• 한국수소및신에너지학회논문집
• /
• 제31권6호
• /
• pp.546-552
• /
• 2020

In this study, optimization research was conducted through statistical analysis with the aim of maximizing the efficiency of organic matter reduction and hydrogen production by applying electrolysis process at sewage treatment plant. Statistical analysis and optimal operating conditions of organic matter removal efficiency and H2 generation, which varied with various conditions in the electrolysis process, were derived using response surface methodology. As a result, 1,268 μS/cm of conductivity, 350 A current, and pH 3.2 was found to be the optimum condition to reach the desired value as 38% of organic matter reduction and 2.58 L/min of H2 production. The experiment also determined that the optimization study was reliable. Base on this study, it was confirmed that the removal of organic matter and hydrogen production could be stably by applying the electrolysis process in the sewage treatment plant.

• Journal of Microbiology and Biotechnology
• /
• 제1권3호
• /
• pp.157-162
• /
• 1991

Conditions for glutathione production in E. coli cells which possess pGH501 (2 gshI+gshII) were studied. In terms of ATP supply for the glutathione synthesis, two different systems have been constructed and compared. When the acetate kinase reaction of E. coli was used for ATP generation, 20 mM of L-cysteine was completely converted to glutathione by toluene-treated E. coli cells (100 mg/ml) harboring pGH501 within 2 h at $37^{\circ}C$. However, considering the economical aspects, the glycolytic pathway of yeast was chosen as a better system for ATP generation. The optimal concentrations of reactants for glutathione production were determined to be as follows; 80 mM L-glutamate, 20 mM L-cysteine, 20 mM glycine, 20 mM $MgCl_2$, 50 mM potassium phosphate buffer (pH 7.5), 400 mM glucose, polyoxyethylene stearylamine ($5\;\mul/ml$), toluene-treated E. coli HB101/pGH501 (100 mg/ml), and dried yeast cells (400 mg/ml). The conversion ratio of L-cysteine to glutathione was 80% (about 5 mg/ml) under optimal condition within 6 h at $37^{\circ}C$.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.131-135
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) in shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were performed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67g/ L in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 460rpm : 0.28 : 6%. On the other hand BC yield was 0.42g/g in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 564rpm : 0.21 : 2%. The BC production could be enhanced up to more than 65.3% by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.02g/L in the optimum condition

• 대한산업공학회지
• /
• 제36권4호
• /
• pp.243-247
• /
• 2010

Every products, which made by mass production, is not identical in their size but have variations in some intervals specified by tolerance dimensions. Tolerances play major role in standardization of part and its quality, and also make a huge impact on manufacturing cost. The optimal condition for tolerances is giving the values as loose as possible for low production cost while satisfying quality specification, which usually demand tight control of tolerances. Tolerance analysis is necessary to get an optimal solution for this conflict situation. This paper have studied tolerance analysis for universal joint assembly of vehicle steering system and tried to find useful results of the study for product design and quality control.

• 약학회지
• /
• 제38권6호
• /
• pp.749-755
• /
• 1994

An interspecific fusant strain, Streptomyces MS1 was obtained by protoplast fusion between S. peucetius subsp. caesius and S. platensis. We studied on the fermentation characteristics of the fusant strain. The fermentation products of the fusant MS1 was identical with S. peucetius, but its production of anthracycline was more stable than S. peucetius under various fermentation conditions in regard to acidogenesis of fermentation broth. The optimal medium composition for anthracycline production by fusant MS1 as follows: sucrose 2.0%, glucose 1.0%, soytone 0.7%, $CaCO_3$ 0.2%, $KH_2PO_4$ 0.013%, casamino acids 0.01%, $K_2SO_4$ 0.025%, $MaCl_2\;6H_2O$ 1.024%, 5M $CaCl_2\;5H_2O$ 0.4%, 1N NaOH 0.7%, 20% L-proline 1.5%. In this condition, the productivity of anthracycline was $80{\sim}100\;{\mu}g/ml$.

• 동아시아식생활학회지
• /
• 제14권5호
• /
• pp.443-448
• /
• 2004

In order to investigate the optimal factors for frozen dough production, the freezing and thawing condition such as temperature and time, storage period and the effect of ingredient addition were determined. A pre-fermentation of dough at 30℃ for 120 minutes was appeared to be the best for the production of frozen dough. The dough was frozen at -18℃ and then stored for 7 days. The quality of frozen dough was found to be optimal when thawed at 30℃ for 80 minutes. As ingredient of frozen dough, an addition of 3% of yeast and 4% of butter was good as well as the addition of skim milk and sugar in terms of fermentation capacity after thawing.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.77-83
• /
• 2007

This study was carried out to examine the optimum culture condition for the production of cellulose from Saprolegnia ferax and its physical characteristics. Conclusions obtained from the results of this study were as follows: In producing the cellulose from S. ferex, optimal pH and temperature were 7.0 and $26{\sim}30^{\circ}C$ with a maximum of $26^{\circ}C$, respectively. And, optimal culture period was 11days. WHC and OHC of biocellulose were 3.2(25.04 g/g) times and 3.5(25.75 g/g) times higher than those of commercial ${\alpha}-cellulose$(7.57, 7.25 g/g) respectively. The viscosity of biocellulose is lower than that of commercial ${\alpha}-cellulose$. And the effect of rpm on the viscosity of biocellulose was more than on the that of ${\alpha}-cellulose$.

• 한국미생물·생명공학회지
• /
• 제27권3호
• /
• pp.208-214
• /
• 1999

The condition for immobilization of the partially purified agarase from Bacillus cereus ASK202 and the properties of the immobilized enzyme have been investigated. Agarase was immobilized on various supports by entrapment method. The enzyme immobilized on Na-alginate bead showed the highest activity among those studied. The optimal reaction conditions of the immobilized agarase were obtained in 3%(w/v) Na-alginate for the matrix, bead diameter of 2.5mm, 1 unit of agarase solution and 1.0%(w/v) calcium chloride solution. The optimum pH and temperature of the immobilized agarase were pH and temperature of the immobilized agarase were pH 7.0 and 4$0^{\circ}C$, respectively. Km and Vmax values were 0.5mg/ml.min, respectively. The immobilized agarase conerted agar to agarobiose, and their total conversion ratio under the optimal condition was 89%.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2786-2795
• /
• 2000

Recently, the technology for internal polishing is needed for ultra-clean machining for the prevention of corrosion and pollution of parts is the area of high technology industries such as semiconductor, electronics, telecommunication optics, aerospace, and motors. In this study, an internal polishing system using the magnetic force was developed for the production of ultra-clean tubes with averaged surface roughness ranging from 0.2㎛ to 0.05㎛ or less, and magnetic abrasives composed of WC/Co powder were developed, After finding the optimal condition on each, machining characteristics using newly developed abrasive were analyzed. Form the results obtained by experimental design method, the optimal polishing condition was analyzed and, thhereafter internal polishing was done.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.184-193
• /
• 2014

Machine vision systems is applied for various industries such as optimize your spending, automate your production and maximize your efficiency. This research is effective for most optimal light condition of machine vision that technology was applied bald outside human visual acuity. Image processing converts a target image captured by a CCD camera into a digital signal and then performs various arithmetic operations on the signal to extract the characteristics of the target, such as points, lines, circles, area and length. The mathematical concepts of convolution and the kernel matrix are used to apply filters to signals, to perform functions such as extracting edges and reducing unwanted noise. This research analyze and compares matching ratio with reference image and search for optimal lighting condition in accuracy that user wants coming input image according to brightness change of lighting.