• Asian-Australasian Journal of Animal Sciences
• /
• 제28권1호
• /
• pp.143-150
• /
• 2015

The objective of this study was to evaluate the effects of different litter mixture compositions on bedding system temperature, pH and volatile fatty acid and ammonia-N ($NH_3$-N) content, and the serum physico-chemical parameters and growth indices of calves. Thirty-two Limousin calves ($280{\pm}20kg$) were randomly assigned to four groups (n = 8 for each group) according to the bedding system used: i) control with soil only (CTR); ii) mixture with 50% paddy hulls (PH), 30% saw dusts (SD), 10% peat moss (PM) and 10% corn cobs (CC) (TRT1); iii) mixture with 15% PH, 15% SD, 10% PM, 40% CC, and 20% corn stover (CS) (TRT2); iv) mixture with 30% PH, 10% PM, 40% CC, and 20% CS (TRT3). The litter material combinations of different treatments were based on the cost of bedding system materials in China. The cost of four treatments from low to high: Control$NH_3$-N level (271.83 to 894.72 mg/kg) was lowest for TRT1 (p<0.0001) and highest for TRT2 (p<0.0001). The acetate, propionate and butyrate levels were highest for the control group (p<0.0001). In all the groups, the pH value (6.90 to 9.09) increased at the beginning and later remained stable at below 9.09. The temperature of deep litter increased at the first week and reached the maximum ($42.1^{\circ}C$) on day 38. 3,5,3'-Triiodothyronine ($T_3$) levels in the TRT1 group animals (p<0.0001) were lower than those in the control and TRT2 animals. 3,5,3',5'-Tetraiodothyronine ($T_4$) in the TRT1 group (p = 0.006) was lower than that in the other treatment groups. Cortisol (COR) in the control and TRT1 group was lower (p<0.0001) than that in the TRT2 and TRT3 groups. Corticosterone (CORt) in the control group was higher (p<0.0001) than that in the treatment groups. The findings indicate that the deep litter bedding systems provided better conditions for animal health and growth performance compared with the control system. Furthermore, the litter composition of TRT1 was found to be optimal among the three treatment groups.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.38-43
• /
• 2009

The optimization of the welding parameters was studied to maximize the weldability and minimize the amount of spatter in the MAG welding of automotive steel sheets under different shielding gas composition ratio. JS-EFSC, JS-SPHC steel plates and Ar mixture gases were used as a substrate and shielding gas for welding respectively. The five welding parameters were selected through preliminary experiments and their effects on the weldability were analyzed. Experiments were performed using the Taguchi experimental method. As results, appropriate range for welding could be achieved. Amount of spatter in 80%Ar+20%$CO_2$ shielding gas was 20% of that of $CO_2$welding. Therefore, in terms of high productivity and welding cost, Ar mixture gas(80%Ar+20%$CO_2$) was recommended as a shielding gas for application of MAG process, indicating the low spatter and good weld quality.

• 한국건설순환자원학회논문집
• /
• 제11권1호
• /
• pp.1-8
• /
• 2023

본 연구에서는 시멘트 제조 공정 CO₂ 배출을 저감하기 위해 철강 슬래그로 시멘트 원료로 사용되는 석회석 사용량을 대체할수 있는 수준을 시뮬레이션 방법을 이용하여 평가하였다. 이를 위해 석회석을 비롯한 시멘트 각 원료와 석회석 대체원료로서 고로 서냉 슬래그, 전로 슬래그, KR 슬래그의 화학성분을 바탕으로 최적 시멘트 원료 배합을 도출하는 시뮬레이션 분석을 수행하였다. 분석 결과, 슬래그 대체원료는 일정 수준의 CaO를 함유해 석회석 사용량을 일부 저감하는 비탄산염 대체원료로 사용할 수 있음을 확인하였다. 동시에 각 원료의 최대 사용 가능 수준을 도출하였는데. 특히 이들 원료를 각기 사용하는 경우보다 혼합해서 사용하면 석회석 저감 효과를 증대해 탈탄산 반응에 의한 CO₂ 배출을 저감하는데 기여할 수 있는 것으로 평가되었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.325-328
• /
• 2001

