sensor Network environment. Implementation of location estimation system is based on Zigbee. In this paper, we implement mobile information system using zigbee technology. The proposed system is composed of mobile terminal software and mobile reader softwrae. We also used our hardware in previous system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1963-1969
• /
• 2009

This paper introduces method to estimate pollutant negative influence to polymer type insulator according to the international standard. To accomplish this goal, effective sample collecting method was surface was collected directly with the same dimension. Distilled Through this method pollute is easily and accurately collected. The second step is pollutant analysis. Several analyze item is selected such as quantity, conductivity, contact angle, Optical Microscope(OM), IR spectrometer(FT-IR), Equivalent Salt Deposit Density(ESDD), Thermal Analyzer(TA) and ICP-AES. The third step, best represent tunnel was selected considering location, length and natural surroundings. Also to consider the difference at inside the tunnel, several bracket insulators were selected along to the location. To make the result precise, above procedure was repeated several times at the same target. Finally relation among type of train, numbers of movement, surroundings, length will be considered in combination with the pollution. With this result pollute map for KORAIL could be accomplished and inspect period will be optimized case by case.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.746-751
• /
• 2009

We propose a dynamic time allocation method in cooperative multiplexing with partial relaying system. This method uses a linear programming and considers protocol that is based on relaying of partial information bits followed by cooperative multiplexing. In this protocol, regardless of the location of relay, the allocation time for each transmission time slots are constant. Using a dynamic time allocation method with considering the location of relay, we can find optimal transmission time slots, and show that the system capacity is optimized.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.72-78
• /
• 2022

The aim of this research is to improve the effectiveness of digital media advertising because current advertisements -in digital signage - indiscriminately appeals to the general public rather than to a specific target. In order to deliver efficient and customized advertisement information, an IoT human body detection sensor mounted on digital signage detected human faces and then classified them firstly by gender. The digital signage here is a smart digital signage that can analyze facial signals, discriminate them based on patterns, and apply the extracted data by displaying the corresponding information to the user. In addition, by identifying the customer's location approaching the smart digital signage and displaying the optimized content information for the customer's location through an algorithm, the digital signage can dramatize the advertisement Thus, this is a study meant forimproving information efficiency while reducing noise and driving power waste generated from unnecessary digital information reproduction.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.19-20
• /
• 2015

Since 2013, Seoul Metropolitan Government (SMG) has introduced big data initiatively in administration and put into practices in transportation, safety, welfare in order to overcome limited resources and conflicting interests. For establishing a new midnight bus service, SMG prepared optimized midnight bus routes by analyzing big data from mobile phone Call Data Record (CDR) through collaboration with a telecommunication company. Despite of limited budget and resources, newly identified routes can cover over 42% of the citizen with 9 routes and less than 1% of buses compare with day time operation. In addition to solve transportation problem, SMG utilizes big data to resolve location selection problem for choosing new facility locations such as life double cropping centers and senior citizen leisure centers. As results, SMG demonstrates big data as a good tool to make policies and to build smarter city by overcome space-time limitation of resources, mediation of conflicts, and maximizes benefit of the citizen.

• Journal of Information Processing Systems
• /
• v.19 no.5
• /
• pp.576-589
• /
• 2023

To upgrade home style recommendations and user satisfaction, this paper proposes a personalized and optimized recommendation algorithm for interior design style based on local social network, which includes data acquisition by three-dimensional (3D) model, home-style feature definition, and style association mining. Through the analysis of user behaviors, the user interest model is established accordingly. Combined with the location-based social network of association rule mining algorithm, the association analysis of the 3D model dataset of interior design style is carried out, so as to get relevant home-style recommendations. The experimental results show that the proposed algorithm can complete effective analysis of 3D interior home style with the recommendation accuracy of 82% and the recommendation time of 1.1 minutes, which indicates excellent application effect.