• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1508-1517
• /
• 2015

Optimal Power dispatch is the short-term decision of the optimal output of a number of power generation facilities, to meet the system demand, with the objective of Power dispatching at the lowest possible cost, subject to transmission lines power loss and operational constraints. The operational constraint includes power balance constraint, generator limit constraint, and emission dispatch constraint and valve point effects. In this paper, Opposition based Differential Evolution Algorithm (ODEA) has been proposed to handle the objective function and the operational constraints simultaneously. Furthermore, the valve point loading effects and transmission lines power loss are also considered for the efficient and effective Power dispatch. The ODEA has unique features such as self tuning of its control parameters, self acceleration and migration for searching. As a result, it requires very minimum executions compared with other searching strategies. The effectiveness of the algorithm has been validated through four standard test cases and compared with previous studies. The proposed method out performs the previous methods.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.609-612
• /
• 2007

The HDD (hard disk drive) using Load/Unload (L/UL) technology includes the benefits which are increased areal density, reduced power consumption and improved shock resistance than those of contact-start-stop (CSS). Dynamic L/UL has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. The main design objectives of the L/UL mechanisms are no slider-disk contact or no media damage even with contact during L/UL, and a smooth and short unloading process. In this paper, we focus on lift-off force, pitch static attitude (PSA), roll static attitude (RSA) and dimple point. The "lift-off" force, defined as the minimum air bearing force, is another very important indicator of unloading performance. A large amplitude of lift-off force increases the ramp force, the unloading time, the slider oscillation and contact-possibility. PSA and RSA are also very important parameters in L/UL system and stability of slider is mainly determined by PSA and RSA. Dimple point by PSA and RSA is also important indicator. Therefore we find the optimal dimple point of SFF HDD suspension for improving the unloading performance.

• 산업경영시스템학회지
• /
• 제21권48호
• /
• pp.37-52
• /
• 1998

In many distribution systems important cost reductions and/or service improvements may be achieved by adopting an efficient inventory policy and proper selection of facilities. These efficiency improvements and service enhancements clearly require an integrated approach towards various logistical planning functions. The areas of inventory control and transportation planning need to be closely coordinated. The purpose of this paper is to construct an integrated model that can minimize the total cost of the transportation and inventory systems between multiple origin and destination points, where in origin point i has the supply of commodities and in destination point j requires the commodities. In this case, demands of the destination points are assumed random variables which have a known probability distribution. Using the lot-size reorder-point policy and the safety stock level that minimize total cost we find optimal distribution centers which transport the commodities to the destination points and suggest an optimal inventory policy to the selected distribution center. We also show if a demand greater than one unit will occur at a particular time, we describe the approximate optional replenishment policy from computational results of this lot-size reorder-point policy. This model is formulated as a 0-1 nonlinear integer programming problem. To solve the problem, this paper proposes heuristic computational procedures and a computer program with UNIX C language. In the usefulness review, we show the meaning and validity of the proposed model and exhibit the results of a comparison between our approach and the traditional approach, respectively.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.233-238
• /
• 2004

코너 점(Corner point)은 영상 신호 처리의 패턴 인식에 있어 아주 중요한 정보이다 그래서 지금도 여러 가지 코너 점을 추출하는 연구가 진행되고 있다. 코너 점은 에지 영상에서 8 방향 체인 코드(Chain code)를 적용하여 찾는다. 그런데 에지 선분 기울기가 45도의 정수 배가 되지 않을 때, 8 방향 알고리듬을 그대로 적용하면 문제가 발생된다. 따라서 본 논문에서는 이러한 단점을 보완하면서 최적의 코너 점을 찾기 위해서 수리 형태학과 시각적 개념을 접목하여 코너 점을 처리하는 새로운 알고리듬을 제안한다. 제안한 방법으로 컴퓨터 시뮬레이션 하여 좋은 결과를 보이고 있다. 그래서 제안된 논문의 알고리듬은 공장 자동화 및 선박 레이더 영상의 해안의 영역 파악에도 적용되리라 생각된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.393-403
• /
• 1997

In this paper, we proposed an optimal identification method of identifying the membership func¬tions and the fuzzy rules for the stabilization controller of the nonlinear system by RVEGA( Real Variable Elitist Genetic Algo rithm l. Although fuzzy logic controllers have been successfully applied to industrial plants, most of them have been relied heavily on expert's empirical knowl¬edge. So it is very difficult to determine the linguistic state space partitions and parameters of the membership functions and to extract the control rules. Most of conventional approaches have the drastic defects of trapping to a local minima. However, the proposed RVEGA which is similiar to the processes of natural evolution can optimize simulta¬neously the fuzzy rules and the parameters of membership functions. The validity of the RVEGA - based fuzzy controller was proved through applications to the stabi¬lization problems of an inverted pendulum system with highly nonlinear dynamics. The proposed RVEGA - based fuzzy controller has a swing -. up control mode(swing - up controller) and a stabi¬lization one(stabilization controller), moves a pendulum in an initial stable equilibrium point and a cart in an arbitrary position, to an unstable equilibrium point and a center of the rail. The stabi¬lization controller is composed of a hierarchical fuzzy inference structure; that is, the lower level inference for the virtual equilibrium point and the higher level one for position control of the cart according to the firstly inferred virtual equilibrium point. The experimental apparatus was imple¬mented by a DT -- 2801 board with AID, D/A converters and a PC - 586 microprocessor.