Teicoplanin is a glycopeptide antibiotic produced by Actinoplanes teichomyceticus novo sp. A TCC 31121. It is active against Gram-positive bacteria and it is under evaluation for use in man. Teicoplanin mixture in fermentation broth contains major amounts of teicoplanin $A_1$ and $A_2$ and a minor amount tcicoplanin of $A_3$. Commercial teicoplanin product is composed of five major components of very similar polarity, designated T-$A_2$-l, 2, 3, 4 and 5, and the more polor component, designated T -$A_3$. The culture conditions were studied in order that hydrophilic teicoplanin $A_2$ components are more produced but hydrophobic teicoplanin $A_1$ with lower bioactivity are less produced in submerged culture. Effects of culture pH and nutrients on the biosynthes ratio of teicoplanin $A_1$ and $A_2$ were confirmed in flask culture using MOPS buffer system through TLC, bioautography and bioassay. It was elucidated that optimal pH is 7.4 for teicoplanin $A_2$ biosynthesis but is 5.2 for teicoplanin $A_1$ biosynthesis, and that trace elements stimulate $A_2$ production but malt extract stimulate $A_1$production.

• 한국조리학회지
• /
• 제7권3호
• /
• pp.145-161
• /
• 2001

In odor to develop fillet-type seasoner and mixed powder-type seasoner using smoked mackerel as primary material, processing conditions of the mackerel meat and flavoring extract from various materials were examined. The approximate composition of mackerel meat and mixed powde-type seasoner using mackerel as primary material were 10.9 and 11.7%, for moisture 79.1 and 57.2% for crude protein, 5.3 and 2.9% for crude lipid, and 4.3 and 24.6% for crude ash, respectively. It was suitable to simmer raw mackerel in 3% chitooligosaccaride solution at 8$0^{\circ}C$ for 10 min., for the enhancement of reaction their meat and chitooligosaccharide. Considering effect of type of woodsmoke on organoletic properties of mackerel after smoking, oak and mixture(oak wood ＋ citrus wood = 1 : 1) were superior to another woodsmoke, the smoking conditions favoring the most overall preference were 8$0^{\circ}C$, 25min. for smoking time, 20$0^{\circ}C$, 20min. for baking, and 10$0^{\circ}C$. 4hrs. for drying. The optimal material mixing ratio for mixed powder-type seasoner was powder of smoked mackerel 60%, dried anchovy 15%, dried sea tangle 10%. The most appropriate extraction condition of mixed powder seasoner with packing tea bag(10g/bag) was 98$^{\circ}C$ for 5min. in the boiling water.

• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.322-327
• /
• 2023

A design of experiments was evaluated in optimizing MOF-5 synthesis for acetylene adsorption. At first, mixture design was used to optimize precursor concentration, terephthalic acid, zinc acetate dihydrate and N,N-dimethylformamide. More specifically, 13 conditions with various molar ratios were designed by extreme vertices design method. After preparing the samples, XRD, N₂ physisorption and SEM analysis were performed for their characterization. Moreover, acetylene adsorption experiments were carried out over the samples under identical conditions. The optimal precursor composition for MOF-5 synthesis was predicted on a molar basis as follows: terephthalic acid : acetate dihydrate : dimethylformamide = 0.1 : 0.4 : 0.5. Thereafter, multi-level factorial design was designated to investigate the effect of synthesis reaction conditions such as temperature, time and stirring speed. By the statistical analysis of 18 samples designed, 4 reaction parameters were determined for additional adsorption experiments. Therefore, MOF-5 prepared under the synthesis time and temperature of 100 ℃ and 12 h, respectively, showed the maximum adsorption capacity of 15.1 mmol/g.

• 한국식생활문화학회지
• /
• 제24권3호
• /
• pp.321-330
• /
• 2009

This study was conducted to develop a recipe for a nutritional cookie containing chungkukjang powder that had a composition of ingredients and a texture that resulted in a high preference by all age groups. Wheat flour was partially substituted with chungkukjang powder to reduce its content. Response surface methodology was then used to analyze the measured results, which showed 16 experimental points including 2 replicates for chungkukjang powder, butter and sugar. The compositional and functional properties were then measured, after which these values were applied to a mathematical model. A canonical form and perturbation plot revealed the influence of each ingredient on the final mixture. The results of the sensory evaluation showed significant values with respect to color (p<0.01), texture (p<0.05) and overall quality (p<0.05). Taken together, the results of this study indicated that the optimal ratio was 26.57 g of chungkukjang powder, and 82.08 g of butter for every 52.36 g of sugar. The physical and chemical sensory measurements were then evaluated by a t-test, and the results revealed significant differences in the flavor of the optimized cookie when compared to the control cookie.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2014년도 춘계학술대회 및 임시총회
• /
• pp.21-21
• /
• 2014

A edible mushroom, Hypsizygus marmoreus is commercially cultivated in Northeast Asia. Japan's annual production is 110,000ton or more. Since 2002, cultivation is expanded in Korea. To investigate the morphological, cultural and microscopic characteristics of Hypsizygus marmoreus, 109 isolates were collected from Korea and other countries. Clamp connection, chlamydospore and arthrospore were present in all tested isolates of H. marmoreus except HYM-002 and HYM-004. Also pilealtrama, gilltrama, basidia, basidiospore and cystidia of fruiting body were no difference among the isolates in the present investigation. Morphological characteristics of fruiting body was that color of pileus was brown and white, irregular as marble, the average size 12~22mm and stipes was $46{\sim}91{\times}6{\sim}10mm$. Isolates HYM-031, HYM-047 and HYM-109 formed grayish-brown pileus with a faint pattern. Molecular analysis with RAPD and ITS rDNA sequence analysis were also performed to check the genetic relationships among H. marmoreus isolates. Based on the RAPD analysis using the URP-PCR, all isolates of H. marmoreus were clustered into large 3 groups but more than 90% showed high similarity. In addition, morphological and geographical differences have been classified as an independent cluster. The brown and white strains enclosed in same cluster. So genetically no significance difference was observed between these two strains. ITS gene sequences of 16 selected isolates which were 640 bp long, were aligned and compared. The similarity in ITS sequence was 94.8 to 99.1% among tested isolates and the H. marmoreus isolates in GeneBank. In conclusion the tested isolates were H. marmoreus. Morphological and molecular observations proved that all tested isolates were belonging to H. marmoreus. For the stable artificial cultivation, composition of optimum media, mature period and light condition were established. Optimal formula of artificial cultivation medium was Douglas sawdust: corn cob: soybean meal: wheat bran = 40:30:15:15. In addition, 7% rice bran and 3% yellow sucrose was the most effective composition for spawn's liquid medium. For the maturation of the isolates was favorable for growing for 20 to 30 days at $25^{\circ}C$ and the LED lights in mixture of white and blue was good for growth period. For effective growth, the temperature, humidity and aeration control in every step was important.

• 공업화학
• /
• 제33권4호
• /
• pp.402-407
• /
• 2022

실험계획법을 이용하여 MOF-5 합성공정의 최적화에 대한 연구를 수행하였다. 먼저 전구체의 농도를 최적화 하기 위하여 혼합물 설계법을 이용하였다. 합성에 사용되는 세 가지 전구체인 terephthalic acid, zinc acetate dihydrate, N,N-dimethylformamide의 농도비를 extreme vertices design methods로 최적화 하였다. MOF-5 합성을 위한 최적의 농도는 1 mol : 2.7 mol : 40 mol로 예측되었다. 이후, 온도, 시간 및 교반 속도와 같은 합성 반응 조건이 합성에 미치는 영향을 분석하기 위해 다단계 요인 설계법을 사용하였다. 수행된 통계 분석에 따라 교반 속도는 후속 연구에서 제외되었다. 합성시간과 온도를 고려한 합성 공정 최적화는 중앙 조성 설계법을 이용하였다. 13번의 합성 실험을 통해 도출된 2차 모델 방정식을 이용하여 결과를 추정하였다. 설계에 사용된 모델에 의하면 119 ℃ 및 10.4 h 조건에서 합성된 MOF-5가 최대의 결정화도를 가지는 것으로 예측되었다.

• 한국식품조리과학회지
• /
• 제24권1호
• /
• pp.76-83
• /
• 2008

The aim of this study was to use arrowroot powder to develop a recipe for a nutritional cookie having the optimal composition of ingredients and texture to elict a strong preference response in all age groups. Wheat flour was partially substituted with arrowroot powder to reduce the wheat flour content of the cookie. Measurements were made and analyzed according to the Response Surface Methodology technique, which showed 16 experimental points including 2 replicates for arrowroot powder, yellow sugar and butter. The compositional and functional properties of the test were measured, and the values obtained were applied to a mathematical model. A canonical form and perturbation plot showed the influence of each ingredient on the final mixture product. The result of sensory evaluation showed very significant values for color (p<0.01), appearance (p<0.001), texture (p<0.05), overall quality (p<0.05), and flavor (p<0.05). Instrumental analysis showed significant values for lightness (p<0.001), redness (p<0.01), yellowness (p<0.01) and spread ratio (p<0.001). The optimal sensory ratios were determined to be 15g for the arrowroot powder, 70 g for sugar and 80 g for butter.