• 한국컴퓨터정보학회논문지
• /
• 제20권7호
• /
• pp.41-47
• /
• 2015

The bandwidth minimization problem (BMP) has been classified as NP-complete because the polynomial time algorithm to find the optimal solution has been unknown yet. This paper suggests polynomial time heuristic algorithm is to find the solution of bandwidth minimization problem. To find the minimum bandwidth ${\phi}^*=_{min}{\phi}(G)$, ${\phi}(G)=_{max}\{{\mid}f(v_i)-f(v_j):v_i,v_j{\in}E\}$ for given graph G=(V,E), m=|V|,n=|E|, the proposed algorithm sets the maximum degree vertex $v_i$ in graph G into global central point (GCP), and labels the median value ${\lceil}m+1/2{\rceil}$ between [1,m] range. The graph G is partitioned into subgroup, the maximum degree vertex in each subgroup is set to local central point (LCP), and we adjust the label of LCP per each subgroup as possible as minimum distance from GCP. The proposed algorithm requires O(mn) time complexity for label to all of vertices. For various twelve graph, the proposed algorithm can be obtains the same result as known optimal solution. For one graph, the proposed algorithm can be improve on known solution.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.105-113
• /
• 2000

디지털 통신시스템에 사용되는 파형 성형 필터를 고정소수점으로 설계하는 방법에 대하여 제시한다. 기존에는 설계가 간단한 RCF(Raised Cosine Filter) 또는 Root Squared RCF를 많이 사용했으나 대역제한 특성이 나쁘고 부동소수점 계수로 설계되는 단점이 있다. 본 논문에서는 혼합 선형계획법을 이용하여 고정소수점 파형 성형 필터를 설계하는 방법을 제시하구 정합 필터로 사용하기 위한 Root Squared 형태에 대해서도 소개한다. 몇 개의 설계 예제를 통하여 제안된 설계 방식이 기존의 RCF나 Root Squared RCF와 비교하여 동일한 성능에서 20%이상 간단히 설계가 가능함을 보이고 있다. 특히 급격한 대역제한이 요구되는 IS-95와 같은 무선 통신시스템에서 표준 필터보다 ISI가 75%이상 개선된 결과를 제시하고 있다.

• 대한산업공학회지
• /
• 제25권4호
• /
• pp.500-509
• /
• 1999

In this paper, we consider an optimal routing problem when point-to-point and point-to-multipoint connection traffics are offered in an ATM network. We propose a mathematical model for cost-minimizing configuration of a logical network for a given ATM-based BISDN. Our model is essentially identical to the previous one proposed by Kim(Kim, 1996) which finds a virtual-path configuration where the relevant gains obtainable from the ATM technology such as the statistical multiplexing gain and the switching/control cost-saving gain are optimally traded-off. Unlike the Kim's model, however, ours explicitly considers the VP's QoS(Quality of Service) for more efficient utilization of bandwidth. The problem is a large-scale, nonlinear, and mixed-integer problem. The proposed algorithm is based on the local linearization of equivalent-capacity functions and the relaxation of link capacity constraints. As a result, the problem can be decomposed into moderate-sized shortest path problems, Steiner arborescence problems, and LPs. This fact renders our algorithm a lot faster than the previous nonlinear programming algorithm while the solution quality is maintained, hence application to large-scale network problems.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.531-532
• /
• 2014

현재 인터렉티브 건 라이드 기반의 슈팅 게임에서 사용되고 있는 조준점은 가시성이 낮다. 본 연구는 기존 체감형 아케이드 게임의 문제점을 극복하기 위해 FPS게임에서 사용되고 있는 조준점을 본 인터렉티브 건 라이드 슈팅게임에 적용해 가시성을 개선 하고자 한다. 본 연구는 20대 대학생들을 대상으로 가시성의 효율이 높아졌는지를 실험을 통해 규명하고자 하며 본 연구에서 도출한 결과를 통해 최적화된 조준점의 기준을 찾아보고, 라이드 기반 슈팅게임에서 이를 적용하여 실제 상용화 되는 게임에서 사용 가능한지 적합성 여부를 판단해 보고자 한다.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.11-19
• /
• 2009

A number of trend test methods, i.e., Military Handbook test and Laplace test etc., have been applied to investigate recurrent failures trend in repairable systems. Existing methods provide information about only existence of trend in the system. In this paper, we propose a new change-point test based on the Schwarz Information Criterion(SIC). The change-point approach is more informative than other trend test methods in that it provides the number of change-points and the location of change-points if it exists, as well as the existence of change-point for recurrent failures. The change-point test is applied to nine 300MW generating units operated in East China. We confirm that the change-point test has a potential for establishing optimal preventive maintenance policy by detecting change-point of failure rate.